# Port on which the server is listening. You must select a different# port from your standard HTTP web server if it is running on the same# computer.Port 8090# Address on which the server is bound. Only useful if you have# several network interfaces.BindAddress 0.0.0.0# Number of simultaneous requests that can be handled. Since FFServer# is very fast, it is more likely that you will want to leave this high# and use MaxBandwidth, below.MaxClients 1000# This the maximum amount of kbit/sec that you are prepared to# consume when streaming to clients.MaxBandwidth 1000# Access log file (uses standard Apache log file format)# '-' is the standard output.CustomLog -# Suppress that if you want to launch ffserver as a daemon.NoDaemon################################################################### Definition of the live feeds. Each live feed contains one video# and/or audio sequence coming from an ffmpeg encoder or another# ffserver. This sequence may be encoded simultaneously with several# codecs at several resolutions.<Feed feed1.ffm># You must use 'ffmpeg' to send a live feed to ffserver. In this# example, you can type:## ffmpeg http://localhost:8090/feed1.ffm# ffserver can also do time shifting. It means that it can stream any# previously recorded live stream. The request should contain:# "http://xxxx?date=[YYYY-MM-DDT][[HH:]MM:]SS[.m...]".You must specify# a path where the feed is stored on disk. You also specify the# maximum size of the feed, where zero means unlimited. Default:# File=/tmp/feed_name.ffm FileMaxSize=5MFile /tmp/feed1.ffmFileMaxSize 200K# You could specify# ReadOnlyFile /saved/specialvideo.ffm# This marks the file as readonly and it will not be deleted or updated.# Specify launch in order to start ffmpeg automatically.# First ffmpeg must be defined with an appropriate path if needed,# after that options can follow, but avoid adding the http:// field#Launch ffmpeg# Only allow connections from localhost to the feed.ACL allow 127.0.0.1</Feed>################################################################### Now you can define each stream which will be generated from the# original audio and video stream. Each format has a filename (here# 'test1.mpg'). FFServer will send this stream when answering a# request containing this filename.<Stream test1.mpg># coming from live feed 'feed1'Feed feed1.ffm# Format of the stream : you can choose among:# mpeg       : MPEG-1 multiplexed video and audio# mpegvideo  : only MPEG-1 video# mp2        : MPEG-2 audio (use AudioCodec to select layer 2 and 3 codec)# ogg        : Ogg format (Vorbis audio codec)# rm         : RealNetworks-compatible stream. Multiplexed audio and video.# ra         : RealNetworks-compatible stream. Audio only.# mpjpeg     : Multipart JPEG (works with Netscape without any plugin)# jpeg       : Generate a single JPEG image.# asf        : ASF compatible streaming (Windows Media Player format).# swf        : Macromedia Flash compatible stream# avi        : AVI format (MPEG-4 video, MPEG audio sound)# master     : special ffmpeg stream used to duplicate a serverFormat mpeg# Bitrate for the audio stream. Codecs usually support only a few# different bitrates.AudioBitRate 32# Number of audio channels: 1 = mono, 2 = stereoAudioChannels 1# Sampling frequency for audio. When using low bitrates, you should# lower this frequency to 22050 or 11025. The supported frequencies# depend on the selected audio codec.AudioSampleRate 44100# Bitrate for the video streamVideoBitRate 64# Ratecontrol buffer sizeVideoBufferSize 40# Number of frames per secondVideoFrameRate 3# Size of the video frame: WxH (default: 160x128)# The following abbreviations are defined: sqcif, qcif, cif, 4cif, qqvga,# qvga, vga, svga, xga, uxga, qxga, sxga, qsxga, hsxga, wvga, wxga, wsxga,# wuxga, woxga, wqsxga, wquxga, whsxga, whuxga, cga, ega, hd480, hd720,# hd1080VideoSize 160x128# Transmit only intra frames (useful for low bitrates, but kills frame rate).#VideoIntraOnly# If non-intra only, an intra frame is transmitted every VideoGopSize# frames. Video synchronization can only begin at an intra frame.VideoGopSize 12# More MPEG-4 parameters# VideoHighQuality# Video4MotionVector# Choose your codecs:#AudioCodec mp2#VideoCodec mpeg1video# Suppress audio#NoAudio# Suppress video#NoVideo#VideoQMin 3#VideoQMax 31# Set this to the number of seconds backwards in time to start. Note that# most players will buffer 5-10 seconds of video, and also you need to allow# for a keyframe to appear in the data stream.#Preroll 15# ACL:# You can allow ranges of addresses (or single addresses)#ACL ALLOW <first address> <last address># You can deny ranges of addresses (or single addresses)#ACL DENY <first address> <last address># You can repeat the ACL allow/deny as often as you like. It is on a per# stream basis. The first match defines the action. If there are no matches,# then the default is the inverse of the last ACL statement.## Thus 'ACL allow localhost' only allows access from localhost.# 'ACL deny 1.0.0.0 1.255.255.255' would deny the whole of network 1 and# allow everybody else.</Stream>################################################################### Example streams# Multipart JPEG#<Stream test.mjpg>#Feed feed1.ffm#Format mpjpeg#VideoFrameRate 2#VideoIntraOnly#NoAudio#Strict -1#</Stream># Single JPEG#<Stream test.jpg>#Feed feed1.ffm#Format jpeg#VideoFrameRate 2#VideoIntraOnly##VideoSize 352x240#NoAudio#Strict -1#</Stream># Flash#<Stream test.swf>#Feed feed1.ffm#Format swf#VideoFrameRate 2#VideoIntraOnly#NoAudio#</Stream># ASF compatible<Stream test.asf>Feed feed1.ffmFormat asfVideoFrameRate 15VideoSize 352x240VideoBitRate 256VideoBufferSize 40VideoGopSize 30AudioBitRate 64StartSendOnKey</Stream># MP3 audio#<Stream test.mp3>#Feed feed1.ffm#Format mp2#AudioCodec mp3#AudioBitRate 64#AudioChannels 1#AudioSampleRate 44100#NoVideo#</Stream># Ogg Vorbis audio#<Stream test.ogg>#Feed feed1.ffm#Title "Stream title"#AudioBitRate 64#AudioChannels 2#AudioSampleRate 44100#NoVideo#</Stream># Real with audio only at 32 kbits#<Stream test.ra>#Feed feed1.ffm#Format rm#AudioBitRate 32#NoVideo#NoAudio#</Stream># Real with audio and video at 64 kbits#<Stream test.rm>#Feed feed1.ffm#Format rm#AudioBitRate 32#VideoBitRate 128#VideoFrameRate 25#VideoGopSize 25#NoAudio#</Stream>################################################################### A stream coming from a file: you only need to set the input# filename and optionally a new format. Supported conversions:#    AVI -> ASF#<Stream file.rm>#File "/usr/local/httpd/htdocs/tlive.rm"#NoAudio#</Stream>#<Stream file.asf>#File "/usr/local/httpd/htdocs/test.asf"#NoAudio#Author "Me"#Copyright "Super MegaCorp"#Title "Test stream from disk"#Comment "Test comment"#</Stream>################################################################### RTSP examples## You can access this stream with the RTSP URL:#   rtsp://localhost:5454/test1-rtsp.mpg## A non-standard RTSP redirector is also created. Its URL is:#   http://localhost:8090/test1-rtsp.rtsp#<Stream test1-rtsp.mpg>#Format rtp#File "/usr/local/httpd/htdocs/test1.mpg"#</Stream>################################################################### SDP/multicast examples## If you want to send your stream in multicast, you must set the# multicast address with MulticastAddress. The port and the TTL can# also be set.## An SDP file is automatically generated by ffserver by adding the# 'sdp' extension to the stream name (here# http://localhost:8090/test1-sdp.sdp). You should usually give this# file to your player to play the stream.## The 'NoLoop' option can be used to avoid looping when the stream is# terminated.#<Stream test1-sdp.mpg>#Format rtp#File "/usr/local/httpd/htdocs/test1.mpg"#MulticastAddress 224.124.0.1#MulticastPort 5000#MulticastTTL 16#NoLoop#</Stream>################################################################### Special streams# Server status<Stream stat.html>Format status# Only allow local people to get the statusACL allow localhostACL allow 192.168.0.0 192.168.255.255#FaviconURL http://pond1.gladstonefamily.net:8080/favicon.ico</Stream># Redirect index.html to the appropriate site<Redirect index.html>URL http://www.ffmpeg.org/</Redirect>