=============================================================================
List of generated methods in project: CCDBIT

THIS TEXT DESCRIPTION IS GENERATED BY THE TOOL. DO NOT MODIFY IT.
=============================================================================

Module "PWM8"      (bean PWM)
   - PWM8_SetRatio16 -This method sets a new duty-cycle ratio. Ratio is expressed as a 16-bit unsigned integer number. 0 - FFFF 
                value is proportional to ratio 0 - 100%.  Note: Calculated duty depends on the timer possibilities and on the 
                selected period.
   - PWM8_SetDutyUS -This method sets the new duty value of the output signal. The duty is expressed in microseconds as a 
                16-bit unsigned integer number.
   - PWM8_SetDutyMS -This method sets the new duty value of the output signal. The duty is expressed in milliseconds as a 
                16-bit unsigned integer number.

Module "Cpu"       (bean MC9S12DG128_112)
   - Cpu_EnableInt -Enable maskable interrupts
   - Cpu_DisableInt -Disable maskable interrupts
   - Cpu_SetWaitMode -Set low power mode - Wait mode.  For more information about the wait mode see documentation of this CPU.  
                Release from Wait mode: Reset or interrupt
   - Cpu_SetStopMode -Set low power mode - Stop mode.  For more information about the stop mode see documentation of this CPU.
   - Cpu_Delay100US -This method realizes software delay. The length of delay is at least 100 microsecond multiply input 
                parameter [us100]. As the delay implementation is not based on real clock, the delay time may be increased by 
                interrupt service routines processed during the delay. The method is independent on selected speed mode.

===================================================================================