ADS GraphicsMaster Single Board ComputerFor more details, contact Applied Data Systems or seehttp://www.applieddata.net/products.htmlThe original Linux support for this product has been provided byNicolas Pitre <nico@cam.org>. Continued development work byWoojung Huh <whuh@applieddata.net>Use 'make graphicsmaster_config' before any 'make config'.This will set up defaults for GraphicsMaster support.The kernel zImage is linked to be loaded and executed at 0xc0400000.Linux can  be used with the ADS BootLoader that ships with thenewer rev boards. See their documentation on how to load Linux.Supported peripherals:- SA1100 LCD frame buffer (8/16bpp...sort of)- SA1111 USB Master- on-board SMC 92C96 ethernet NIC- SA1100 serial port- flash memory access (MTD/JFFS)- pcmcia, compact flash- touchscreen(ucb1200)- ps/2 keyboard- console on LCD screen- serial ports (ttyS[0-2])  - ttyS0 is default for serial console- Smart I/O (ADC, keypad, digital inputs, etc)  See http://www.applieddata.com/developers/linux for IOCTL documentation  and example user space code. ps/2 keybd is multiplexed through this driverTo do:- everything else!  :-)Notes:- The flash on board is divided into 3 partitions.  mtd0 is where  the zImage is stored.  It's been marked as read-only to keep you  from blasting over the bootloader. :)  mtd1 is  for the ramdisk.gz image.  mtd2 is user flash space and can be  utilized for either JFFS or if you're feeling crazy, running ext2  on top of it. If you're not using the ADS bootloader, you're  welcome to blast over the mtd1 partition also.- 16bpp mode requires a different cable than what ships with the board.  Contact ADS or look through the manual to wire your own. Currently,  if you compile with 16bit mode support and switch into a lower bpp  mode, the timing is off so the image is corrupted.  This will be  fixed soon.Any contribution can be sent to nico@cam.org and will be greatly welcome!