### uVision2 Project, (C) Keil Software
### Do not modify !

Target (stm32_can), 0x0004 // Tools: 'ARM-ADS'

Group (Source Group 1)
Group (main)
Group (rcc)
Group (spi)
Group (mcp2515 driver)
Group (can funtion)
Group (include)
Group (uart)

File 1,2,<.\STM32F10x.s><STM32F10x.s>
File 2,1,<.\main\main.c><main.c>
File 3,1,<.\driver\STM32F10x_rcc.c><STM32F10x_rcc.c>
File 4,1,<.\driver\STM32F10x_spi.c><STM32F10x_spi.c>
File 5,1,<.\driver\mcp2515.c><mcp2515.c>
File 6,1,<.\driver\can.c><can.c>
File 7,5,<.\header\can.h><can.h>
File 7,5,<.\header\mcp2515.h><mcp2515.h>
File 7,5,<.\header\mylib.h><mylib.h>
File 7,5,<.\header\rcc.h><rcc.h>
File 7,5,<.\header\stm32f10x_reg.h><stm32f10x_reg.h>
File 7,5,<.\header\type.h><type.h>
File 7,5,<.\header\spi.h><spi.h>
File 7,5,<.\header\hardware.h><hardware.h>
File 7,5,<.\header\uart.h><uart.h>
File 8,1,<.\driver\uart.c><uart.c>


Options 1,0,0  // Target 'stm32_can'
 Device (STM32F101C6)
 Vendor (STMicroelectronics)
 Cpu (IRAM(0x20000000-0x200017FF) IROM(0x8000000-0x0x8007FFF) CLOCK(8000000) CPUTYPE("Cortex-M3"))
 FlashUt ()
 StupF ("STARTUP\ST\STM32F10x.s" ("STM32 Startup Code"))
 FlashDR (UL2CM3(-O14 -S0 -C0 -N00("ARM Cortex-M3") -D00(1BA00477) -L00(4) -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_128 -FS08000000 -FL08000))
 DevID (4250)
 Rgf (stm32f10x_lib.h)
 Mem ()
 C ()
 A ()
 RL ()
 OH ()
 DBC_IFX ()
 DBC_CMS ()
 DBC_AMS ()
 DBC_LMS ()
 UseEnv=0
 EnvBin ()
 EnvInc ()
 EnvLib ()
 EnvReg (