?? capture_settings.xml
字號:
<PE_PROJECT_SETTINGS_DOCUMENTATION>
<PE_product_version v="version 2.96 for Freescale HCS12(X) family"/>
<PE_core_version v="Processor Expert Version 0376"/>
<CPU_Bean name="Cpu" type="MC9S12DG128_112">
<Enabled v="Y"/>
<Properties>
<Bean_name v="Cpu"/>
<CPU_type v="MC9S12DG128BCPV"/>
<Oscillator_frequency__MHz_ v="16"/>
<Initialization_priority v="interrupts enabled"/>
<group name="Internal resource mapping">
<Register_block_mapping v="$0000"/>
<Internal_RAM_mapping v="$2000"/>
<boolgroup name="Internal EEPROM" v="Enabled">
<Internal_EEPROM_mapping v="$1800"/>
</boolgroup>
<boolgroup name="Internal FLASH" v="yes">
<Half_memory_only v="no"/>
</boolgroup>
</group>
<group name="CRG clock selection settings">
<Pseudo_Stop v="no"/>
<System_clocks_stop_in_Wait_Mode v="no"/>
<Reduced_Oscillator_Amplitude_in_Wait_Mode v="no"/>
<PLL_stops_in_wait_mode v="no"/>
<Core_stops_in_Wait_Mode v="no"/>
<RTI_stops_in_Wait_Mode v="no"/>
<COP_stops_in_Wait_Mode v="no"/>
</group>
<boolgroup name="BDM Debug support" v="Disabled" />
<group name="Operating mode and external bus settings">
<Boot_operating_mode v="Special Single Chip"/>
<boolgroup name="Operation mode switching" v="no" />
<enumgroup name="External bus settings" v="Special Single Chip">
<group name="Bus control signals">
<boolgroup name="External Clock" v="Enabled">
<ECLK_pin v="PE4_ECLK"/>
</boolgroup>
</group>
</enumgroup>
</group>
<group name="Internal peripherals">
<group name="PWM module">
<Stop_in_wait_mode v="no"/>
<Stop_in_freeze_mode v="no"/>
<boolgroup name="Emergency shutdown" v="Disabled" />
</group>
<group name="ECT module">
<Stop_in_wait_mode v="no"/>
<Stop_in_freeze_mode v="no"/>
<Delay_counter v="not used"/>
<Mode v="Queue"/>
<Buffer v="no"/>
<Modulus_mode v="yes"/>
<Timer_flag_mode v="New value in capture"/>
<_8_bit_Pulse_accumulator_max__count v="no"/>
<group name="Share input action">
<Share_capture_channels_3___7 v="no"/>
<Share_capture_channels_2___6 v="no"/>
<Share_capture_channels_1___5 v="no"/>
<Share_capture_channels_0___4 v="no"/>
</group>
</group>
<group name="I/O module">
<group name="PORT A">
<Reduced_drive_for_all_port_A v="no"/>
</group>
<group name="PORT B">
<Reduced_drive_for_all_port_B v="no"/>
</group>
<group name="PORT E">
<Reduced_drive_for_all_port_E v="no"/>
</group>
<group name="PORT K">
<Reduced_drive_for_all_port_K v="no"/>
</group>
<group name="PORT T">
<Reduced_drive_for_PT0 v="no"/>
<Reduced_drive_for_PT1 v="no"/>
<Reduced_drive_for_PT2 v="no"/>
<Reduced_drive_for_PT3 v="no"/>
<Reduced_drive_for_PT4 v="no"/>
<Reduced_drive_for_PT5 v="no"/>
<Reduced_drive_for_PT6 v="no"/>
<Reduced_drive_for_PT7 v="no"/>
</group>
<group name="PORT P">
<Reduced_drive_for_PP0 v="no"/>
<Reduced_drive_for_PP1 v="no"/>
<Reduced_drive_for_PP2 v="no"/>
<Reduced_drive_for_PP3 v="no"/>
<Reduced_drive_for_PP4 v="no"/>
<Reduced_drive_for_PP5 v="no"/>
<Reduced_drive_for_PP6 v="no"/>
<Reduced_drive_for_PP7 v="no"/>
</group>
<group name="PORT S">
<Reduced_drive_for_PS0 v="no"/>
<Reduced_drive_for_PS1 v="no"/>
<Reduced_drive_for_PS2 v="no"/>
<Reduced_drive_for_PS3 v="no"/>
<Reduced_drive_for_PS4 v="no"/>
<Reduced_drive_for_PS5 v="no"/>
<Reduced_drive_for_PS6 v="no"/>
<Reduced_drive_for_PS7 v="no"/>
</group>
<group name="PORT M">
<Reduced_drive_for_PM0 v="no"/>
<Reduced_drive_for_PM1 v="no"/>
<Reduced_drive_for_PM2 v="no"/>
<Reduced_drive_for_PM3 v="no"/>
<Reduced_drive_for_PM4 v="no"/>
<Reduced_drive_for_PM5 v="no"/>
<Reduced_drive_for_PM6 v="no"/>
<Reduced_drive_for_PM7 v="no"/>
</group>
<group name="PORT J">
<Reduced_drive_for_PJ0 v="no"/>
<Reduced_drive_for_PJ1 v="no"/>
<Reduced_drive_for_PJ6 v="no"/>
<Reduced_drive_for_PJ7 v="no"/>
</group>
<group name="PORT H">
<Reduced_drive_for_PH0 v="no"/>
<Reduced_drive_for_PH1 v="no"/>
<Reduced_drive_for_PH2 v="no"/>
<Reduced_drive_for_PH3 v="no"/>
<Reduced_drive_for_PH4 v="no"/>
<Reduced_drive_for_PH5 v="no"/>
<Reduced_drive_for_PH6 v="no"/>
<Reduced_drive_for_PH7 v="no"/>
</group>
</group>
</group>
<group name="CPU interrupts">
<boolgroup name="ClockMonitorFail" v="Disabled" />
<boolgroup name="IllegalOpcode" v="Disabled" />
<boolgroup name="SWI" v="Disabled" />
</group>
<group name="Enabled speed modes">
<boolgroup name="High speed mode" v="Enabled">
<Internal_bus_clock v="8"/>
<boolgroup name="PLL clock" v="Disabled" />
</boolgroup>
<boolgroup name="Low speed mode" v="Disabled" />
<boolgroup name="Slow speed mode" v="Disabled" />
</group>
</Properties>
<Methods>
<SetHighSpeed v="don't generate code"/>
<SetLowSpeed v="don't generate code"/>
<SetSlowSpeed v="don't generate code"/>
<GetSpeedMode v="don't generate code"/>
<SetIntVect v="don't generate code"/>
<GetIntVect v="don't generate code"/>
<EnableInt v="generate code"/>
<DisableInt v="generate code"/>
<SetWaitMode v="generate code"/>
<SetStopMode v="generate code"/>
<Delay100US v="don't generate code"/>
</Methods>
<Events>
<Event_module_name v="Events"/>
<event name="OnClockMonitorFail" v="don't generate code" />
<event name="OnIllegalOpcode" v="don't generate code" />
<event name="OnReset" v="don't generate code" />
<event name="OnSwINT" v="don't generate code" />
</Events>
<Compiler v="CodeWarrior HC12 C Compiler"/>
<CompilerProperties>
<Compiler v="Metrowerks HC12 C Compiler"/>
<Generate_macros v="yes"/>
<group name="User initialization">
<User_data_declarations>
</User_data_declarations>
<User_code_before_PE_initialization>
</User_code_before_PE_initialization>
<User_code_after_PE_initialization>
</User_code_after_PE_initialization>
</group>
<boolgroup name="Serial monitor support" v="Disabled" />
<Memory_model v="Banked"/>
<boolgroup name="Generate PRM file" v="yes">
<enumgroup name="Stack specification" v="size">
<Stack_size v="128"/>
</enumgroup>
<Set_memory_areas_default v="Click to set default >"/>
<list name="ROM/RAM Areas" v="12">
<group name="Memory Area0">
<boolgroup name="ROM/RAM Area" v="Enabled">
<Name v="RAM_2000"/>
<Address v="8192"/>
<Size v="8192"/>
<Qualifier v="READ_WRITE"/>
</boolgroup>
</group>
<group name="Memory Area1">
<boolgroup name="ROM/RAM Area" v="Enabled">
<Name v="ROM_C000"/>
<Address v="49152"/>
<Size v="16128"/>
<Qualifier v="READ_ONLY"/>
</boolgroup>
</group>
<group name="Memory Area2">
<boolgroup name="ROM/RAM Area" v="Enabled">
<Name v="ROM_4000"/>
<Address v="16384"/>
<Size v="16384"/>
<Qualifier v="READ_ONLY"/>
</boolgroup>
</group>
<group name="Memory Area3">
<boolgroup name="ROM/RAM Area" v="Enabled">
<Name v="ROM_FF10"/>
<Address v="65296"/>
<Size v="112"/>
<Qualifier v="READ_ONLY"/>
</boolgroup>
</group>
<group name="Memory Area4">
<boolgroup name="ROM/RAM Area" v="Enabled">
<Name v="ROM_PAGE3D"/>
<Address v="4030464"/>
<Size v="16384"/>
<Qualifier v="READ_ONLY"/>
</boolgroup>
</group>
<group name="Memory Area5">
<boolgroup name="ROM/RAM Area" v="Enabled">
<Name v="ROM_PAGE3C"/>
<Address v="3964928"/>
<Size v="16384"/>
<Qualifier v="READ_ONLY"/>
</boolgroup>
</group>
<group name="Memory Area6">
<boolgroup name="ROM/RAM Area" v="Enabled">
<Name v="ROM_PAGE3B"/>
<Address v="3899392"/>
<Size v="16384"/>
<Qualifier v="READ_ONLY"/>
</boolgroup>
</group>
<group name="Memory Area7">
<boolgroup name="ROM/RAM Area" v="Enabled">
<Name v="ROM_PAGE3A"/>
<Address v="3833856"/>
<Size v="16384"/>
<Qualifier v="READ_ONLY"/>
</boolgroup>
</group>
<group name="Memory Area8">
<boolgroup name="ROM/RAM Area" v="Enabled">
<Name v="ROM_PAGE39"/>
<Address v="3768320"/>
<Size v="16384"/>
<Qualifier v="READ_ONLY"/>
</boolgroup>
</group>
<group name="Memory Area9">
<boolgroup name="ROM/RAM Area" v="Enabled">
<Name v="ROM_PAGE38"/>
<Address v="3702784"/>
<Size v="16384"/>
<Qualifier v="READ_ONLY"/>
</boolgroup>
</group>
<group name="Memory Area10">
<boolgroup name="ROM/RAM Area" v="Enabled">
<Name v="EEPROM_1800"/>
<Address v="6144"/>
<Size v="2032"/>
<Qualifier v="NO_INIT"/>
</boolgroup>
</group>
<group name="Memory Area11">
<boolgroup name="ROM/RAM Area" v="Enabled">
<Name v="INT_VECTORS"/>
<Address v="65408"/>
<Size v="128"/>
<Qualifier v="READ_ONLY"/>
</boolgroup>
</group>
</list>
</boolgroup>
</CompilerProperties>
</CPU_Bean>
<Bean name="FC161" type="FreeCntr16">
<Enabled v="Y"/>
<Properties>
<Bean_name v="FC161"/>
<Timer v="TC0"/>
<Counter v="ECT"/>
<boolgroup name="Interrupt service/event" v="Enabled">
<Interrupt v="Vtimch0"/>
<Interrupt_priority v="medium priority"/>
</boolgroup>
<Prescaler v="Auto select"/>
<Resolution v="100 µs"/>
<Same_resolution_in_modes v="yes"/>
<Bean_uses_entire_timer v="no"/>
<group name="Initialization">
<Enabled_in_init__code v="yes"/>
</group>
<group name="CPU clock/speed selection">
<High_speed_mode v="This bean enabled"/>
<Low_speed_mode v="This bean disabled"/>
<Slow_speed_mode v="This bean disabled"/>
</group>
</Properties>
<Methods>
<Enable v="don't generate code"/>
<Disable v="don't generate code"/>
<Reset v="generate code"/>
<GetTicks16 v="don't generate code"/>
<GetTicks32 v="don't generate code"/>
<GetTicks64 v="don't generate code"/>
<GetTimeUS v="generate code"/>
<GetTimeMS v="generate code"/>
<GetTimeSec v="don't generate code"/>
<GetTimeReal v="don't generate code"/>
</Methods>
<Events>
<Event_module_name v="Events"/>
<event name="BeforeNewSpeed" v="don't generate code" />
<event name="AfterNewSpeed" v="don't generate code" />
</Events>
</Bean>
<Bean name="Cap1" type="Capture">
<Enabled v="Y"/>
<Properties>
<Bean_name v="Cap1"/>
<Capture_register v="TC2"/>
<Timer_counter v="ECT"/>
<Capture_input_pin v="PT2_IOC2"/>
<Capture_input_signal v=""/>
<Pull_resistor sel_value="no pull resistor" v="autoselected pull"/>
<Edge v="falling edge"/>
<boolgroup name="Interrupt service/event" v="Enabled">
<Capture_interrupt v="Vtimch2"/>
<Capture_priority v="medium priority"/>
<boolgroup name="Overflow support" v="Disabled" />
</boolgroup>
<Prescaler v="Auto select"/>
<Maximum_time_of_event v="200 ms"/>
<Overwrite v="yes"/>
<group name="Initialization">
<Enabled_in_init__code v="yes"/>
<Event_enabled v="yes"/>
</group>
<group name="CPU clock/speed selection">
<High_speed_mode v="This bean enabled"/>
<Low_speed_mode v="This bean disabled"/>
<Slow_speed_mode v="This bean disabled"/>
</group>
</Properties>
<Methods>
<Enable v="don't generate code"/>
<Disable v="don't generate code"/>
<EnableEvent v="don't generate code"/>
<DisableEvent v="don't generate code"/>
<Reset v="generate code"/>
<GetCaptureValue v="generate code"/>
<GetHoldValue v="don't generate code"/>
<Latch v="don't generate code"/>
</Methods>
<Events>
<Event_module_name v="Events"/>
<event name="BeforeNewSpeed" v="don't generate code" />
<event name="AfterNewSpeed" v="don't generate code" />
<event name="OnCapture" v="generate code">
<Event_procedure_name v="Cap1_OnCapture"/>
<Priority v="same as interrupt"/>
</event>
<event name="OnOverflow" v="don't generate code" />
</Events>
</Bean>
</PE_PROJECT_SETTINGS_DOCUMENTATION>
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -