?? os_core.c
字號:
/*
*********************************************************************************************************
* uC/OS-II
* The Real-Time Kernel
* CORE FUNCTIONS
*
* (c) Copyright 1992-2003, Jean J. Labrosse, Weston, FL
* All Rights Reserved
*
* File : OS_CORE.C
* By : Jean J. Labrosse
* Version : V2.76
*********************************************************************************************************
*/
#ifndef OS_MASTER_FILE
#define OS_GLOBALS
#include "ucos_ii.h"
#endif
/*
*********************************************************************************************************
* MAPPING TABLE TO MAP BIT POSITION TO BIT MASK
*
* Note: Index into table is desired bit position, 0..7
* Indexed value corresponds to bit mask
*********************************************************************************************************
*/
INT8U const OSMapTbl[8] = {0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80};
/*
*********************************************************************************************************
* PRIORITY RESOLUTION TABLE
*
* Note: Index into table is bit pattern to resolve highest priority
* Indexed value corresponds to highest priority bit position (i.e. 0..7)
*********************************************************************************************************
*/
INT8U const OSUnMapTbl[256] = {
0, 0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0, 2, 0, 1, 0, /* 0x00 to 0x0F */
4, 0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0, 2, 0, 1, 0, /* 0x10 to 0x1F */
5, 0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0, 2, 0, 1, 0, /* 0x20 to 0x2F */
4, 0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0, 2, 0, 1, 0, /* 0x30 to 0x3F */
6, 0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0, 2, 0, 1, 0, /* 0x40 to 0x4F */
4, 0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0, 2, 0, 1, 0, /* 0x50 to 0x5F */
5, 0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0, 2, 0, 1, 0, /* 0x60 to 0x6F */
4, 0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0, 2, 0, 1, 0, /* 0x70 to 0x7F */
7, 0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0, 2, 0, 1, 0, /* 0x80 to 0x8F */
4, 0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0, 2, 0, 1, 0, /* 0x90 to 0x9F */
5, 0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0, 2, 0, 1, 0, /* 0xA0 to 0xAF */
4, 0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0, 2, 0, 1, 0, /* 0xB0 to 0xBF */
6, 0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0, 2, 0, 1, 0, /* 0xC0 to 0xCF */
4, 0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0, 2, 0, 1, 0, /* 0xD0 to 0xDF */
5, 0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0, 2, 0, 1, 0, /* 0xE0 to 0xEF */
4, 0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0, 2, 0, 1, 0 /* 0xF0 to 0xFF */
};
/*$PAGE*/
/*
*********************************************************************************************************
* FUNCTION PROTOTYPES
*********************************************************************************************************
*/
static void OS_InitEventList(void);
static void OS_InitMisc(void);
static void OS_InitRdyList(void);
static void OS_InitTaskIdle(void);
#if OS_TASK_STAT_EN > 0
static void OS_InitTaskStat(void);
#endif
static void OS_InitTCBList(void);
/*$PAGE*/
/*
*********************************************************************************************************
* GET THE NAME OF A SEMAPHORE, MUTEX, MAILBOX or QUEUE
*
* Description: This function is used to obtain the name assigned to a semaphore, mutex, mailbox or queue.
*
* Arguments : pevent is a pointer to the event group. 'pevent' can point either to a semaphore,
* a mutex, a mailbox or a queue. Where this function is concerned, the actual
* type is irrelevant.
*
* pname is a pointer to an ASCII string that will receive the name of the semaphore,
* mutex, mailbox or queue. The string must be able to hold at least
* OS_EVENT_NAME_SIZE characters.
*
* err is a pointer to an error code that can contain one of the following values:
*
* OS_NO_ERR if the name was copied to 'pname'
* OS_ERR_EVENT_TYPE if 'pevent' is not pointing to the proper event
* control block type.
* OS_ERR_PNAME_NULL You passed a NULL pointer for 'pname'
* OS_ERR_PEVENT_NULL if you passed a NULL pointer for 'pevent'
*
* Returns : The length of the string or 0 if the 'pevent' is a NULL pointer.
*********************************************************************************************************
*/
#if OS_EVENT_EN && (OS_EVENT_NAME_SIZE > 1)
INT8U OSEventNameGet (OS_EVENT *pevent, char *pname, INT8U *err)
{
INT8U len;
#if OS_CRITICAL_METHOD == 3 /* Allocate storage for CPU status register */
OS_CPU_SR cpu_sr;
cpu_sr = 0; /* Prevent compiler warning */
#endif
OS_ENTER_CRITICAL();
#if OS_ARG_CHK_EN > 0
if (pevent == (OS_EVENT *)0) { /* Is 'pevent' a NULL pointer? */
OS_EXIT_CRITICAL(); /* Yes */
*err = OS_ERR_PEVENT_NULL;
return (0);
}
if (pname == (char *)0) { /* Is 'pname' a NULL pointer? */
OS_EXIT_CRITICAL(); /* Yes */
*err = OS_ERR_PNAME_NULL;
return (0);
}
#endif
switch (pevent->OSEventType) {
case OS_EVENT_TYPE_SEM:
case OS_EVENT_TYPE_MUTEX:
case OS_EVENT_TYPE_MBOX:
case OS_EVENT_TYPE_Q:
break;
default:
OS_EXIT_CRITICAL();
*err = OS_ERR_EVENT_TYPE;
return (0);
}
len = OS_StrCopy(pname, pevent->OSEventName); /* Copy name from OS_EVENT */
OS_EXIT_CRITICAL();
*err = OS_NO_ERR;
return (len);
}
#endif
/*$PAGE*/
/*
*********************************************************************************************************
* ASSIGN A NAME TO A SEMAPHORE, MUTEX, MAILBOX or QUEUE
*
* Description: This function assigns a name to a semaphore, mutex, mailbox or queue.
*
* Arguments : pevent is a pointer to the event group. 'pevent' can point either to a semaphore,
* a mutex, a mailbox or a queue. Where this function is concerned, it doesn't
* matter the actual type.
*
* pname is a pointer to an ASCII string that will be used as the name of the semaphore,
* mutex, mailbox or queue. The string must be able to hold at least
* OS_EVENT_NAME_SIZE characters.
*
* err is a pointer to an error code that can contain one of the following values:
*
* OS_NO_ERR if the requested task is resumed
* OS_ERR_EVENT_TYPE if 'pevent' is not pointing to the proper event
* control block type.
* OS_ERR_PNAME_NULL You passed a NULL pointer for 'pname'
* OS_ERR_PEVENT_NULL if you passed a NULL pointer for 'pevent'
*
* Returns : None
*********************************************************************************************************
*/
#if OS_EVENT_EN && (OS_EVENT_NAME_SIZE > 1)
void OSEventNameSet (OS_EVENT *pevent, char *pname, INT8U *err)
{
INT8U len;
#if OS_CRITICAL_METHOD == 3 /* Allocate storage for CPU status register */
OS_CPU_SR cpu_sr;
cpu_sr = 0; /* Prevent compiler warning */
#endif
OS_ENTER_CRITICAL();
#if OS_ARG_CHK_EN > 0
if (pevent == (OS_EVENT *)0) { /* Is 'pevent' a NULL pointer? */
OS_EXIT_CRITICAL(); /* Yes */
*err = OS_ERR_PEVENT_NULL;
return;
}
if (pname == (char *)0) { /* Is 'pname' a NULL pointer? */
OS_EXIT_CRITICAL(); /* Yes */
*err = OS_ERR_PNAME_NULL;
return;
}
#endif
switch (pevent->OSEventType) {
case OS_EVENT_TYPE_SEM:
case OS_EVENT_TYPE_MUTEX:
case OS_EVENT_TYPE_MBOX:
case OS_EVENT_TYPE_Q:
break;
default:
OS_EXIT_CRITICAL();
*err = OS_ERR_EVENT_TYPE;
return;
}
len = OS_StrLen(pname); /* Can we fit the string in the storage area? */
if (len > (OS_EVENT_NAME_SIZE - 1)) { /* No */
OS_EXIT_CRITICAL();
*err = OS_ERR_EVENT_NAME_TOO_LONG;
return;
}
(void)OS_StrCopy(pevent->OSEventName, pname); /* Yes, copy name to the event control block */
OS_EXIT_CRITICAL();
*err = OS_NO_ERR;
}
#endif
/*$PAGE*/
/*
*********************************************************************************************************
* INITIALIZATION
*
* Description: This function is used to initialize the internals of uC/OS-II and MUST be called prior to
* creating any uC/OS-II object and, prior to calling OSStart().
*
* Arguments : none
*
* Returns : none
*********************************************************************************************************
*/
void OSInit (void)
{
#if OS_VERSION >= 204
OSInitHookBegin(); /* Call port specific initialization code */
#endif
OS_InitMisc(); /* Initialize miscellaneous variables */
OS_InitRdyList(); /* Initialize the Ready List */
OS_InitTCBList(); /* Initialize the free list of OS_TCBs */
OS_InitEventList(); /* Initialize the free list of OS_EVENTs */
#if (OS_VERSION >= 251) && (OS_FLAG_EN > 0) && (OS_MAX_FLAGS > 0)
OS_FlagInit(); /* Initialize the event flag structures */
#endif
#if (OS_MEM_EN > 0) && (OS_MAX_MEM_PART > 0)
OS_MemInit(); /* Initialize the memory manager */
#endif
#if (OS_Q_EN > 0) && (OS_MAX_QS > 0)
OS_QInit(); /* Initialize the message queue structures */
#endif
OS_InitTaskIdle(); /* Create the Idle Task */
#if OS_TASK_STAT_EN > 0
OS_InitTaskStat(); /* Create the Statistic Task */
#endif
#if OS_VERSION >= 204
OSInitHookEnd(); /* Call port specific init. code */
#endif
#if OS_VERSION >= 270 && OS_DEBUG_EN > 0
OSDebugInit();
#endif
}
/*$PAGE*/
/*
*********************************************************************************************************
* ENTER ISR
*
* Description: This function is used to notify uC/OS-II that you are about to service an interrupt
* service routine (ISR). This allows uC/OS-II to keep track of interrupt nesting and thus
* only perform rescheduling at the last nested ISR.
*
* Arguments : none
*
* Returns : none
*
* Notes : 1) This function should be called ith interrupts already disabled
* 2) Your ISR can directly increment OSIntNesting without calling this function because
* OSIntNesting has been declared 'global'.
* 3) You MUST still call OSIntExit() even though you increment OSIntNesting directly.
* 4) You MUST invoke OSIntEnter() and OSIntExit() in pair. In other words, for every call
* to OSIntEnter() at the beginning of the ISR you MUST have a call to OSIntExit() at the
* end of the ISR.
* 5) You are allowed to nest interrupts up to 255 levels deep.
* 6) I removed the OS_ENTER_CRITICAL() and OS_EXIT_CRITICAL() around the increment because
* OSIntEnter() is always called with interrupts disabled.
*********************************************************************************************************
*/
?? 快捷鍵說明
復(fù)制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -