/** ###################################################################
**     THIS BEAN MODULE IS GENERATED BY THE TOOL. DO NOT MODIFY IT.
**     Filename  : PWM8.H
**     Project   : CCDBIT
**     Processor : MC9S12DG128BCPV
**     Beantype  : PWM
**     Version   : Bean 02.112, Driver 01.09, CPU db: 2.87.280
**     Compiler  : Metrowerks HC12 C Compiler
**     Date/Time : 2008-3-23, AM 09:59
**     Abstract  :
**         This bean implements a pulse-width modulation generator
**         that generates signal with variable duty and fixed cycle. 
**     Settings  :
**         Used output pin             : 
**             ----------------------------------------------------
**                Number (on package)  |    Name
**             ----------------------------------------------------
**                       3             |  PP1_MOSI1_PWM1_KWP1
**             ----------------------------------------------------
**
**         Timer name                  : PWM01 [16-bit] 
**         Counter                     : PWMCNT01  [172]
**         Mode register               : PWMCTL    [165]
**         Run register                : PWME      [160]
**         Prescaler                   : PWMPRCLK  [163]
**         Compare 1 register          : PWMPER01  [180]
**         Compare 2 register          : PWMDTY01  [188]
**         Flip-flop 1 register        : PWMPOL    [161]
**
**         User handling procedure     : not specified
**
**         Output pin
**
**         Port name                   : P
**         Bit number (in port)        : 1
**         Bit mask of the port        : 2
**         Port data register          : PTP       [600]
**         Port control register       : DDRP      [602]
**
**         Runtime setting period      : none
**         Runtime setting ratio       : calculated
**         Initialization:
**              Aligned                : Left
**              Output level           : low
**              Timer                  : Enabled
**              Event                  : Enabled
**         High speed mode
**             Prescaler               : divide-by-1
**             Clock                   : 3125000 Hz
**           Initial value of            period        pulse width (ratio 5%)
**             Xtal ticks              : 320000        16000
**             microseconds            : 20000         1000
**             milliseconds            : 20            1
**             seconds (real)          : 0.0200000     0.0010000
**
**     Contents  :
**         SetRatio16 - byte PWM8_SetRatio16(word Ratio);
**         SetDutyUS  - byte PWM8_SetDutyUS(word Time);
**         SetDutyMS  - byte PWM8_SetDutyMS(word Time);
**
**     (c) Copyright UNIS, spol. s r.o. 1997-2005
**     UNIS, spol. s r.o.
**     Jundrovska 33
**     624 00 Brno
**     Czech Republic
**     http      : www.processorexpert.com
**     mail      : info@processorexpert.com
** ###################################################################*/

#ifndef __PWM8
#define __PWM8

/* MODULE PWM8. */

#include "Cpu.h"

#pragma CODE_SEG PWM8_CODE


byte PWM8_SetRatio16(word Ratio);
/*
** ===================================================================
**     Method      :  PWM8_SetRatio16 (bean PWM)
**
**     Description :
**         This method sets a new duty-cycle ratio.
**     Parameters  :
**         NAME       - DESCRIPTION
**         Ratio      - Ratio is expressed as an 16-bit unsigned integer
**                      number. 0 - 65535 value is proportional
**                      to ratio 0 - 100%
**         Note: Calculated duty depends on the timer possibilities
**               and on the selected period.
**     Returns     :
**         ---        - Error code, possible codes:
**                           ERR_OK - OK
**                           ERR_SPEED - This device does not work in
**                           the active speed mode
** ===================================================================
*/

byte PWM8_SetDutyUS(word Time);
/*
** ===================================================================
**     Method      :  PWM8_SetDutyUS (bean PWM)
**
**     Description :
**         This method sets the new duty value of the output signal. The
**         duty is expressed in microseconds as a 16-bit unsigned integer
**         number.
**     Parameters  :
**         NAME       - DESCRIPTION
**         Time       - Duty to set [in microseconds]
**                      (0 to 20000 us in high speed mode)
**     Returns     :
**         ---        - Error code, possible codes:
**                           ERR_OK - OK
**                           ERR_SPEED - This device does not work in
**                           the active speed mode
**                           ERR_MATH - Overflow during evaluation
**                           ERR_RANGE - Parameter out of range
** ===================================================================
*/

byte PWM8_SetDutyMS(word Time);
/*
** ===================================================================
**     Method      :  PWM8_SetDutyMS (bean PWM)
**
**     Description :
**         This method sets the new duty value of the output signal. The
**         duty is expressed in milliseconds as a 16-bit unsigned integer
**         number.
**     Parameters  :
**         NAME       - DESCRIPTION
**         Time       - Duty to set [in milliseconds]
**                      (0 to 20 ms in high speed mode)
**     Returns     :
**         ---        - Error code, possible codes:
**                           ERR_OK - OK
**                           ERR_SPEED - This device does not work in
**                           the active speed mode
**                           ERR_MATH - Overflow during evaluation
**                           ERR_RANGE - Parameter out of range
** ===================================================================
*/

void PWM8_Init(void);
/*
** ===================================================================
**     Method      :  PWM8_Init (bean PWM)
**
**     Description :
**         Initializes the associated peripheral(s) and the bean's 
**         internal variables. The method is called automatically as a 
**         part of the application initialization code.
**         This method is internal. It is used by Processor Expert only.
** ===================================================================
*/

#pragma CODE_SEG DEFAULT

/* END PWM8. */

#endif /* ifndef __PWM8 */
/*
** ###################################################################
**
**     This file was created by UNIS Processor Expert 2.96 [03.76]
**     for the Freescale HCS12 series of microcontrollers.
**
** ###################################################################
*/