?? copyprint_voice.c
字號:
NEEDLEB_PIN=1;
NEEDLEC_PIN=1;
NEEDLED_PIN=1;
SCON=0x90;
PCON=0x00;
TMOD=0x11; //timer 0 mode 1
ES=1;
EA=1;
receive_item=0;
receive_num=0;
paper_end_flg=0;
hired_off_flg=0;
hired_on_flg=0;
hired_on_receive_end_flg_for_print=0;
hired_off_receive_end_flg_for_print=0;
for(;;)
{
if(check_paper_end()&&!paper_end_flg)
{
paper_end_flg=1;
send_to_main_cpu(PAPER_END_COM);
}
if(!check_paper_end()&&paper_end_flg)
{
POWER_G=0;
while(1)
{
if(!BLACK_DOT) //when black dot comes,it is low.waiting when it is high.
{
delay1ms(200);
delay1ms(200);
delay1ms(200);
if(!BLACK_DOT)
{
while(!BLACK_DOT);
if(!PAPER_END)
{
paper_end_flg=0;
send_to_main_cpu(PAPER_INSERT_COM);
}
POWER_G=1;
break;
}
}
}
}
if(hired_on_receive_end_flg_for_print)
{
//POWER_G=0;
print_hired_on();
hired_on_receive_end_flg_for_print=0;
}
if(hired_off_receive_end_flg_for_print)
{
print_hired_off();
hired_off_receive_end_flg_for_print=0;
}
if(paper_run_flg){
paper_run();
paper_run_flg=0;
}
}
}
void receive_data(void) interrupt 4 using 3{
RI=0;
if(RB8)
{
switch(SBUF)
{
case 0xab:
paper_run_flg=1;
SM2=0;
break;
case 0xcd:
print_start_flg=1;
SM2=0;
break;
case 0xda:
hired_on_flg=1;
hired_off_flg=0;
receive_item++;
receive_num=0;
SM2=0;
break;
case 0xdb:
hired_off_flg=1;
hired_on_flg=0;
receive_item++;
receive_num=0;
SM2=0;
break;
case 0xee:
key_send_ready_start_flg=1;
SM2=0;
break;
case 0xcc:
if(key_send_ready_start_flg)
{
if(key_send_ready_com==ALLOW_RECEIVE_KEY_VALUE_COM)key_send_ready_end_flg=1;
if(key_send_ready_com==KEY_MULTI_PRESS_ALLOW_COM)key_multi_press_allow_flg=1;
if(key_send_ready_com== KEY_MULTI_PRESS_INHIBIT_COM)key_multi_press_allow_flg=0;
}
SM2=0;
}
}
else if(hired_on_flg)
{
switch(receive_item)
{
case 1:
bill_number[receive_num]=SBUF; //when entering hired on the data is unit
break;
case 2:
unit[receive_num]=SBUF; //when entering hired on the data is unit
break;
case 3:
tele_num[receive_num]=SBUF; //when entering hired on the data is tele
break;
case 4:
car_num[receive_num]=SBUF; //when entering hired on the data is car num
break;
case 5:
linsence[receive_num]=SBUF; //when entering hired on the data is lisence num
break;
case 6:
get_on_date[receive_num]=SBUF; //when entering hired on the data is get on data
break;
case 7: //for entering hired_on, get on time
get_on_time[receive_num]=SBUF;
if(receive_num==7)
{
hired_on_receive_end_flg_for_print=1;
hired_on_flg=0;
receive_item=0;
}
break;
}
receive_num++;
}
else if(hired_off_flg)
{
switch(receive_item)
{
case 1:
get_off_time[receive_num]=SBUF; //when entering hired on the data is unit
break;
case 2:
price[receive_num]=SBUF; //when entering hired on the data is tele
break;
case 3:
distance[receive_num]=SBUF; //when entering hired on the data is car num
break;
case 4:
total_waiting_time[receive_num]=SBUF; //when entering hired on the data is lisence num
break;
case 5:
fare[receive_num]=SBUF; //when entering hired on the data is get on data
if(receive_num==7)
{
hired_off_receive_end_flg_for_print=1;
receive_item=0;
hired_off_flg=0;
}
break;
}
receive_num++;
}
if(key_send_ready_start_flg)key_send_ready_com=SBUF;
}
/****************************************************************
* 按順序打印進入重車時的信息，打印之前先查是否有黑點 *
****************************************************************/
void print_hired_on(void){
// uchar i;
POWER_G=0;
NEEDLEB_PIN=1;
NEEDLEC_PIN=1;
NEEDLED_PIN=1;
CLK=1;
// while(!BLACK_DOT); //when black dot comes,it is low.waiting when it is high.
// while(BLACK_DOT); //when black dot comes,it is low.waiting when it is high.
// print_some_space_charactor_line(6);
// insert_some_space_dot_line(12);
print_public_part(0);
while(!RST);
POWER_G=1;
paper_end_flg=0;
NEEDLEB_PIN=1;
NEEDLEC_PIN=1;
NEEDLED_PIN=1;
}
void print_some_space_charactor_line(uchar lines){
uchar i;
for(i=0;i<8;i++)space_data[i]=37;
for(i=0;i<lines;i++){
print_one_charactor_line(space_data,space_data);
insert_some_space_dot_line(6);
}
}
/**************************************************************************************************
*此程序打印一個字符行，一個字符行就是一行字符。 *
*首先加載原始數據到位尋址變量中，根據該變量值的大小，決定是從SECODE1還是從SECODE2中取打印點陣碼。**
*在此只考慮了C和D兩陣的驅動，打印的是后面8個字符。 *
***************************************************************************************************/
void print_one_charactor_line(uchar *item,uchar *printed_data)
{
uchar dotline,i;
for(dotline=0;dotline<7;dotline++)
{ //一行字符需打印7點行點陣數據
while(!RST);
for(i=0;i<4;i++){ //兩針打印8個字符，循環4次，將其點陣表中的數據賦于
value_a=item[i]; //C 和 D 兩針所對應的變量VALUE_C和VALUE_D中
if(value_a>35)value_a=secode2[(value_a-36)*7+dotline];
else value_a=secode1[(value_a*7+dotline)];
value_b=item[i+4];
if(value_b>35)value_b=secode2[(value_b-36)*7+dotline];
else value_b=secode1[value_b*7+dotline];
value_a<<=2;
value_b<<=2;
// print_one_dot_charactor();
value_c=printed_data[i]; //C 和 D 兩針所對應的變量VALUE_C和VALUE_D中
if(value_c>35)value_c=secode2[(value_c-36)*7+dotline];
else value_c=secode1[(value_c*7+dotline)];
value_d=printed_data[i+4];
if(value_d>35)value_d=secode2[(value_d-36)*7+dotline];
else value_d=secode1[value_d*7+dotline];
value_c<<=2;
value_d<<=2;
print_one_dot_charactor();
}
}
}
/***********************************************************************************************
* 打印一個點字符，一個點字符的意思是一個字符的一行點陣，此程序打印了四根針上的各一個點字符?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -