/*****  Naive RealTek 8139C driver for the DC Broadband Adapter. Some **  assistance on names of things from the NetBSD-DC sources.**  **  (c)2001 Dan Potter**  License: X11***/#ifndef _RTL_8139C_H#define _RTL_8139C_H/* RTL8139C register definitions */#define RT_IDR0			0x00		/* Mac address */#define RT_MAR0			0x08		/* Multicast filter */#define RT_TXSTATUS0		0x10	/* Transmit status (4 32bit regs) */#define RT_TXSTATUS1		0x14	/* Transmit status (4 32bit regs) */#define RT_TXSTATUS2		0x18	/* Transmit status (4 32bit regs) */#define RT_TXSTATUS3		0x1c	/* Transmit status (4 32bit regs) */#define RT_TXADDR0		0x20		/* Tx descriptors (also 4 32bit) */#define RT_TXADDR1		0x24		/* Tx descriptors (also 4 32bit) */#define RT_TXADDR2		0x28		/* Tx descriptors (also 4 32bit) */#define RT_TXADDR3		0x2c		/* Tx descriptors (also 4 32bit) */#define RT_RXBUF		0x30		/* Receive buffer start address */#define RT_RXEARLYCNT		0x34		/* Early Rx byte count */#define RT_RXEARLYSTATUS	0x36		/* Early Rx status */#define RT_CHIPCMD		0x37		/* Command register */#define RT_RXBUFTAIL		0x38		/* Current address of packet read (queue tail) */#define RT_RXBUFHEAD		0x3A		/* Current buffer address (queue head) */#define RT_INTRMASK		0x3C		/* Interrupt mask */#define RT_INTRSTATUS		0x3E		/* Interrupt status */#define RT_TXCONFIG		0x40		/* Tx config */#define RT_RXCONFIG		0x44		/* Rx config */#define RT_TIMER		0x48		/* A general purpose counter */#define RT_RXMISSED		0x4C		/* 24 bits valid, write clears */#define RT_CFG9346		0x50		/* 93C46 command register */#define RT_CONFIG0		0x51		/* Configuration reg 0 */#define RT_CONFIG1		0x52		/* Configuration reg 1 */#define RT_TIMERINT		0x54		/* Timer interrupt register (32 bits) */#define RT_MEDIASTATUS		0x58		/* Media status register */#define RT_CONFIG3		0x59		/* Config register 3 */#define RT_CONFIG4		0x5A		/* Config register 4 */#define RT_MULTIINTR		0x5C		/* Multiple interrupt select */#define RT_MII_TSAD		0x60		/* Transmit status of all descriptors (16 bits) */#define RT_MII_BMCR		0x62		/* Basic Mode Control Register (16 bits) */#define RT_MII_BMSR		0x64		/* Basic Mode Status Register (16 bits) */#define RT_AS_ADVERT		0x66		/* Auto-negotiation advertisement reg (16 bits) */#define RT_AS_LPAR		0x68		/* Auto-negotiation link partner reg (16 bits) */#define RT_AS_EXPANSION		0x6A		/* Auto-negotiation expansion reg (16 bits) *//* RTL8193C command bits; or these together and write teh resulting value   into CHIPCMD to execute it. */#define RT_CMD_RESET		0x10#define RT_CMD_RX_ENABLE	0x08#define RT_CMD_TX_ENABLE	0x04#define RT_CMD_RX_BUF_EMPTY	0x01/* RTL8139C interrupt status bits */#define RT_INT_PCIERR		0x8000		/* PCI Bus error */#define RT_INT_TIMEOUT		0x4000		/* Set when TCTR reaches TimerInt value */#define RT_INT_RXFIFO_OVERFLOW	0x0040		/* Rx FIFO overflow */#define RT_INT_RXFIFO_UNDERRUN	0x0020		/* Packet underrun / link change */#define RT_INT_RXBUF_OVERFLOW	0x0010		/* Rx BUFFER overflow */#define RT_INT_TX_ERR		0x0008#define RT_INT_TX_OK		0x0004#define RT_INT_RX_ERR		0x0002#define RT_INT_RX_OK		0x0001/* RTL8139C transmit status bits */#define RT_TX_CARRIER_LOST	0x80000000	/* Carrier sense lost */#define RT_TX_ABORTED		0x40000000	/* Transmission aborted */#define RT_TX_OUT_OF_WINDOW	0x20000000	/* Out of window collision */#define RT_TX_STATUS_OK		0x00008000	/* Status ok: a good packet was transmitted */#define RT_TX_UNDERRUN		0x00004000	/* Transmit FIFO underrun */#define RT_TX_HOST_OWNS		0x00002000	/* Set to 1 when DMA operation is completed */#define RT_TX_SIZE_MASK		0x00001fff	/* Descriptor size mask *//* RTL8139C receive status bits */#define RT_RX_MULTICAST		0x00008000	/* Multicast packet */#define RT_RX_PAM		0x00004000	/* Physical address matched */#define RT_RX_BROADCAST		0x00002000	/* Broadcast address matched */#define RT_RX_BAD_SYMBOL	0x00000020	/* Invalid symbol in 100TX packet */#define RT_RX_RUNT		0x00000010	/* Packet size is <64 bytes */#define RT_RX_TOO_LONG		0x00000008	/* Packet size is >4K bytes */#define RT_RX_CRC_ERR		0x00000004	/* CRC error */#define RT_RX_FRAME_ALIGN	0x00000002	/* Frame alignment error */#define RT_RX_STATUS_OK		0x00000001	/* Status ok: a good packet was received *//* Realtek PCI vendor ID */#define	RT_VENDORID				0x10EC/* Realtek Device ID */#define	RT_DEVICEID_8139			0x8139#endif