#include <string.h>
#include "..\inc\44b.h"
#include "..\inc\44blib.h"

#define READ_COUNT2 (rTCNTO2 & 0xffff)
#define	MaxBeepFreq	900
#define	MinBeepFreq	100

extern int  Uart_GetIntNum(void);
void SetBeepPwm(unsigned short Freq, unsigned char HiRatio);
void StopBeepPwm(void);
void __irq TIMER2_Int(void);

int Freq;
//unsigned int pwmcnt=0;

/****************************************
 *	PWM (BEEP) test		*
 ****************************************/
void Test_Pwm(void)
{
    int  beginf, endf;
    //int  i;
    
    Uart_Printf("input beginf= (%d--%d): ", MinBeepFreq,MaxBeepFreq);
    beginf = Uart_GetIntNum();
     while (beginf<MinBeepFreq ||beginf>=MaxBeepFreq)
    {
     Uart_Printf("ERROR !!!!  input beginf= (%d--%d): ",MinBeepFreq,MaxBeepFreq);
     beginf = Uart_GetIntNum();
    }
    Uart_Printf("input endf= (%d--%d): ",MinBeepFreq,MaxBeepFreq);
     endf = Uart_GetIntNum();
     while (endf<MinBeepFreq ||endf>=MaxBeepFreq ||endf<beginf )
    {
     Uart_Printf("ERROR !!!!  input endf> beginf (%d--%d) : ",MinBeepFreq,MaxBeepFreq);
     endf = Uart_GetIntNum();
    }

    Uart_Printf("beginf= %d ; endf= %d : ", beginf, endf );
     	 
    rINTMSK=~(BIT_GLOBAL|BIT_TIMER2);
    pISR_TIMER2= (unsigned)TIMER2_Int;
    
    
    Freq=beginf;
    
    rTCFG0 	 = 0xffff00ff;					// set Timer 2&3 prescaler 0
	rTCFG1   = 0x0300;	                // set Timer2 MUX 1/16
    rTCNTB2	 = MCLK/(100*16);				//if set inverter off, when TCNT2<=TCMP2, TOUT is high, TCNT2>TCMP2, TOUT is low
	rTCMPB2  = (rTCNTB2*(100-50))/100;	 //if set inverter on,  when TCNT2<=TCMP2, TOUT is low,  TCNT2>TCMP2, TOUT is high
    rTCON	 = 0x02000;					// manual update
	rTCON    = 0x0d000;					// auto reload, inverter on, start Timer 2,clear manal update bit
	
	
   //for (i=beginf; i<endf; i++)
   // {
      
      
      
      while(Freq<=endf);
      //{
         //Freq=Freq++;
         //Delay(60);
      //}
      //pwmcnt=0;
      //SetBeepPwm( i, 50);
     // Delay(600);
 	//}
	
    StopBeepPwm();
  }

/*void SetBeepPwm(unsigned short Freq, unsigned char HiRatio)
{
	if(Freq>MaxBeepFreq)
		Freq = MaxBeepFreq;
	if(HiRatio>100)
		HiRatio = 100;
	//rTCFG0 	 = 0xffff00ff;					// set Timer 2&3 prescaler 0
	//rTCFG1   = 0x0300;	                // set Timer2 MUX 1/16
	//rTCNTB2	 = MCLK/(Freq*16);				//if set inverter off, when TCNT2<=TCMP2, TOUT is high, TCNT2>TCMP2, TOUT is low
	//rTCMPB2  = (rTCNTB2*(100-HiRatio))/100;	 //if set inverter on,  when TCNT2<=TCMP2, TOUT is low,  TCNT2>TCMP2, TOUT is high
	//rTCON	 = 0x02000;					// manual update
	//rTCON    = 0x0d000;					// auto reload, inverter on, start Timer 2,clear manal update bit
}*/

void StopBeepPwm(void)
{
    rINTMSK=BIT_GLOBAL|BIT_TIMER2;
	rTCON=0x0;
}

 void __irq TIMER2_Int(void)
{
  rI_ISPC=BIT_TIMER2;//clear the pending condition
  Freq=Freq+1;
  rTCNTB2	 = MCLK/(Freq*16);				//if set inverter off, when TCNT2<=TCMP2, TOUT is high, TCNT2>TCMP2, TOUT is low
  rTCMPB2  = (rTCNTB2*(100-50))/100;	 //if set inverter on,  when TCNT2<=TCMP2, TOUT is low, 
  //pwmcnt++;
  //Uart_Printf("%d ",pwmcnt++);
  return;
}