#$Id: //depot/sw/branches/ART_V48/bringup/ar5k/config/ar5001x2_cb22ag.eep#1 $

#EEPROM file for AR5001X+ 802.11a/b/g CardBus Reference Design

@cal_section_begin                  	# begin @cal section

TARGET_POWER_FILENAME      =  calTrgtPwr_ar5001x2_cb22ag.txt; # target power file for calibration
SUBSYSTEM_ID	           =  0x1026;   # Subsystem ID in hex
TURBO_DISABLE		   =  0;        # Prevents software from using TURBO modes
RF_SILENT		   =  0;        # Cards enabled with RFSilent can be easily silenced
DEVICE_TYPE		   =  1;        # 1=>Cardbus, 2=>PCI, 3=>miniPCI, 4=>AP
TURBO_MAXPOWER_5G	   =  16.0;     # Recommended max power in turbo mode to consume less than 2W.
TURBO_MAXPOWER_2p5G	   =  16.0;   	# Recommended max power in turbo mode at 2.5 GHz to consume less than 2W.
A_MODE		           =  1;        # Whether the adapter supports 802.11a functionality
B_MODE		           =  1;        # Whether the adapter supports 802.11b functionality
G_MODE		           =  1;        # Whether the adapter supports 802.11g functionality
ANTENNA_GAIN_5G	           =  2;	# Antenna gain at 5GHz. 8-bit signed val in 0.5dB steps.
ANTENNA_GAIN_2p5G          =  2;        # Antenna gain at 2.5GHz. 8-bit signed val in 0.5dB steps.
XLNA_GAIN		   =  13;       # xLNA gain in dB (per AS 6/14/02)
NOISE_FLOOR_THRESHOLD	   = -54;       # noise floor threshold value (per JHfmn 6/14/02)
11b_XLNA_GAIN		   =  13;       # xLNA gain in dB
11b_NOISE_FLOOR_THRESHOLD  = -1;   	# noise floor threshold value
11g_XLNA_GAIN		   =  13;       # xLNA gain in dB
11g_NOISE_FLOOR_THRESHOLD  = -1;   	# noise floor threshold value
11a_FALSE_DETECT_BACKOFF   =  7;	# in dB. only affects channels w/ clock harmonic overlap.
11b_FALSE_DETECT_BACKOFF   =  0;	# in dB. only affects channels w/ clock harmonic overlap.
11g_FALSE_DETECT_BACKOFF   =  0;	# in dB. only affects channels w/ clock harmonic overlap.
11g_TURBO_DISABLE          =  0;        # Set to 1 to disable TURBO mode in 11g
CCK_OFDM_DELTA		   = 1.5;	# in dB with 0.1dB resolution. In 11g, delta in output power for 1mbps and 6mbps
					# for any given pcdac.
CH14_FILTER_CCK_DELTA	   =  1.5;	# in dB with 0.1dB resolution. In 11g & 11b, delta in output power for ch14 and ch1 - ch13
					# for any given pcdac. This delta arises due to special filter requirement for ch14 (2484).

@cal_section_end                    	# end @cal section	


@config_section_begin               	# begin @config section

#Antenna Switch Table
#6 bit (msb:lsb) value are mapped to [atten5, atten2, antD, antC, antB, antA]	            	
#----------------------------------------------------------------------------------
@MODE: MODE_SPECIFIC             11a   11a_turbo        11b         11g   11g_turbo
#----------------------------------------------------------------------------------
bb_switch_table_r1x12           0x12        0x12        0x20       0x20      0x20 #(AntCtl 5)
bb_switch_table_r1x2            0x22        0x22        0x10       0x10      0x10 #(AntCtl 4)
bb_switch_table_r1x1            0x12        0x12        0x28       0x28      0x28 #(AntCtl 3)
bb_switch_table_r1              0x22        0x22        0x18       0x18      0x18 #(AntCtl 2)
bb_switch_table_t1              0x11        0x11        0x24       0x24      0x24 #(AntCtl 1)

bb_switch_table_r2x12           0x11        0x11        0x20       0x20      0x20 #(AntCtl 10)
bb_switch_table_r2x2            0x21        0x21        0x10       0x10      0x10 #(AntCtl 9)
bb_switch_table_r2x1            0x11        0x11        0x24       0x24      0x24 #(AntCtl 8)
bb_switch_table_r2              0x21        0x21        0x14       0x14      0x14 #(AntCtl 7)
bb_switch_table_t2              0x12        0x12        0x28       0x28      0x28 #(AntCtl 6)

bb_rxtx_margin_2ghz               11          11          16         16         16
bb_switch_settling              0x2d        0x5a        0x2d       0x2d      0x5a
bb_txrxatten                       7           7          15         15        15
bb_pga_desired_size              -80         -80         -80        -80       -80
bb_adc_desired_size              -32         -32         -38        -32       -32
rf_b_ob                            1           1           4          3         3
rf_b_db                            1           1           4          3         3
rf_ob                              1           1           2          2         2
rf_db                              2           2           2          2         2
rf_plo_sel                         1           1           1          1         2
rf_pwdxpd                          0           0           0          0         0
rf_xpd_gain	                 0xd	     0xd	 0xb	    0xb       0xb
bb_thresh62		          15	      15	  28	     28        28
bb_tx_end_to_xpab_off              0           0           0          0         0
bb_tx_end_to_xpaa_off              0           0           0          0         0
bb_tx_frame_to_xpab_on 	    	0x0e         0xe         0x7        0xe       0xe
bb_tx_frame_to_xpaa_on	    	0x0e         0xe         0x7        0xe       0xe
bb_tx_end_to_xlna_on               2           2           2          2         2

rf_gain_I                       0x0a        0x0a        0x0a       0x0a      0x0a

@config_section_end                 # end @config section