## USB Multimedia device configuration#comment "USB Multimedia devices"	depends on USBconfig USB_DABUSB	tristate "DABUSB driver"	depends on USB	---help---	  A Digital Audio Broadcasting (DAB) Receiver for USB and Linux	  brought to you by the DAB-Team	  <http://wwwbode.cs.tum.edu/Par/arch/dab/>.  This driver can be taken	  as an example for URB-based bulk, control, and isochronous	  transactions. URB's are explained in	  <file:Documentation/usb/URB.txt>.	  To compile this driver as a module, choose M here: the	  module will be called dabusb.comment "Video4Linux support is needed for USB Multimedia device support"	depends on USB && VIDEO_DEV=nconfig USB_VICAM	tristate "USB 3com HomeConnect (aka vicam) support (EXPERIMENTAL)"	depends on USB && VIDEO_DEV && EXPERIMENTAL	---help---	  Say Y here if you have 3com homeconnect camera (vicam).	  This driver uses the Video For Linux API. You must say Y or M to	  "Video For Linux" (under Multimedia Devices) to use this driver.	  Information on this API and pointers to "v4l" programs may be found	  at <file:Documentation/video4linux/API.html>.	  To compile this driver as a module, choose M here: the	  module will be called vicam.config USB_DSBR	tristate "D-Link USB FM radio support (EXPERIMENTAL)"	depends on USB && VIDEO_DEV && EXPERIMENTAL	---help---	  Say Y here if you want to connect this type of radio to your	  computer's USB port. Note that the audio is not digital, and	  you must connect the line out connector to a sound card or a	  set of speakers.	  This driver uses the Video For Linux API.  You must enable	  (Y or M in config) Video For Linux (under Character Devices)	  to use this driver.  Information on this API and pointers to	  "v4l" programs may be found at	  <file:Documentation/video4linux/API.html>.	  To compile this driver as a module, choose M here: the	  module will be called dsbr100.config USB_IBMCAM	tristate "USB IBM (Xirlink) C-it Camera support"	depends on USB && VIDEO_DEV	---help---	  Say Y here if you want to connect a IBM "C-It" camera, also known as	  "Xirlink PC Camera" to your computer's USB port.  For more	  information, read <file:Documentation/usb/ibmcam.txt>.	  This driver uses the Video For Linux API.  You must enable	  (Y or M in config) Video For Linux (under Character Devices)	  to use this driver.  Information on this API and pointers to	  "v4l" programs may be found at	  <file:Documentation/video4linux/API.html>.	  To compile this driver as a module, choose M here: the	  module will be called ibmcam.	  This camera has several configuration options which	  can be specified when you load the module. Read	  <file:Documentation/usb/ibmcam.txt> to learn more.config USB_KONICAWC	tristate "USB Konica Webcam support"	depends on USB && VIDEO_DEV	---help---	  Say Y here if you want support for webcams based on a Konica	  chipset. This is known to work with the Intel YC76 webcam.	  This driver uses the Video For Linux API.  You must enable	  (Y or M in config) Video For Linux (under Character Devices)	  to use this driver.  Information on this API and pointers to	  "v4l" programs may be found at	  <file:Documentation/video4linux/API.html>.	  To compile this driver as a module, choose M here: the	  module will be called konicawc.config USB_OV511	tristate "USB OV511 Camera support"	depends on USB && VIDEO_DEV	---help---	  Say Y here if you want to connect this type of camera to your	  computer's USB port. See <file:Documentation/usb/ov511.txt> for more	  information and for a list of supported cameras.	  This driver uses the Video For Linux API. You must say Y or M to	  "Video For Linux" (under Character Devices) to use this driver.	  Information on this API and pointers to "v4l" programs may be found	  at <file:Documentation/video4linux/API.html>.	  To compile this driver as a module, choose M here: the	  module will be called ov511.config USB_PWC	tristate "USB Philips Cameras"	depends on USB && VIDEO_DEV	---help---	  Say Y or M here if you want to use one of these Philips & OEM          webcams:           * Philips PCA645, PCA646           * Philips PCVC675, PCVC680, PCVC690           * Philips PCVC720/40, PCVC730, PCVC740, PCVC750	   * Askey VC010	   * Logitech QuickCam Pro 3000, 4000, 'Zoom', 'Notebook Pro'              and 'Orbit'/'Sphere'           * Samsung MPC-C10, MPC-C30	   * Creative Webcam 5, Pro Ex	   * SOTEC Afina Eye	   * Visionite VCS-UC300, VCS-UM100	   	  The PCA635, PCVC665 and PCVC720/20 are not supported by this driver	  and never will be, but the 665 and 720/20 are supported by other 	  drivers.	  This driver has an optional plugin (called PWCX), which is 	  distributed as a binary module only. It contains code that allow you 	  to use higher resolutions and framerates but may not be distributed 	  as source. But even without this plugin you can these cams for most	  applications.	  See <file:Documentation/usb/philips.txt> for more information and	  installation instructions.	  The built-in microphone is enabled by selecting USB Audio support.	  This driver uses the Video For Linux API. You must say Y or M to	  "Video For Linux" (under Character Devices) to use this driver.	  Information on this API and pointers to "v4l" programs may be found	  at <file:Documentation/video4linux/API.html>.	  To compile this driver as a module, choose M here: the	  module will be called pwc.config USB_SE401	tristate "USB SE401 Camera support"	depends on USB && VIDEO_DEV	---help---	  Say Y here if you want to connect this type of camera to your	  computer's USB port. See <file:Documentation/usb/se401.txt> for more	  information and for a list of supported cameras.	  This driver uses the Video For Linux API. You must say Y or M to	  "Video For Linux" (under Multimedia Devices) to use this driver.	  Information on this API and pointers to "v4l" programs may be found	  at <file:Documentation/video4linux/API.html>.	  To compile this driver as a module, choose M here: the	  module will be called se401.config USB_SN9C102	tristate "USB SN9C10[12] PC Camera Controller support (EXPERIMENTAL)"	depends on USB && VIDEO_DEV && EXPERIMENTAL	---help---	  Say Y here if you want support for cameras based on SN9C101 and	  SN9C102 PC Camera Controllers.	  See <file:Documentation/usb/sn9c102.txt> for more informations.	  This driver uses the Video For Linux API. You must say Y or M to	  "Video For Linux" to use this driver.	  To compile this driver as a module, choose M here: the	  module will be called sn9c102.config USB_STV680	tristate "USB STV680 (Pencam) Camera support"	depends on USB && VIDEO_DEV	---help---	  Say Y here if you want to connect this type of camera to your	  computer's USB port. This includes the Pencam line of cameras.	  See <file:Documentation/usb/stv680.txt> for more information and for	  a list of supported cameras.	  This driver uses the Video For Linux API. You must say Y or M to	  "Video For Linux" (under Multimedia Devices) to use this driver.	  Information on this API and pointers to "v4l" programs may be found	  at <file:Documentation/video4linux/API.html>.	  To compile this driver as a module, choose M here: the	  module will be called stv680.config USB_W9968CF	tristate "USB W996[87]CF JPEG Dual Mode Camera support"	depends on USB && VIDEO_DEV && I2C && VIDEO_OVCAMCHIP	---help---	  Say Y here if you want support for cameras based on OV681 or	  Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips.		  This driver has an optional plugin, which is distributed as a	  separate module only (released under GPL). It allows to use higher 	  resolutions and framerates, but cannot be included in the official 	  Linux kernel for performance purposes.	  See <file:Documentation/usb/w9968cf.txt> for more informations.	  This driver uses the Video For Linux and the I2C APIs. It needs the	  OmniVision Camera Chip support as well. You must say Y or M to	  "Video For Linux", "I2C Support" and "OmniVision Camera Chip 	  support" to use this driver.	  To compile this driver as a module, choose M here: the	  module will be called w9968cf.