/************************************************************/
/* PROJECT NAME: GPIO	                                    */
/* Project:      LPC2100 Training course                    */
/* Engineer:     T Martin        tmartin@hitex.co.uk        */
/* Filename:     main.c                                     */
/* Language:     C                      	                */
/* Compiler:     Keil ARM	V2.0b		                    */
/* Assembler:    				                            */
/*                                                          */
/************************************************************/
/* COPYRIGHT: Hitex UK Ltd 		2005  						*/
/* LICENSE:   THIS VERSION CREATED FOR FREE DISTRIBUTION	*/
/************************************************************/
/* Function:                                                */
/*                                                          */
/* Example 									           		*/
/*															*/
/* Demonstrates Use of the LPC2100 GPIO						*/
/*															*/	
/* Oscillator frequency 12.000 Mhz							*/
/* Target board Keil MCB21000								*/
/************************************************************/

#include <LPC21xx.H> 

void ChangeGPIOPinState(unsigned int state);


int main(void)
{
unsigned int delay;
unsigned int flasher = 0x00010000; 						// define locals

IODIR1 				= 0x00FF0000; 						// set all ports to output

while(1)
{

for(delay = 0;delay<0xA0000;delay++)				  	//simple delay loop
{
;
}

ChangeGPIOPinState(flasher);							//set the state of the ports
flasher 			= flasher <<1;						//shift the active led
if(flasher&0x01000000) 
	flasher 		= 0x00010000;						//Increment flasher led and test for overflow

}
}

void ChangeGPIOPinState(unsigned int state)
{
IOCLR1 				= ~state;  							//clear output pins
IOSET1 				=  state;							//set output pins

}