/* * (C) Copyright 2001 * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA *//* * board/config.h - configuration options, board specific */#ifndef __CONFIG_H#define __CONFIG_H#define CFG_GT_6426x        GT_64260 /* with a 64260 system controller */#define CONFIG_ETHER_PORT_MII	/* use two MII ports */#define CONFIG_INTEL_LXT97X	/* Intel LXT97X phy */#ifndef __ASSEMBLY__#include <galileo/core.h>#endif#include "../board/evb64260/local.h"#define CONFIG_EVB64260		1	/* this is an EVB64260 board	*/#define CONFIG_ZUMA_V2		1	/* always define this for ZUMA v2 *//* #define CONFIG_ZUMA_V2_OLD	1 */	/* backwards compat for old V2 board */#define CONFIG_BAUDRATE		38400	/* console baudrate = 38400	*/#define CONFIG_ECC			/* enable ECC support */#define CONFIG_750CX			/* we have a 750CX/CXe (override local.h) *//* which initialization functions to call for this board */#define CONFIG_MISC_INIT_R#define CONFIG_BOARD_EARLY_INIT_F#define CFG_BOARD_ASM_INIT#define CFG_BOARD_NAME		"Zuma APv2"#define CFG_HUSH_PARSER#define CFG_PROMPT_HUSH_PS2	"> "/* * The following defines let you select what serial you want to use * for your console driver. * * what to do: * to use the DUART, undef CONFIG_MPSC.	 If you have hacked a serial * cable onto the second DUART channel, change the CFG_DUART port from 1 * to 0 below. * * to use the MPSC, #define CONFIG_MPSC.  If you have wired up another * mpsc channel, change CONFIG_MPSC_PORT to the desired value. */#define CONFIG_MPSC#define CONFIG_MPSC_PORT	0#define CONFIG_NET_MULTI        /* attempt all available adapters *//* define this if you want to enable GT MAC filtering */#define CONFIG_GT_USE_MAC_HASH_TABLE#if 1#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/#else#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/#endif#define CONFIG_ZERO_BOOTDELAY_CHECK#undef	CONFIG_BOOTARGS#define CONFIG_BOOTCOMMAND							\	"tftpboot && "								\	"setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath " \	"ip=$ipaddr:$serverip:$gatewayip:"				\	"$netmask:$hostname:eth0:none panic=5 && bootm"#define CONFIG_LOADS_ECHO	0	/* echo off for serial download */#define CFG_LOADS_BAUD_CHANGE		/* allow baudrate changes	*/#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/#undef	CONFIG_ALTIVEC			/* undef to disable		*//* * BOOTP options */#define CONFIG_BOOTP_SUBNETMASK#define CONFIG_BOOTP_GATEWAY#define CONFIG_BOOTP_HOSTNAME#define CONFIG_BOOTP_BOOTPATH#define CONFIG_BOOTP_BOOTFILESIZE#define CONFIG_MII		/* enable MII commands *//* * Command line configuration. */#include <config_cmd_default.h>#define CONFIG_CMD_ASKENV#define CONFIG_CMD_BSP#define CONFIG_CMD_JFFS2#define CONFIG_CMD_MII#define CONFIG_CMD_DATE/* * JFFS2 partitions * *//* No command line, one static partition, whole device */#undef CONFIG_JFFS2_CMDLINE#define CONFIG_JFFS2_DEV		"nor0"#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF#define CONFIG_JFFS2_PART_OFFSET	0x00000000/* mtdparts command line support *//* Note: fake mtd_id used, no linux mtd map file *//*#define CONFIG_JFFS2_CMDLINE#define MTDIDS_DEFAULT		"nor1=zuma-1,nor2=zuma-2"#define MTDPARTS_DEFAULT	"mtdparts=zuma-1:-(jffs2),zuma-2:-(user)"*//* * Miscellaneous configurable options */#define CFG_LONGHELP			/* undef to save memory		*/#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/#if defined(CONFIG_CMD_KGDB)#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/#else#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/#endif#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */#define CFG_MAXARGS	16		/* max number of command args	*/#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/#define CFG_MEMTEST_START	0x00400000	/* memtest works on	*/#define CFG_MEMTEST_END		0x00C00000	/* 4 ... 12 MB in DRAM	*/#define CFG_LOAD_ADDR		0x00300000	/* default load address */#define CFG_HZ			1000		/* decr freq: 1ms ticks */#define CFG_BUS_HZ		133000000	/* 133 MHz		*/#define CFG_BUS_CLK		CFG_BUS_HZ#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }/* * Low Level Configuration Settings * (address mappings, register initial values, etc.) * You should know what you are doing if you make changes here. *//*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area */#define CFG_INIT_RAM_ADDR	0x40000000#define CFG_INIT_RAM_END	0x1000#define CFG_GBL_DATA_SIZE	128  /* size in bytes reserved for init data */#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)#define CFG_INIT_RAM_LOCK/*----------------------------------------------------------------------- * Start addresses for the final memory configuration * (Set up by the startup code) * Please note that CFG_SDRAM_BASE _must_ start at 0 */#define CFG_SDRAM_BASE		0x00000000#define CFG_FLASH_BASE		0xfff00000#define CFG_RESET_ADDRESS	0xfff00100#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */#define CFG_MONITOR_BASE	CFG_FLASH_BASE#define CFG_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc *//* areas to map different things with the GT in physical space */#define CFG_DRAM_BANKS		4#define CFG_DFL_GT_REGS		0x14000000	/* boot time GT_REGS *//* What to put in the bats. */#define CFG_MISC_REGION_BASE	0xf0000000/* Peripheral Device section */#define CFG_GT_REGS		0xf8000000	/* later mapped GT_REGS */#define CFG_DEV_BASE		0xf0000000#define CFG_DEV0_SIZE		_64M /* zuma flash @ 0xf000.0000*/#define CFG_DEV1_SIZE		 _8M /* zuma IDE   @ 0xf400.0000 */#define CFG_DEV2_SIZE		 _8M /* unused */#define CFG_DEV3_SIZE		 _8M /* unused */#define CFG_DEV0_PAR		0xc498243c	/*     c    4     9     8     2	    4     3     c */	/* 33 22|2222|22 22|111 1|11 11|1 1  |	   |      */	/* 10 98|7654|32 10|987 6|54 32|1 098|7 654|3 210 */	/* 11|00|0100|10 01|100|0 00|10 0|100 0|011 1|100 */	/*  3| 0|.... ..| 1| 4 |  0 |  4 |   8 |   7 | 4  */#define CFG_DEV1_PAR		0xc01b6ac5	/*     c    0     1     b     6	    a     c     5 */	/* 33 22|2222|22 22|111 1|11 11|1 1  |	   |      */	/* 10 98|7654|32 10|987 6|54 32|1 098|7 654|3 210 */	/* 11|00|0000|00 01|101|1 01|10 1|010 1|100 0|101 */	/*  3| 0|.... ..| 1| 5 |  5 |  5 |   5 |   8 | 5  */#define CFG_8BIT_BOOT_PAR	0xc00b5e7c#define CFG_MPP_CONTROL_0	0x00007777 /* GPP[7:4] : REQ0[1:0] GNT0[1:0] */#define CFG_MPP_CONTROL_1	0x00000000 /* GPP[15:12] : GPP[11:8] */#define CFG_MPP_CONTROL_2	0x00008888 /* GPP[23:20] : REQ1[1:0] GNT1[1:0] */#define CFG_MPP_CONTROL_3	0x00000000 /* GPP[31:28] (int[3:0]) */					   /* GPP[27:24] (27 is int4, rest are GPP) */#define CFG_SERIAL_PORT_MUX	0x00001101 /* 11=MPSC1/MPSC0 01=ETH,  0=only MII */#define CFG_GPP_LEVEL_CONTROL	0xf8000000 /* interrupt inputs: GPP[31:27] */#define CFG_SDRAM_CONFIG	0xe4e18200	/* 0x448 */				/* idmas use buffer 1,1				   comm use buffer 1				   pci use buffer 0,0 (pci1->0 pci0->0)				   cpu use buffer 1 (R*18)				   normal load (see also ifdef HVL)				   standard SDRAM (see also ifdef REG)				   non staggered refresh */				/* 31:26  25 23	 20 19 18 16 */				/* 111001 00 111 0  0  00 1 */				/* refresh count=0x200				   phy interleave disable (by default,				   set later by dram config..)				   virt interleave enable */				/* 15 14 13:0 */				/* 1  0	 0x200 */#define CFG_DEV0_SPACE		CFG_DEV_BASE#define CFG_DEV1_SPACE		(CFG_DEV0_SPACE + CFG_DEV0_SIZE)#define CFG_DEV2_SPACE		(CFG_DEV1_SPACE + CFG_DEV1_SIZE)#define CFG_DEV3_SPACE		(CFG_DEV2_SPACE + CFG_DEV2_SIZE)/*----------------------------------------------------------------------- * PCI stuff */#define PCI_HOST_ADAPTER	0	/* configure ar pci adapter	*/#define PCI_HOST_FORCE		1	/* configure as pci host	*/#define PCI_HOST_AUTO		2	/* detected via arbiter enable	*/#define CONFIG_PCI			/* include pci support		*/#define CONFIG_PCI_HOST PCI_HOST_FORCE	/* select pci host function	*/#define CONFIG_PCI_PNP			/* do pci plug-and-play		*//* PCI MEMORY MAP section */#define CFG_PCI0_MEM_BASE	0x80000000#define CFG_PCI0_MEM_SIZE	_128M#define CFG_PCI1_MEM_BASE	0x88000000#define CFG_PCI1_MEM_SIZE	_128M#define CFG_PCI0_0_MEM_SPACE	(CFG_PCI0_MEM_BASE)#define CFG_PCI1_0_MEM_SPACE	(CFG_PCI1_MEM_BASE)/* PCI I/O MAP section */#define CFG_PCI0_IO_BASE	0xfa000000#define CFG_PCI0_IO_SIZE	_16M#define CFG_PCI1_IO_BASE	0xfb000000#define CFG_PCI1_IO_SIZE	_16M#define CFG_PCI0_IO_SPACE	(CFG_PCI0_IO_BASE)#define CFG_PCI0_IO_SPACE_PCI	0x00000000#define CFG_PCI1_IO_SPACE	(CFG_PCI1_IO_BASE)#define CFG_PCI1_IO_SPACE_PCI	0x00000000/*---------------------------------------------------------------------- * Initial BAT mappings *//* NOTES: * 1) GUARDED and WRITE_THRU not allowed in IBATS * 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT *//* SDRAM */#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)#define CFG_DBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)#define CFG_DBAT0U CFG_IBAT0U/* init ram */#define CFG_IBAT1L  (CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)#define CFG_IBAT1U  (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)#define CFG_DBAT1L  CFG_IBAT1L#define CFG_DBAT1U  CFG_IBAT1U/* PCI0, PCI1 memory space (starting at PCI0 base, mapped in one BAT) */#define CFG_IBAT2L BATL_NO_ACCESS#define CFG_IBAT2U CFG_DBAT2U#define CFG_DBAT2L (CFG_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)#define CFG_DBAT2U (CFG_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)/* GT regs, bootrom, all the devices, PCI I/O */#define CFG_IBAT3L (CFG_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW)#define CFG_IBAT3U (CFG_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M)#define CFG_DBAT3L (CFG_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)#define CFG_DBAT3U CFG_IBAT3U/* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */#define CFG_BOOTMAPSZ		(8<<20) /* Initial Memory map for Linux *//*----------------------------------------------------------------------- * FLASH organization */#define CFG_MAX_FLASH_BANKS	3	/* max number of memory banks	*/#define CFG_MAX_FLASH_SECT	130	/* max number of sectors on one chip */#define CFG_EXTRA_FLASH_DEVICE	DEVICE0 /* extra flash at device 0 */#define CFG_EXTRA_FLASH_WIDTH	2	/* 16 bit */#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */#define CFG_FLASH_CFI		1#define CFG_ENV_IS_IN_FLASH	1#define CFG_ENV_SIZE		0x1000	/* Total Size of Environment Sector */#define CFG_ENV_SECT_SIZE	0x10000 /* see README - env sect real size */#define CFG_ENV_ADDR		(0xfff80000 - CFG_ENV_SECT_SIZE)/*----------------------------------------------------------------------- * Cache Configuration */#define CFG_CACHELINE_SIZE	32	/* For all MPC74xx CPUs		 */#if defined(CONFIG_CMD_KGDB)#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */#endif/*----------------------------------------------------------------------- * L2CR setup -- make sure this is right for your board! * look in include/74xx_7xx.h for the defines used here */#define CFG_L2#ifdef CONFIG_750CX#define L2_INIT		0#else#define L2_INIT		(L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \			L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)#endif#define L2_ENABLE	(L2_INIT | L2CR_L2E)/*------------------------------------------------------------------------ * Real time clock */#define CONFIG_RTC_DS1302/*------------------------------------------------------------------------ * Galileo I2C driver */#define CONFIG_GT_I2C/* * Internal Definitions * * Boot Flags */#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */#define BOOTFLAG_WARM	0x02		/* Software reboot		    */#endif	/* __CONFIG_H */