/****************************************************************************
 * file name	: main.c
 * By 			: hugang, hgx2000@mail.china.com
****************************************************************************/

#include <stdio.h>
#include <stdarg.h>
#include <string.h>
#include "../inc/option.h"
#include "../inc/44b.h"
#include "../inc/44blib.h"
#include "../inc/def.h"

#include "../net/armnet.h"

volatile char which_int=0;
unsigned char default_mac[MACLEN] = {0x12,0x34,0x56,0x78,0x90,0xab};
NODE locnode;
unsigned int SERIAL_BAUD = 115200;
ETHERFRAME etherframe;

void __irq Eint1Isr(void)
{	
	unsigned short rxlen,ip_len;
	unsigned char net_isr;
	ARPKT *arp;
	ETHERFRAME *efp;
	IPKT *ip;
	efp = &etherframe;

	rI_ISPC = BIT_EINT1;
	
	NET_INTERRUPT_DISABLE;
	EN_CR = ENCR_PAGE0 + ENCR_NODMA + ENCR_STOP;
	net_isr = EN_ISR;
	
	if(net_isr & ENISR_RX)
	{
		DEBUGF(DEMO_DEBUG,("Rtl8019 Interrupted RX\n"));
		EN_ISR |= ENISR_RX;

		memset((unsigned char *)efp, 0, sizeof(ETHERFRAME));
		rxlen = GetEthernet(efp);
		SwapEther(efp);
		
		if(IsArp(efp, rxlen))
		{
			arp = (ARPKT *)(efp->edata);
			if(arp->op==ARPREQ && READ_PACKED(arp->dip)==locnode.ip)
			{
				DEBUGF(DEMO_DEBUG,("Get ARP REQUEST\n"));
				ArpRcvPacket(efp);
			}
		}
		else
		{
			ip_len = IsIp(efp, rxlen);
			if(ip_len)
			{
				ip = (IPKT *)(efp->edata);
				DEBUGF(DEMO_DEBUG,("Get IP\n"));
				if(IsIcmp(ip, ip_len))
				{
					DEBUGF(ICMP_DEBUG,("Get ICMP\n"));
					IcmpRcvPacket(efp);
				}
				else if(IsUdp(ip, ip_len))
				{
					DEBUGF(DEMO_DEBUG,("Get UDP\n"));
					UdpRcvPacket(efp);
				}
			}
		}
	}
	
	if(net_isr & ENISR_RX_ERR)
	{
		DEBUGF(DEMO_DEBUG,("Rtl8019 Interrupted RX_ERR\n"));
		EN_ISR |= ENISR_RX_ERR;
	}
	
	if(net_isr & ENISR_TX)
	{
		DEBUGF(DEMO_DEBUG,("Rtl8019 Interrupted TX\n"));
		EN_ISR |= ENISR_TX;
	}
	
	if(net_isr & ENISR_TX_ERR)
	{
		DEBUGF(DEMO_DEBUG,("Rtl8019 Interrupted TX_ERR\n"));
		EN_ISR |= ENISR_TX_ERR;
	}		
	
	EN_CR = ENCR_PAGE0 + ENCR_NODMA + ENCR_START;
	NET_INTERRUPT_ENABLE;
}
//***************************************************************************

/****************************************************************************
【功能說明】中斷初始化
****************************************************************************/
void Isr_Init(void)
{
    rINTCON = 0x1;		//中斷控制寄存器設置

    rINTMOD=0x0;	  // All=IRQ mode
 
    rINTMSK=~(BIT_GLOBAL);		//中斷有效
}

void IsrNetInit(void)
{
	pISR_EINT1 = (int)Eint1Isr;
	
	rPCONG = rPCONG | 0x000c;
	rPUPG = rPUPG & 0xfd;
	
	rEXTINT |= 0x0040;
	
	NET_INTERRUPT_ENABLE;
}
//***************************************************************************
void NodeInit(void)
{
	locnode.ip = IP4_ADDR(192,168,111,8);
	locnode.mask = IP4_ADDR(255,255,255,0);
	locnode.gate = IP4_ADDR(192,168,111,1);
	memcpy(locnode.mac,default_mac,6);
	locnode.port = 9000;
}

/****************************************************************************
【功能說明】系統主函數
****************************************************************************/
void Main(void)
{	

    rSYSCFG=SYSCFG_8KB;		//使用8K字節的指令緩存
	rNCACHBE0=((unsigned int)(Non_Cache_End>>12)<<16)|(Non_Cache_Start>>12); 
    //在上面的數據區域不使用高速緩存

	Port_Init();		//IO端口功能、方向設定
	Led_Disp();		//LED來回閃爍顯示 
	ChangePllValue(52,2,1);		//修改系統主頻為8倍頻
	Uart_Init(0,SERIAL_BAUD);		//異步串行口初始化，設置波特率為115200
	Uart_Printf("Net Test...");
	Delay(0);
	Isr_Init();		//中斷初始化
	NodeInit();
	ArpInit();	
	ResetNic();
	IsrNetInit();
	
	while(1);
}
//***************************************************************************