?? timer.lst
字號:
C51 COMPILER V6.12 TIMER 06/05/2005 15:44:44 PAGE 1
C51 COMPILER V6.12, COMPILATION OF MODULE TIMER
OBJECT MODULE PLACED IN .\timer.OBJ
COMPILER INVOKED BY: d:\Keil\C51\BIN\C51.EXE .\timer.c LARGE BROWSE DEBUG OBJECTEXTEND CODE LISTINCLUDE SYMBOLS
stmt level source
1 #include "global.h"
1 =1 #include "common.h"
1 =2
2 =2 #ifndef EXTERN
3 =2 #define EXTERN extern
4 =2 #endif
5 =2
6 =2 #define uchar unsigned char
7 =2 #define uint unsigned int
8 =2 #define ulong unsigned long
9 =2 #define schar signed char
10 =2 #define sint signed int
11 =2 #define slong signed long
12 =2
13 =2 #define LNum_MAX_OVERGROUND 48
14 =2 #define LNum_MAX_UNDERGROUND 8
15 =2 #define LNum_MAX (LNum_MAX_OVERGROUND+LNum_MAX_UNDERGROUND) //最大樓層數(地上最大48層，地下最大8層)
16 =2 #define ENum_MAX 8 //最大群控電梯數(該宏關系到串口通訊程序的變量地址,慎重修改)
17 =2 #define ARRAY_BYTENUM 7 //"內選數據""內選可停""上呼可停""下呼可停"數組所占字節數
18 =2 #define QuXianShu_Max 8 //最大曲線數
19 =2 #define MenChaoShi_Num 5 //門超時判定數量
20 =2
21 =2 //-------------------------- 輸入數據結構 start ------------------------//
22 =2
23 =2 struct tag_E_FangXiang{ //運動方向
24 =2 uchar bShang; //上
25 =2 uchar bXia; //下
26 =2 };
27 =2 #define E_FangXiang struct tag_E_FangXiang
28 =2
29 =2 struct tag_E_Men{ //門狀態
30 =2 uchar bKaiMenDaoWei; //開門到位
31 =2 uchar bGuanMenDaoWei; //關門到位
32 =2 uchar bKaiMenAnNiu; //開門按鈕
33 =2 uchar bGuanMenZhong; //關門中
34 =2 uchar bMenGuZhang; //門故障
35 =2 };
36 =2 #define E_Men struct tag_E_Men
37 =2
38 =2 struct tag_E_ChengZai{ //承載狀態
39 =2 uchar bKongZai; //空載
40 =2 uchar bQingZai; //輕載
41 =2 uchar bZhongZai; //重載
42 =2 uchar bManZai; //滿載
43 =2 uchar bChaoZai; //超載
44 =2 };
45 =2 #define E_ChengZai struct tag_E_ChengZai
46 =2
47 =2 struct tag_E_TeBie{ //特別狀態
48 =2 uchar bJianXiu; //檢修
49 =2 uchar bSiJi; //司機
50 =2 uchar bZhiShi; //直駛
51 =2 uchar bBaoLiu; //保留
52 =2 uchar bSuoTi; //鎖梯
53 =2 uchar bXiaoFang; //消防
C51 COMPILER V6.12 TIMER 06/05/2005 15:44:44 PAGE 2
54 =2 uchar bJiTing; //急停
55 =2 uchar bGuZhang; //故障
56 =2 uchar bJingGao; //警告
57 =2 };
58 =2 #define E_TeBie struct tag_E_TeBie
59 =2
60 =2 struct tag_E_TongXun{ //通訊狀態
61 =2 uchar bCanChuShiOK; //Can初始化OK
62 =2 uchar bZhiShi; //通訊指示
63 =2 };
64 =2 #define E_TongXun struct tag_E_TongXun
65 =2
66 =2
67 =2 struct tag_E_MenTime{ //門時間
68 =2 uchar cKaiMenTime; //開門時間
69 =2 uchar cGuanMenTime; //關門時間
70 =2 uchar cGMYanChiTime; //自動關門延遲時間
71 =2 };
72 =2 #define E_MenTime struct tag_E_MenTime
73 =2
74 =2 struct tag_E_DianTi{ //電梯數據
75 =2 //來源于Can的輸入數據
76 =2 uchar bZhunBeiHao; //準備好
77 =2 uchar bDanOrQun; //單梯/群控
78 =2 uchar cDangQianCeng; //當前層
79 =2 uchar bDongOrJing; //運動/靜止
80 =2 E_FangXiang FangXiang; //運動方向
81 =2 E_Men Men; //門狀態
82 =2 E_ChengZai ChengZai; //承載狀態
83 =2 E_TeBie TeBie; //特別狀態
84 =2 uchar bNeiXuan[ARRAY_BYTENUM];//內選數據
85 =2 //來源于群控器的輸入數據
86 =2 uchar cPortNo; //控制器端口號
87 =2 uchar cChengZhong; //承重值
88 =2 uchar cZaoGFCeng; //高峰停靠層(早)
89 =2 uchar cWuGFCeng; //高峰停靠層(午)
90 =2 uchar cWanGFCeng; //高峰停靠層(晚)
91 =2 signed char cJuDiCengShu; //起始層距地面樓層數
92 =2 uchar cXueXiCengShu; //學習樓層數
93 =2 uchar cYouXianJi; //優先級
94 =2 uchar cQuXianShu; //曲線數
95 =2 uint nTiSu[QuXianShu_Max]; //各曲線勻速段梯速
96 =2 uint nJiaSuDu; //額定加速度
97 =2 uint nZhuanSu; //電機轉速(取值范圍:1400-1500 單位:轉/分)
98 =2 uchar cPinLv; //電機頻率(取值范圍:30-60 單位:Hz)
99 =2 uchar cEDingTiSu; //額定梯速(取值范圍:5-30 單位:分米/秒)
100 =2 uchar cYunXingTiSu; //運行梯速(取值范圍:5-30 單位:分米/秒)
101 =2 ulong lBMQMaiChongShu; //編碼器脈沖數
102 =2 ulong lDGCMaiChongShu; //等高層脈沖數
103 =2 uchar bQunKong; //群控選中
104 =2 uchar cMinFenPei; //分配最小樓層數
105 =2 uchar cMinCancelFenPei; //取消分配最小樓層數
106 =2 uchar cZuiDiCeng; //可到最底層
107 =2 uchar cZuiGaoCeng; //可到最高層
108 =2 uchar cChaoShiTime[MenChaoShi_Num];//門超時時間
109 =2 E_TongXun TongXun; //通訊狀態
110 =2 E_MenTime MenTime; //門時間
111 =2 uchar bNeiXuanKeTing[ARRAY_BYTENUM]; //內選可停
112 =2 uchar bShangHuKeTing[ARRAY_BYTENUM]; //上呼可停
113 =2 uchar bXiaHuKeTing[ARRAY_BYTENUM]; //下呼可停
114 =2 //2004.05.19 added by LHM (為解決撤銷外呼追加)
115 =2 uchar bLingSuXinHao; //零速信號
C51 COMPILER V6.12 TIMER 06/05/2005 15:44:44 PAGE 3
116 =2 uchar bBenCengKaiMen; //本層開門
117 =2 //end
118 =2 };
119 =2 #define E_DianTi struct tag_E_DianTi
120 =2
121 =2 struct tag_E_WaiHu{ //外呼狀態
122 =2 uchar bShang[ARRAY_BYTENUM]; //上呼
123 =2 uchar bXia[ARRAY_BYTENUM]; //下呼
124 =2 };
125 =2 #define E_WaiHu struct tag_E_WaiHu
126 =2
127 =2 struct tag_E_InputData{ //輸入數據
128 =2 E_DianTi mDianTi[ENum_MAX];
129 =2 E_WaiHu mWaiHu;
130 =2 };
131 =2 #define E_InputData struct tag_E_InputData
132 =2 //-------------------------- 輸入數據結構 end ------------------------//
133 =2
134 =2 //-------------------------- 輸出數據結構 start ------------------------//
135 =2 struct tag_E_XiangYing{ //外呼響應狀態
136 =2 uchar bShang[ARRAY_BYTENUM]; //上呼
137 =2 uchar bXia[ARRAY_BYTENUM]; //下呼
138 =2 };
139 =2 #define E_XiangYing struct tag_E_XiangYing
140 =2 struct tag_E_Deng{ //外呼響應狀態
141 =2 uchar bShang[ARRAY_BYTENUM]; //上呼
142 =2 uchar bXia[ARRAY_BYTENUM]; //下呼
143 =2 };
144 =2 #define E_Deng struct tag_E_Deng
145 =2
146 =2 struct tag_E_OutputData{//輸出數據
147 =2 E_XiangYing mXiangYing[ENum_MAX];
148 =2 E_Deng mDeng[ENum_MAX];
149 =2 };
150 =2 #define E_OutputData struct tag_E_OutputData
151 =2 //-------------------------- 輸出數據結構 end ------------------------//
152 =2
153 =2 //-------------------------- 樓及其他總體數據 start --------------------//
154 =2 struct tag_L_YearMonDat{
155 =2 uchar cYear;
156 =2 uchar cMonth;
157 =2 uchar cDate;
158 =2 uchar cWeek;
159 =2 };
160 =2 #define L_YearMonDat struct tag_L_YearMonDat
161 =2
162 =2 struct tag_L_HourMin{
163 =2 uchar cHour;
164 =2 uchar cMinute;
165 =2 uchar cSecond;
166 =2 };
167 =2 #define L_HourMin struct tag_L_HourMin
168 =2
169 =2 struct tag_L_SysTime{
170 =2 L_YearMonDat mYearMonDat;
171 =2 L_HourMin mHourMinSec;
172 =2 };
173 =2 #define L_SysTime struct tag_L_SysTime
174 =2
175 =2 struct tag_L_GaoFeng{ //高峰信息
176 =2 L_HourMin lStartTime; //高峰開始時間
177 =2 L_HourMin lEndTime; //高峰結束時間
C51 COMPILER V6.12 TIMER 06/05/2005 15:44:44 PAGE 4
178 =2 };
179 =2 #define L_GaoFeng struct tag_L_GaoFeng
180 =2
181 =2 #define L_GaoFeng struct tag_L_GaoFeng
182 =2
183 =2 struct tag_L_Data{ //樓及其他總體數據
184 =2 uchar cLNum; //最大樓層數
185 =2 uchar cENum; //最大群控電梯數
186 =2 uint nTKYanChiTime; //靜態停靠延遲時間
187 =2 L_SysTime mSysTime; //系統時間
188 =2 L_GaoFeng ZaoGF; //早高峰
189 =2 L_GaoFeng WuGF; //午高峰
190 =2 L_GaoFeng WanGF; //晚高峰
191 =2 // uchar cJTTingkaoCeng[ENum_MAX]; //靜態停靠層
192 =2 };
193 =2 #define L_Data struct tag_L_Data
194 =2 //-------------------------- 樓及其他總體數據 end --------------------//
195 =2
196 =2 struct tag_Temp_Timer{
197 =2 long lJingTaiTimer; //靜態計時
198 =2 long lChaoShiTimer[ENum_MAX]; //電梯門超時計時
199 =2 };
200 =2 #define TIMER struct tag_Temp_Timer
201 =2
202 =2 struct tag_PtrALLData{ //所有數據
203 =2 L_Data *pL_Data;
204 =2 E_InputData *pE_InputData;
205 =2 E_OutputData *pE_OutputData;
206 =2 TIMER *pTimer;
207 =2 };
208 =2 #define PtrALLData struct tag_PtrALLData
209 =2
210 =2
211 =2 //Variable Defination
212 =2 EXTERN xdata L_Data mL_Data;
213 =2 EXTERN xdata E_InputData mE_InputData;
214 =2 EXTERN xdata E_OutputData mE_OutputData;
215 =2 EXTERN xdata TIMER m_Timer;
216 =2
217 =2 //xdata L_Data mL_Data;
218 =2 //xdata E_InputData mE_InputData;
219 =2 //Function Refrence
220 =2 void Set0Data(uchar *pData, uchar cMOD);
221 =2 uchar GetArrayData(uchar *pData, uchar cIdx);
222 =2 void SetArrayData(uchar *pData, uchar cIdx, uchar cVal);
223 =2 void SetArrayData_INTERRUPT(uchar *pData, uchar cIdx, uchar cVal);
2 =1 #include<w77c32.h>
1 =2 /*--------------------------------------------------------------------------
2 =2 W77C32.H - preliminary release
3 =2
4 =2 Header file for Winbond microcontroller W77C32
5 =2 Based on the Preliminary Release form March 1999
6 =2
7 =2 Copyright (c) 1988-1999 Keil Elektronik GmbH and Keil Software, Inc.
8 =2 All rights reserved.
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -