//
// Copyright (c) Microsoft Corporation.  All rights reserved.
//
//
// Use of this source code is subject to the terms of the Microsoft end-user
// license agreement (EULA) under which you licensed this SOFTWARE PRODUCT.
// If you did not accept the terms of the EULA, you are not authorized to use
// this source code. For a copy of the EULA, please see the LICENSE.RTF on your
// install media.
//
//------------------------------------------------------------------------------
//
//  Header:  s3c2443_ioport.h
//
//  Defines the Input/Output Ports (IOPORT) control registers and associated
//  types and constants.
//
#ifndef __S3C2443_IOPORT_H
#define __S3C2443_IOPORT_H

#if __cplusplus
extern "C" {
#endif

//------------------------------------------------------------------------------
typedef struct {
	union {
		UINT32 GPACDL;                  // Port A - offset 0
		UINT32 GPACON;                  // Port A - offset 0
	};
	union {
		UINT32 GPACDH;                  // Data
		UINT32 GPADAT;                  // Data
	};
	
    UINT32 PAD1[2];

    UINT32 GPBCON;                  // Port B - offset 0x10
    UINT32 GPBDAT;                  // Data
    UINT32 GPBUDP;                   // Pull-up disable
    UINT32 PAD2;

    UINT32 GPCCON;                  // Port C - offset 0x20
    UINT32 GPCDAT;                  // Data
    UINT32 GPCUDP;                   // Pull-up disable
    UINT32 PAD3;
    
    UINT32 GPDCON;                  // Port D - offset 0x30
    UINT32 GPDDAT;                  // Data
    UINT32 GPDUDP;                   // Pull-up disable
    UINT32 PAD4;
    
    UINT32 GPECON;                  // Port E - offset 0x40
    UINT32 GPEDAT;                  // Data
    UINT32 GPEUDP;                   // Pull-up disable
    UINT32 PAD5;                 
    
    UINT32 GPFCON;                  // Port F - offset 0x50
    UINT32 GPFDAT;
    UINT32 GPFUDP; 
    UINT32 PAD6;
    
    UINT32 GPGCON;                  // Port G - offset 0x60
    UINT32 GPGDAT;
    UINT32 GPGUDP; 
    UINT32 PAD7;
    
    UINT32 GPHCON;                  // Port H - offset 0x70
    UINT32 GPHDAT;
    UINT32 GPHUDP; 
    UINT32 PAD8;

    UINT32 MISCCR;                  // misc control reg - offset 0x80
    UINT32 DCLKCON;                 // DCLK0/1 control reg
    
    UINT32 EXTINT0;                 // external interrupt control reg 0
    UINT32 EXTINT1;                 // external interrupt control reg 1
    UINT32 EXTINT2;                 // external interrupt control reg 2
    
    UINT32 EINTFLT0;                // reserved
    UINT32 EINTFLT1;                // reserved
    UINT32 EINTFLT2;                // external interrupt filter reg 2
    UINT32 EINTFLT3;                // external interrupt filter reg 3

    UINT32 EINTMASK;                // external interrupt mask reg
    UINT32 EINTPEND;                // external interrupt pending reg

    UINT32 GSTATUS0;                // external pin status
    UINT32 GSTATUS1;                // chip ID
    UINT32 GSTATUS2;                // reset status
    UINT32 GSTATUS3;                // inform register
    UINT32 GSTATUS4;                // inform register

	UINT32 DSC0;					// C0 - added by simon
	UINT32 DSC1;
	UINT32 DSC2;
	UINT32 MSLCON;

	UINT32 GPJCON;					// D0
	UINT32 GPJDAT;
	UINT32 GPJUDP;
	UINT32 PDA9;

	UINT32 GPKCON;					// E0
	UINT32 GPKDAT;
	
	union {
	UINT32 DATAPDEN;
	UINT32 GPKUDP;
	};
	
	UINT32 PDA10;
    
	UINT32 GPLCON;					// F0
	UINT32 GPLDAT;
	UINT32 GPLUDP;
	UINT32 PDA11;

	UINT32 GPMCON;					// 100
	UINT32 GPMDAT;
	UINT32 GPMUDP;
	UINT32 PDA12;
} S3C2443_IOPORT_REG, *PS3C2443_IOPORT_REG;  

//------------------------------------------------------------------------------

#if __cplusplus
}
#endif

#endif // __S3C2443_IOPORT_H