# This file is provided as a template only. The values contained
# are only for example purposes. It is the responsibility of the
# the customer to determine the values for this design.

# target power file for ar5001a_mb23j card

# 11a Target Power table : 
#	 Rules:
#		1. up to a maximum of 8 test frequencies
#		2. test frequencies DO NOT need to cover the entire range of 4900-5850. It
#		   is allowed to provide data for a smaller range. for all channels
#		   outside of test frequencies range, target power will be assumed 0dB.
#		3. specify mask/PER limited target power for various rates
#
#BEGIN_11a_TARGET_POWER_TABLE  
#  test_frequencies   6-24_target  36_target 48_target   54_target 

   4900			20		  19		   16	      13.5  
   4940			20		  19		   16	      13.5  
   5020			20		  19		   17	      14.5  
   5120			20		  19		   17	      15.5  
   5250			20		  19		   18	      16.5  
   5360			20		  19		   18	      16.5  

#END_11a_TARGET_POWER_TABLE



# Test Groups :
#      Rules:
#		1. Specify up to 8 band edges for each test group.
#		2. If no backoff desired at a band edge, give a large number (e.g, 30) so
#		   that the driver determined limit becomes the target power.
#

#BEGIN_TEST_GROUPS

# Test Group 1: US and CANADA (FCC)
#	test_group_code	BE1	BE2	BE3	BE4	BE5	BE6	BE7	BE8
	0x10		5180	5240	5260	5320	5500	5700	5725	5850
			30	30	30	30	30	30	30	30  # Band Edge Max Power
			0	0	0	0	0	0	0	0   # in-band flag


# Test Group 2: JAPAN (MKK)
#	test_group_code	BE1	BE2	BE3	BE4	BE5	BE6	BE7	BE8
	0x40		5170	5230	
			30	30	  # Band Edge Max Power
			0	0	  # in-band flag


# Test Group 3: EUROPE (ETSI)
#	test_group_code	BE1	BE2	BE3	BE4	BE5	BE6	BE7	BE8
	0x30		5180	5240	5260	5320	5500	5700	5725	5825
			30	30	30	30	30	30	30	30  # Band Edge Max Power
			0	0	0	0	0	0	0	0   # in-band flag

#END_TEST_GROUPS