/****************************************Copyright (c)**************************************************
**                               Guangzou ZLG-MCU Development Co.,LTD.
**                                      graduate school
**                                 http://www.zlgmcu.com
**
**--------------File Info-------------------------------------------------------------------------------
** File Name: config.h
** Last modified Date:  2004-09-17
** Last Version: 1.0
** Descriptions: User Configurable File
**
**------------------------------------------------------------------------------------------------------
** Created By: Chenmingji
** Created date:   2004-09-17
** Version: 1.0
** Descriptions: First version
**
**------------------------------------------------------------------------------------------------------
** Modified by:
** Modified date:
** Version:
** Descriptions:
**
********************************************************************************************************/
#ifndef __CONFIG_H 
#define __CONFIG_H
//這一段無需改動
//This segment should not be modified
#ifndef TRUE
#define TRUE  1
#endif

#ifndef FALSE
#define FALSE 0
#endif

typedef unsigned char  uint8;                   /* defined for unsigned 8-bits integer variable 	無符號8位整型變量  */
typedef signed   char  int8;                    /* defined for signed 8-bits integer variable		有符號8位整型變量  */
typedef unsigned short uint16;                  /* defined for unsigned 16-bits integer variable 	無符號16位整型變量 */
typedef signed   short int16;                   /* defined for signed 16-bits integer variable 		有符號16位整型變量 */
typedef unsigned int   uint32;                  /* defined for unsigned 32-bits integer variable 	無符號32位整型變量 */
typedef signed   int   int32;                   /* defined for signed 32-bits integer variable 		有符號32位整型變量 */
typedef float          fp32;                    /* single precision floating point variable (32bits) 單精度浮點數（32位長度） */
typedef double         fp64;                    /* double precision floating point variable (64bits) 雙精度浮點數（64位長度） */

/********************************/
/*      uC/OS-II specital code  */
/*      uC/OS-II的特殊代碼      */
/********************************/

#define     USER_USING_MODE    0x10                    /*  User mode ,ARM 32BITS CODE 用戶模式,ARM代碼                  */
// 
                                                     /*  Chosen one from 0x10,0x30,0x1f,0x3f.只能是0x10,0x30,0x1f,0x3f之一       */
#include "Includes.h"


/********************************/
/*      ARM的特殊代碼           */
/*      ARM specital code       */
/********************************/
//這一段無需改動
//This segment should not be modify

//#include    "LPC2294.h"
#include    "LPC213X.h"

/********************************/
/*     應用程序配置             */
/*Application Program Configurations*/
/********************************/
//以下根據需要改動
//This segment could be modified as needed.
#include    <stdio.h>
#include    <ctype.h>
#include    <stdlib.h>
#include    <setjmp.h>
#include    <rt_misc.h>


/********************************/
/*     本例子的配置             */
/*Configuration of the example */
/********************************/
/* System configuration .Fosc、Fcclk、Fcco、Fpclk must be defined */
/* 系統設置, Fosc、Fcclk、Fcco、Fpclk必須定義*/
#define Fosc            11059200                    //Crystal frequence,10MHz~25MHz，should be the same as actual status. 
						    //應當與實際一至晶振頻率,10MHz~25MHz，應當與實際一至
#define Fcclk           (Fosc * 4)                  //System frequence,should be (1~32)multiples of Fosc,and should be equal or less  than 60MHz. 
						    //系統頻率，必須為Fosc的整數倍(1~32)，且<=60MHZ
#define Fcco            (Fcclk * 4)                 //CCO frequence,should be 2、4、8、16 multiples of Fcclk, ranged from 156MHz to 320MHz. 
						    //CCO頻率，必須為Fcclk的2、4、8、16倍，范圍為156MHz~320MHz
#define Fpclk           (Fcclk / 4) * 1             //VPB clock frequence , must be 1、2、4 multiples of (Fcclk / 4).
						    //VPB時鐘頻率，只能為(Fcclk / 4)的1、2、4倍

#include    "target.h"              //This line may not be deleted 這一句不能刪除


//#include	"crc.h"
//#define 	UART0_SEND_QUEUE_LENGTH   60    /* 給UART0發送數據隊列分配的空間大小 */

//#define 	QUEUE_DATA_TYPE           uint8
//#include 	"queue.h"
//#define 	EN_QUEUE_WRITE         	1    	/* 禁止(0)或允許(1)FIFO發送數據      */
//#define 	EN_QUEUE_WRITE_FRONT 	0     	/* 禁止(0)或允許(1)LIFO發送數據      */
//#define 	EN_QUEUE_NDATA         	1     	/* 禁止(0)或允許(1)取得隊列數據數目   */
//#define 	EN_QUEUE_SIZE           1     	/* 禁止(0)或允許(1)取得隊列數據總容量 */
//#define 	EN_QUEUE_FLUSH        	0     	/* 禁止(0)或允許(1)清空隊列           */

//#include "I2C.H"
//#define  CAT1025   0XA0
/*******
#ifdef __RELEASE
#include "lpc213x_iap.h"
#endif
*******/
#include	"uart.h"


/********************************************************************
#include "spi.h"
#define HC595_CS    1<<24
#define SPI_MOD    SPI_CPHA_ONE|SPI_CPOL_HIGH|SPI_LSBF_BIT7
extern  uint32 GetOSPrioCur(void);
*******************************************************************/
#endif
/*********************************************************************************************************
**                            End Of File
********************************************************************************************************/