?? pb_if.h
字號:
/*****************************************************************************/
/* */
/* SOFTING AG */
/* Richard-Reitzner-Allee 6 */
/* D-85540 Haar */
/* Phone: (++49)-(0)89-45656-0 */
/* Fax: (++49)-(0)89-45656-399 */
/* */
/* Copyright (C) SOFTING AG 1995-2007 */
/* All Rights Reserved */
/* */
/*****************************************************************************/
/*****************************************************************************/
/* PROFIBUS APPLICATION PROGRAM INTERFACE */
/* */
/* Filename : PB_IF.H */
/* Version : 5.43.0.00.release */
/* Date : 30-October-2007 */
/* Author : SOFTING AG */
/* */
/* Description : This file contains the extern function declarations, */
/* defines and types of the PROFIBUS Communication Interface */
/* */
/*****************************************************************************/
#ifndef __PB_IF__
#define __PB_IF__
#pragma warning (disable : 4103) /* used #pragma pack to change alignment */
#ifdef WIN32
#pragma pack(push,2)
#else
#pragma pack(2)
#endif
#pragma warning (default : 4103)
/**********************************************************************************/
/* INTERFACE DEFINES */
/**********************************************************************************/
/* contants for DeviceTypes -(only used for WinNT/Win2K-Interface) -------------- */
/* --- DP Devices --------------------------------------------------------------- */
#define DEVICE_DP_MANAGEMENT 1
#define DEVICE_DP_SERVICE 2
#define DEVICE_DP_SLAVE_DATA 3
#define DEVICE_DP_MSAC 9
/* --- FDL Devices -------------------------------------------------------------- */
#define DEVICE_FDL_MANAGEMENT 4
#define DEVICE_FDL_SAP 5
/* --- FMS Devices -------------------------------------------------------------- */
#define DEVICE_FMS_MANAGEMENT 6
#define DEVICE_FMS_CR 7
/* --- Basic Management Device -------------------------------------------------- */
#define DEVICE_BASIC_MANAGEMENT 8
/* --- contants for IRQ values -------------------------------- */
#define REQ_IRQ 0xF0 /* IND/CON IRQ is received */
#define ACK_IRQ 0x0F /* acknowledge REQ/RES */
#define DP_SLAVE_IO_REQ_IRQ 0xE0 /* MASTER: DP-SLAVE-IO IND/REQ */
#define DP_SLAVE_IO_ACK_IRQ 0x0E /* MASTER: DP-SLAVE-IO acknowldege IND/REQ */
#define DP_DATA_STOP_REQ_IRQ 0xD0 /* MASTER: data transfer stop REQ received */
#define DP_DATA_STOP_ACK_IRQ 0x0D /* MASTER: data transfer stop Acknowldege */
#define TRC_REQ_IRQ 0xC0 /* TRACE REQ is received */
#define TRC_ACK_IRQ 0x0C /* TRACE acknowledge */
#define EXCEPTION_REQ_IRQ 0xB0 /* Exception Request */
#define EXCEPTION_ACK_IRQ 0x0B /* Exception Acknowledge */
#define DPS_SLAVE_INP_REQ_IRQ 0xA0 /* SLAVE: DP-SLAVE-INPUT request */
#define DPS_SLAVE_INP_ACK_IRQ 0x0A /* SLAVE: DP-SLAVE-INPUT Acknowldege */
#define DPS_SLAVE_OUTP_REQ_IRQ 0x90 /* SLAVE: DP-SLAVE-OUTPUT request */
#define DPS_SLAVE_OUTP_ACK_IRQ 0x09 /* SLAVE: DP-SLAVE-OUTPUT Acknowldege */
/* --- contants to receive an indication or confirmation ------------------------ */
#define CON_IND_RECEIVED 0x0001 /* ind. or con. has been received */
#define NO_CON_IND_RECEIVED 0x0000 /* nothing has been received */
/* --- values > CON_IND_RECEIVED are error returns (see pb_err.h) -------------- */
/* --- OK return value ---------------------------------------------------------- */
#define E_OK 0 /* no errors */
/* --- values != E_OK are error returns (see pb_err.h) -------------------------- */
/* --- service result ----------------------------------------------------------- */
#define NEG 0x01 /* result for negative response */
#define POS 0x00 /* result for positive response */
/* --- service priority --------------------------------------------------------- */
#define LOW 0x00 /* high priority */
#define HIGH 0x01 /* low priority */
/* --- service primitives ------------------------------------------------------- */
#define REQ 0x00 /* request primitive */
#define CON 0x01 /* confirmation primitive */
#define IND 0x02 /* indication primitive */
#define RES 0x03 /* response primitive */
#define RET 0x04 /* return primitive not used by application */
/* --- layer identifiers -------------------------------------------------------- */
#define USR 0x00 /* identifier USER */
#define FMS 0x01 /* identifier FMS */
#define LLI 0x02 /* identifier LLI */
#define FDL 0x03 /* identifier FDL */
#define FM7 0x04 /* identifier FM7 */
#define FMB 0x05 /* identifier FMB */
#define FMS_USR 0x06 /* identifier FMS-USER */
#define FM7_USR 0x07 /* identifier FM7-USER */
#define FMB_USR 0x08 /* identifier FMB-USER */
#define DPS 0x09 /* identifier DPS */
#define DPS_USR 0x0A /* identifier DPS-USER */
#define DP 0x0B /* identifier DP */
#define DP_USR 0x0C /* identifier DP-USER */
#define FDLIF 0x0D /* identifier FDLIF */
#define FDLIF_USR 0x0E /* identifier FDLIF-USER */
#define PAPI 0xF0 /* identifier Application-Layer-IF */
#if (PB_VER < 500)
#define FMA7 FM7 /* identifier FMA7 */
#define FMA2 FMB /* identifier FMA2 */
#define FMA7_USR FM7_USR /* identifier FMA7-USER */
#endif
/* --- identifiers for data description interface ------------------------------- */
/* --- 0x00 - 0x3F used by FMS -- (no identifiers defined) ---------------------- */
/* --- 0x40 - 0x7F reserved by management -- (no identifiers defined) ----------- */
/* --- 0x80 - 0x9F reserved by DP ----------------------------------------------- */
/* --- DP-MASTER ---------------------------------------------------------------- */
#define ID_DP_SLAVE_IO_IMAGE 0x80 /* MASTER: image for slave io datas */
#define ID_DP_STATUS_IMAGE 0x81 /* MASTER: image for status datas */
#define ID_DP_SLAVE_IO_CONFIG_IMAGE 0x82 /* MASTER: DPRAM layout of slave io */
/* --- DP-SLAVE ----------------------------------------------------------------- */
#define ID_DPS_SLAVE_INPUT_IMAGE 0x90 /* SLAVE: image for slave input datas */
#define ID_DPS_SLAVE_OUTPUT_IMAGE 0x91 /* SLAVE: image for slave output datas */
/* --- 0x92 /* reserved for internal use */
/* --- 0xA0 - 0xEF reserved for future use --- (no identifiers defined) --------- */
/* --- 0xF0 - 0xFF reserved for diagonsis -------------------------------------- */
#define ID_EXCEPTION_IMAGE 0xF0 /* image for exeption datas */
#define ID_FW_VERS_IMAGE 0xF1 /* image for firmware version */
#define ID_SERIAL_DEVICE_NUMBER 0xF2 /* image for serial device number */
#define ID_TRACE_IMAGE 0xF3 /* image for TRACE datas */
/* --- idebtifier for end of data description list ------------------------------ */
#define EOF_DATA_DESCR_LIST 0x00 /* end of data description list */
/**********************************************************************************/
/* PROFI SERVICE DESCRIPTION BLOCK */
/**********************************************************************************/
typedef struct _T_PROFI_SERVICE_DESCR
{
USIGN16 comm_ref; /* communication reference */
USIGN8 layer; /* layer identifier */
USIGN8 service; /* service identifier */
USIGN8 primitive; /* service primitive */
INT8 invoke_id; /* invoke id */
INT16 result; /* service result (POS or NEG) */
} T_PROFI_SERVICE_DESCR;
#ifdef WIN16
/**********************************************************************************/
/* PROFI INITIALIZATION DATA STRUCTURE */
/**********************************************************************************/
typedef struct _T_PROFI_INIT
{
USIGN32 dpr_address; /* DPR address */
INT16 io_port_address; /* IO port address */
PB_BOOL load_firmware; /* PB_TRUE for PROFI-IF
PB_FALSE for PROFIboard,PROFIcard and PROFI104 */
USIGN8 time_out; /* time out interval in seconds */
CSTRING *loader_file; /* loader file (PROFI-IF only) */
CSTRING *firmware_file; /* firmware file (PROFI-IF only */
USIGN8 host_type; /* for internal use */
USIGN8 irq_vector; /* IRQ line to host */
USIGN8 dpr_access_mode; /* DPR access mode (8/16 Bit ...) */
USIGN8 address_mode; /* host address mode */
USIGN8 poll_int_mode; /* host POLL / IRQ mode */
USIGN8 cntrl_type; /* for internal use */
USIGN8 token_drive; /* indicates the token drive (only PROFI-IF)*/
USIGN8 reserved_1; /* reserved */
USIGN16 reserved_2; /* reserved */
USIGN16 reserved_3; /* reserved */
} T_PROFI_INIT;
/* --- macro to set T_PROFI_INIT data structure with default values ------------ */
#define _SET_PROFI_INIT_DEF_PARAM(init_param,a,b) \
init_param.dpr_address = a; \
init_param.load_firmware = PB_FALSE; \
init_param.io_port_address = b; \
init_param.irq_vector = (USIGN8) 0x00; \
init_param.dpr_access_mode = (USIGN8) 0x03; \
init_param.address_mode = (USIGN8) 0x0C; \
init_param.poll_int_mode = (USIGN8) 0x00; \
init_param.time_out = (USIGN8) 0x03
#endif
/************************************************************************/
/* Global function declarations using for 16/32BIT PROFIBUS API and for */
/* compatibility mode using WIN-NT PROFIBUS API */
/************************************************************************/
#ifndef PB_API_FUNC_NOT_USED
#ifdef __cplusplus
extern "C" {
#endif
#ifndef UNDER_RTSS
#ifdef WIN32
FUNCTION extern INT16 CALL_CONV profi_set_default
(
IN USIGN8 Board,
IN USIGN8 Channel,
IN USIGN32 ReadTimeout,
IN USIGN32 WriteTimeout
)
/*----------------------------------------------------------------------------
FUNCTIONAL_DESCRIPTION
This function is used to initialize the WIN32 PROFIBUS-API. The function function
has to be called before any other function of PROFIBUS-API is called.
IN: Board -> number of the PROFIBUS board (0..9)
IN: Channel -> channel number (0)
IN: ReadTimeout -> receive timeout in ms (WAIT_FOREVER for infinite wait)
IN: Writetimeout -> send timeout in ms (WAIT_FOREVER for infinite wait)
Possible return values:
- E_OK -> Interface is initialized
- E_IF_NO_CNTRL_RES -> controller does not respond
- E_IF_INVALID_CNTRL_TYPE_VERSION -> invalid controller type or software version
- E_IF_INIT_INVALID_PARAMETER -> invalid initialize parameter
- E_IF_INVALID_VERSION -> invalid version
- E_IF_NO_CNTRL_PRESENT -> no controller present
- E_IF_INIT_FAILED -> initialization failed
-----------------------------------------------------------------------------*/
;
FUNCTION extern INT16 CALL_CONV profi_init
(
IN USIGN8 Board,
IN USIGN32 ReadTimeout,
IN USIGN32 WriteTimeout
)
/*----------------------------------------------------------------------------
FUNCTIONAL_DESCRIPTION
This function is used to initialize the WIN32 PROFIBUS-API. The function function
has to be called before any other function of PROFIBUS-API is called.
IN: Board -> number of the PROFIBUS board (0..9)
IN: Channel -> channel number (0)
IN: ReadTimeout -> receive timeout in ms (WAIT_FOREVER for infinite wait)
IN: Writetimeout -> send timeout in ms (WAIT_FOREVER for infinite wait)
Possible return values:
- E_OK -> Interface is initialized
- E_IF_NO_CNTRL_RES -> controller does not respond
- E_IF_INVALID_CNTRL_TYPE_VERSION -> invalid controller type or software version
- E_IF_INIT_INVALID_PARAMETER -> invalid initialize parameter
- E_IF_INVALID_VERSION -> invalid version
- E_IF_NO_CNTRL_PRESENT -> no controller present
- E_IF_INIT_FAILED -> initialization failed
-----------------------------------------------------------------------------*/
;
#endif
FUNCTION extern INT16 CALL_CONV init_profibus
(
IN USIGN32 DprAdress,
IN USIGN16 IoPortAdress,
IN PB_BOOL Dummy
)
/*----------------------------------------------------------------------------
FUNCTIONAL_DESCRIPTION
This function is used initialize the PROFIBUS-API with default values and start
the PROFIBUS controller. The function function has to be called before any other
function of PROFIBUS-API is called.
IN: DprAdress -> dummy
IN: IoPortAdress -> dummy
IN: Dummy -> dummy
Possible return values:
- E_OK -> Interface is initialized
- E_IF_NO_CNTRL_RES -> controller does not respond
- E_IF_INVALID_CNTRL_TYPE_VERSION -> invalid controller type or software version
- E_IF_INIT_INVALID_PARAMETER -> invalid initialize parameter
- E_IF_INVALID_VERSION -> invalid version
- E_IF_NO_CNTRL_PRESENT -> no controller present
- E_IF_INIT_FAILED -> initialization failed
-----------------------------------------------------------------------------*/
;
FUNCTION extern INT16 CALL_CONV profi_end(VOID)
/*----------------------------------------------------------------------------
FUNCTIONAL_DESCRIPTION
This function is used to shutdown the PROFIBUS-API and shutdown the PROFIBUS
controller.
Possible return values:
- E_OK
-----------------------------------------------------------------------------*/
;
FUNCTION extern INT16 CALL_CONV profi_snd_req_res
(
IN T_PROFI_SERVICE_DESCR * pSdb,
IN VOID * pData,
IN PB_BOOL dummy
)
/*----------------------------------------------------------------------------
FUNCTIONAL_DESCRIPTION
This function is used to send a Service-Request or a Service-Response
to the PROFIBUS controller.
IN: pSdb -> pointer to SERVICE-DESCRIPTION-BLOCK
IN: pData -> pointer to service specific data
IN: dummy -> dummy
Possible return values:
- E_OK -> no error occured
- E_IF_INVALID_LAYER -> invalid layer
- E_IF_INVALID_SERVICE -> invalid service identifier
- E_IF_INVALID_PRIMITIVE -> invalid service primitive
- E_IF_RESOURCE_UNAVAILABLE -> no resource available
- E_IF_NO_PARALLEL_SERVICES -> no parallel services allowed
- E_IF_SERVICE_CONSTR_CONFLICT -> service temporarily not executable
- E_IF_SERVICE_NOT_SUPPORTED -> service not supported in subset
- E_IF_SERVICE_NOT_EXECUTABLE -> service not executable
- E_IF_NO_CNTRL_RES -> controller does not respond (CMI_TIMEOUT)
?? 快捷鍵說明
復(fù)制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -