?? startup.s
字號:
;/****************************************Copyright (c)**************************************************
;** Guangzhou ZHIYUAN electronics Co.,LTD.
;** http://www.zyinside.com
;**
;**--------------File Info-------------------------------------------------------------------------------
;** File name: Startup.s
;** Last modified Date: 2006-02-22
;** Last Version: 1.0
;** Descriptions: The start up codes for LPC2200, including the initializing codes for the entry point of exceptions and the stacks of user tasks.
;** Every project should have a independent copy of this file for related modifications
;**------------------------------------------------------------------------------------------------------
;** Created by: Chenmingji
;** Created date: 2005-11-22
;** Version: 1.0
;** Descriptions: The original version
;**
;**------------------------------------------------------------------------------------------------------
;** Modified by: zhangbin
;** Modified date: 2006-6-28
;** Version: 1.1
;** Descriptions: Clear VICVectAddr Register In ResetInit.
;**
;**------------------------------------------------------------------------------------------------------
;** Modified by: zhangbin
;** Modified date: 2006-12-20
;** Version: 1.2
;** Descriptions: Modify PLL Config Method.
;**
;********************************************************************************************************/
RAM_SIZE EQU 0x2000
IRQ_STAXK_SIZE EQU (8 * 3) ;/* 允許3層嵌套 */
StackIRQ EQU (RAM_SIZE + 0X40000000)
StackUsr EQU (StackIRQ - IRQ_STAXK_SIZE * 4)
INCLUDE LPC2294.INC ; Include the head file 引入頭文件
NoInt EQU 0x80
NoFIQ EQU 0x40
UND32Mode EQU 0x1b
USR32Mode EQU 0x10
SVC32Mode EQU 0x13
SYS32Mode EQU 0x1f
IRQ32Mode EQU 0x12
FIQ32Mode EQU 0x11
TMode EQU 0x20
IMPORT __use_no_semihosting_swi
IMPORT Main
;The exported labels
;給外部使用的標號在這聲明
EXPORT Reset
CODE32
AREA vectors,CODE,READONLY
ENTRY
;interrupt vectors
;中斷向量表
Reset
B ResetInit
B ErrReset
B SoftwareInterrupt
B ErrReset
B ErrReset
DCD 0xa1b11fa4
B IRQ_Handler
SUB LR, LR, #4
; add FIQ ISR
LDMFD SP!, {PC}^
;********************************************************************************************************/
;
; you can use "B ResetInit"
;
;********************************************************************************************************/
ErrReset
B .
;********************************************************************************************************/
;軟中斷
SoftwareInterrupt
CMP R0, #3
LDRLO PC, [PC, R0, LSL #2]
MOVS PC, LR
;------------------------------------------------------------------------------------------------
SwiFunction
DCD IRQSave ;0
DCD FIQSave ;1
DCD FIQRestore ;2
;------------------------------------------------------------------------------------------------
FIQSave
MRS R0, SPSR
ORR R1, R0, #NoFIQ
MSR SPSR_c, R1
MOVS PC, LR
;------------------------------------------------------------------------------------------------
IRQSave
MRS R0, SPSR
ORR R1, R0, #NoInt
MSR SPSR_c, R1
MOVS PC, LR
;------------------------------------------------------------------------------------------------
FIQRestore
IRQRestore
MSR SPSR_c, R1
MOVS PC, LR
;********************************************************************************************************/
ResetInit
MSR CPSR_c, #(IRQ32Mode | NoInt | NoFIQ)
LDR SP, ResetInitData
MSR CPSR_c, #(SYS32Mode | NoInt | NoFIQ)
LDR SP, ResetInitData+4
IMPORT |Image$$RO$$Limit|
IMPORT |Image$$RW$$Base|
IMPORT |Image$$ZI$$Base|
IMPORT |Image$$ZI$$Limit|
LDR R0, ResetInitData+8
LDR R1, ResetInitData+12
LDR R3, ResetInitData+16
CMP R0, R1
BEQ LOOP1
LOOP0
CMP R1, R3
LDRCC R2, [R0], #4
STRCC R2, [R1], #4
BCC LOOP0
LOOP1
LDR R1, ResetInitData+20
MOV R2, #0
LOOP2
CMP R3, R1
STRCC R2, [R3], #4
BCC LOOP2
LDR R1, ResetInitData+24
BX R1
ResetInitData
DCD StackIRQ
DCD StackUsr
DCD |Image$$RO$$Limit|
DCD |Image$$RW$$Base|
DCD |Image$$ZI$$Base|
DCD |Image$$ZI$$Limit|
DCD Main|1
;********************************************************************************************************/
;IRQ中斷服務程序
IRQ_Handler
SUB LR, LR, #4 ; Calculate the returning address 計算返回地址
STMFD SP!, {R0-R3, R12, LR} ; Protects the task environments 保存任務環境
MRS R3, SPSR ; Protects the status variable 保存狀態
STMFD SP, {R3, LR}^ ; Protects SPSR and SP in user status, Notice: DO NOT write back.保存SPSR和用戶狀態的SP,注意不能回寫
; If the SP is written back, it should be adjusted to its appropriate value later.如果回寫的是用戶的SP，所以后面要調整SP
LDR R2, IRQ_HandlerData
SUB SP, SP, #4*2
MSR CPSR_c, #(NoInt | SYS32Mode) ; Switch to the System Mode 切換到系統模式
LDR R3, [R2]
ADD LR, PC, #1
BX R3
CODE16
BX PC
NOP
CODE32
MSR CPSR_c, #(NoInt | IRQ32Mode) ; Switch bak to IRQ mode 切換回irq模式
LDMFD SP, {R3, LR}^ ; Recover SPSR and SP in user status, Notic: DO NOT write back. 恢復SPSR和用戶狀態的SP,注意不能回寫
; If the SP is written back, it should be adjusted to its appropriate value later.如果回寫的是用戶的SP，所以后面要調整SP
MSR SPSR_cxsf, R3
ADD SP, SP, #4*2 ;
LDMFD SP!, {R0-R3, R12, PC}^ ;
IRQ_HandlerData
DCD VICVectAddr
;/*********************************************************************************************************
;** Function name: SetISR
;**
;** Descriptions: Set ISR function for VIC
;**
;** input parameters: Channel : VIC Channel
;** PRI : VIC PRI
;** Function : VIC ISR function
;** Returned value: None
;**
;** Created by: Chenmingji
;** Created Date: 2006/02/22
;**-------------------------------------------------------------------------------------------------------
;** Modified by:
;** Modified date:
;**------------------------------------------------------------------------------------------------------
;********************************************************************************************************/
CODE16
EXPORT SetISR
SetISR
CMP R1, #0x10
BCS SetISREnd
CMP R2, #0
BEQ SetISREnd
CMP R0, #0x20
BCS SetISREnd
PUSH {R0}
LSL R1, R1, #2
MOV R3, #0x20
ORR R0, R3
LDR R3, SetISRData
STR R0, [R3, R1]
MOV R0, #1
ORR R2, R0
SUB R3, #(VICVectCntl0 - VICVectAddr0 - 1)
SUB R3, #1
STR R2, [R3, R1]
SUB R3, #(VICVectAddr0 - VICIntEnable)
POP {R1}
LSL R0, R1
STR R0, [R3]
SetISREnd
BX LR
;/*********************************************************************************************************
;** Function name: TargetInit
;**
;** Descriptions: config VPBDIV, PLLCFG and MAMTIM
;**
;** input parameters: vpbdiv pllcfg and mamtim
;** Returned value: None
;**
;********************************************************************************************************/
EXPORT TargetInit
IMPORT IRQ_Exception
TargetInit
PUSH {R4, LR}
LDR R3, TargetInitData
MOV R4, #0x01
STR R4, [R3]
ADD R3, #(VPBDIV - MEMMAP)
STR R0, [R3]
ADD R3, #(PLLCON - VPBDIV)
CMP R1, #0xff
BHI TargetInit1
STR R1, [R3, #(PLLCFG - PLLCON)]
MOV R4, #1
STR R4, [R3]
MOV R4, #0xaa
STR R4, [R3, #(PLLFEED - PLLCON)]
MOV R4, #0x55
STR R4, [R3, #(PLLFEED - PLLCON)]
TargetInit1
SUB R3, #(PLLCON - MAMCR)
MOV R4, #0
STR R4, [R3]
STR R2, [R3, #(MAMTIM - MAMCR)]
MOV R4, #0x02
STR R4, [R3]
LDR R3, TargetInitData+4
LDR R4, TargetInitData+8
STR R4, [R3]
POP {R4, PC}
code32
SetISRData
DCD VICVectCntl0
TargetInitData
DCD MEMMAP
DCD VICDefVectAddr
DCD IRQ_Exception|1
;/*********************************************************************************************************
;** 以下為一些與系統相關的庫函數的實現
;** 具體作用請ads的參考編譯器與庫函數手冊
;** 用戶可以根據自己的要求修改
;********************************************************************************************************/
;/*********************************************************************************************************
;** The implementations for some library functions
;** For more details, please refer to the ADS compiler handbook and The library
;** function manual
;** User could change it as needed
;********************************************************************************************************/
CODE32
EXPORT __rt_div0
EXPORT fputc
EXPORT fgetc
EXPORT _sys_close
EXPORT _sys_write
EXPORT _sys_read
EXPORT _sys_istty
EXPORT _sys_seek
EXPORT _sys_ensure
EXPORT _sys_flen
EXPORT _sys_tmpnam
EXPORT _sys_command_string
__rt_div0
fputc
fgetc
_sys_close
_sys_write
_sys_read
_sys_istty
_sys_seek
_sys_ensure
_sys_flen
_sys_tmpnam
_sys_command_string
B .
CODE16
EXPORT _ttywrch
_ttywrch
B .
;/*********************************************************************************************************
;** unction name 函數名稱: CrpData
;** Descriptions 功能描述: encrypt the chip
;** input parameters 輸 入: None 無
;** Returned value 輸 出 : None 無
;** Used global variables 全局變量: None 無
;** Calling modules 調用模塊: None 無
;**
;** Created by 作 者: Chenmingji 陳明計
;** Created Date 日 期: 2004/03/27 2004年3月27日
;**-------------------------------------------------------------------------------------------------------
;** Modified by 修 改:
;** Modified date 日 期:
;**-------------------------------------------------------------------------------------------------------
;********************************************************************************************************/
IF :DEF: EN_CRP
IF . >= 0x1fc
INFO 1,"\nThe data at 0x000001fc must be 0x87654321.\nPlease delete some source before this line."
ENDIF
CrpData
WHILE . < 0x1fc
NOP
WEND
CrpData1
DCD 0x87654321 ;/*When the Data is 為0x87654321,user code be protected. 當此數為0x87654321時，用戶程序被保護 */
ENDIF
END
;/*********************************************************************************************************
;** End Of File
;********************************************************************************************************/
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -