# target power file for AR5002AP 802.11a/b/g AP (non-concurrent) Reference Design

# 11a Target Power table : 
#	 Rules:
#		1. up to a maximum of 8 test frequencies
#		2. test frequencies DO NOT need to cover the entire range of 5180-5850. It
#		   is allowed to provide data for a smaller range. for all channels
#		   outside of test frequencies range, target power will be assumed 0dB.
#		3. specify mask/PER limited target power for various rates
#
#BEGIN_11a_TARGET_POWER_TABLE  
#  test_frequencies   6-24_target  36_target	48_target	54_target  
								    
   5170			20             20             18            17	  
   5320			20	       20             18            17	  
   5470			20	       20             18            17	  
   5720			20	       20             18            17	  
   5725			20	       19             18            16    
   5825			20	       19             18            16    
   5850			20	       19             18            16    
											         

#END_11a_TARGET_POWER_TABLE


# 11b Target Power table : 
#	 Rules:
#		1. Need to define exactly 2 test frequencies in 2.412 - 2.484 G range. 
#		2. test frequencies DO NOT need to cover the entire range of 2412-2484. It
#		   is allowed to provide data for a smaller range. for all channels
#		   outside of test frequencies range, target power will be assumed 0dB.
#		3. specify mask/PER limited target power for various rates
#
#BEGIN_11b_TARGET_POWER_TABLE  
#  test_frequencies   1L_target  5.5S_target 11L_target   11S_target  
							       
   2412			20	    20	     20	       20      
   2484			20	    20	     20	       20         

#END_11b_TARGET_POWER_TABLE

# ofdm@2p4 Target Power table : 
#	 Rules:
#		1. up to a maximum of 3 test frequencies in 2.412 - 2.484 G range
#		2. test frequencies DO NOT need to cover the entire range of 2412-2484. It
#		   is allowed to provide data for a smaller range. for all channels
#		   outside of test frequencies range, target power will be assumed 0dB.
#		3. specify mask/PER limited target power for various rates
#
#BEGIN_11g_TARGET_POWER_TABLE  
#  test_frequencies   6-24_target  36_target 48_target   54_target
								  
   2412			20	    20		18           17
   2447			20	    20		18           17
   2472			20	    20		18           17


#END_11g_TARGET_POWER_TABLE



# Test Groups :
#      Rules:
#		1. Specify up to 8 band edges for each test group.
#		2. If no backoff desired at a band edge, give a large number (e.g, 30) so
#		   that the driver determined limit becomes the target power.
#

#BEGIN_TEST_GROUPS

# Test Group 1: US and CANADA (FCC)
#	test_group_code	BE1	BE2	BE3	BE4	BE5	BE6	BE7
	0x10		5180	5240	5260	5320	5745	5765	5825
			17	17	20	17	20	20	20  # Band Edge Max Power
			0	0	0	0	0	1	0   # in-band flag

# Test Group 2: US and CANADA (FCC) 802.11a TURBO mode CTL
#	test_group_code	BE1	BE2	BE3	BE4	BE5	BE6     BE7     BE8     
	0x13		5200	5210	5250	5280	5290	5760    5765    5805    
			17	17	17	20	20	20      20      20      # Band Edge Max Power
			0	1	0	0	0	0       1       0       # in-band flag

# Test Group 3: US and CANADA (FCC) 802.11b mode CTL
#	test_group_code	BE1	BE2	BE3	
	0x11		2412	2417	2462		
			20	20	20	# Band Edge Max Power
			0	1	0	# in-band flag

# Test Group 4: US and CANADA (FCC) 802.11g mode CTL
#	test_group_code	BE1	BE2	BE3	BE4	
	0x12		2412	2417	2457	2462		
			16	20	20	16	# Band Edge Max Power
			0	1	1	0	# in-band flag

# Test Group 5: US and CANADA (FCC) 802.11g TURBO mode CTL
#	test_group_code	BE1	BE2	
	0x14		2437	2437		
			20	20	# Band Edge Max Power
			0	0	# in-band flag

# Test Group 6: JAPAN (MKK)
#	test_group_code	BE1	BE2	
	0x40		5170	5230	
			30	30	  # Band Edge Max Power
			0	0	  # in-band flag


# Test Group 7: EUROPE (ETSI)
#	test_group_code	BE1	BE2	BE3	BE4	BE5	BE6	BE7	
	0x30		5180	5320	5500	5700    5745    5765	5825	  
			18	18	20	20      30      30	30	# Band Edge Max Power
			0	0	0	0	0	1	0	# in-band flag

# Test Group 8: EUROPE (ETSI) 802.11b mode CTL
#	test_group_code	BE1	BE2	BE3	
	0x31		2412	2417	2472		
			14	14	14	# Band Edge Max Power
			0	1	0	# in-band flag

# Test Group 9: EUROPE (ETSI) 802.11g mode CTL
#	test_group_code	BE1	BE2	BE3	
	0x32		2412	2417	2472		
			13	13	13	# Band Edge Max Power
			0	1	0	# in-band flag

# Test Group 10: EUROPE (ETSI) 802.11g TURBO mode CTL 
#	test_group_code	BE1	BE2	
	0x34		2437	2437		
			14	14	# Band Edge Max Power
			0	0	# in-band flag

#END_TEST_GROUPS