The Blinky project is a simple program for the LPC2378
using Keil 'MCB2300' Evaluation Board and demonstrating 
interrupt functionality.

Example functionality:                                                   
 - Clock Settings:
   - XTAL             = 12   MHz
   - PLL              = 288  MHz
   - processor clock  = 48   MHz
   - USB clock        = 48   MHz
   - peripheral clock = 12   MHz
 - UART1 settings
   (baudrate = 9600, 8 data bits, 1 stop bits, no parity)
 - Timer0 timer is activating clock_1s every 1 second, 
   starting AD conversion (every 1 ms) and displaying 
   bargraph on 8 LEDs, it works in interrupt mode
 - AD conversion is done in interrupt mode
 - AD value is sent every 1 second on UART1
 - text is displayed to textual LCD
 - bargraph is displayed to textual LCD, according to 
   potentiometer position
 - 8 LEDs state represent the potentiometer position
 
The Blinky program is available in different targets:
  Simulator:       configured for software Simulator
  MCB2300 Flash:   runs from Internal Flash located on chip
                   (used for production or target debugging)