/* $Id: xparameters.h,v 1.61 2004/05/11 21:57:29 linnj Exp $ *//********************************************************************************       XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"*       AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND*       SOLUTIONS FOR XILINX DEVICES.  BY PROVIDING THIS DESIGN, CODE,*       OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,*       APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION*       THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,*       AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE*       FOR YOUR IMPLEMENTATION.  XILINX EXPRESSLY DISCLAIMS ANY*       WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE*       IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR*       REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF*       INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS*       FOR A PARTICULAR PURPOSE.**       (c) Copyright 2002 Xilinx Inc.*       All rights reserved.*******************************************************************************//*****************************************************************************//**** @file xparameters.h** This file contains system parameters for the Xilinx device driver environment.* It is a representation of the system in that it contains the number of each* device in the system as well as the parameters and memory map for each* device.  The user can view this file to obtain a summary of the devices in* their system and the device parameters.** This file may be automatically generated by a design tool such as System* Generator.*******************************************************************************//***************************** Include Files *********************************/#ifndef XPARAMETERS_H    /* prevent circular inclusions */#define XPARAMETERS_H    /* by using protection macros *//* unifying driver changesadded XPAR_INTC_0_ACK_BEFORE, XPAR_INTC_1_ACK_BEFOREchanged XPAR_INTC_MAX_ID to XPAR_INTC_MAX_NUM_INTR_INPUTSdeleted XPAR_INTC_0_MAX_ID, XPAR_INTC_1_MAX_ID*//************************** Constant Definitions *****************************//* * The following constants are for each device. * * An instance must exist for each physical device that exists in the system. * The device IDs in the following constants are unique between all devices to * allow device IDs to be searched in the future. *//***************************************************************************** * * System Level defines. These constants are for devices that do not require * a device driver. Examples of these types of devices include volatile RAM * devices. */#define XPAR_ZBT_NUM_INSTANCES   1#define XPAR_ZBT_0_BASE          0x00000000#define XPAR_ZBT_0_SIZE          0x00100000#define XPAR_SRAM_NUM_INSTANCES  1#define XPAR_SRAM_0_BASE         0x00100000#define XPAR_SRAM_0_SIZE         0x00200000#define XPAR_DDR_NUM_INSTANCES   1#define XPAR_DDR_0_BASE          0xF0000000#define XPAR_DDR_0_SIZE          0x01000000#define XPAR_CORE_CLOCK_FREQ_HZ  12500000#define XPAR_CPU_PPC405_CORE_CLOCK_FREQ_HZ  XPAR_CORE_CLOCK_FREQ_HZ/***************************************************************************** * * Interrupt Controller (Intc) defines. * DeviceID starts at 0 */#define XPAR_XINTC_NUM_INSTANCES        2          /* Number of instances */#define XPAR_INTC_MAX_NUM_INTR_INPUTS  31         /* max # inputs of all */#define XPAR_INTC_SINGLE_BASEADDR      0x70800000 /* low level driver base */#define XPAR_INTC_SINGLE_DEVICE_ID     0          /* single instance ID */#define XPAR_INTC_SINGLE_ACK_BEFORE    0xFFFF00FF /* low level driver */#define XPAR_INTC_0_DEVICE_ID          1          /* Device ID for instance */#define XPAR_INTC_0_ACK_BEFORE         0xFFFF00FF /* Ack timing, before/after */#define XPAR_INTC_0_BASEADDR           0x70800000 /* Register base address */#define XPAR_INTC_0_UARTLITE_0_VEC_ID  4          /* Interrupt source for vector */#define XPAR_INTC_0_WDTTB_0_VEC_ID     5          /* Interrupt source for vector */#define XPAR_INTC_0_WD_0_VEC_ID        6          /* Interrupt source for vector */#define XPAR_INTC_0_TMRCTR_0_VEC_ID    7          /* Interrupt source for vector */#define XPAR_INTC_0_SPI_0_VEC_ID       11         /* Interrupt source for vector */#define XPAR_INTC_0_IIC_0_VEC_ID       12         /* Interrupt source for vector */#define XPAR_INTC_0_UARTNS550_0_VEC_ID 13         /* Interrupt source for vector */#define XPAR_INTC_0_UARTNS550_1_VEC_ID 14         /* Interrupt source for vector */#define XPAR_INTC_0_EMAC_0_VEC_ID      15         /* Interrupt source for vector */#define XPAR_INTC_1_DEVICE_ID          2          /* Device ID for instance */#define XPAR_INTC_1_ACK_BEFORE         0xFFFF00FF /* Ack timing, before/after */#define XPAR_INTC_1_BASEADDR           0x70800020 /* Register base address */#define XPAR_INTC_1_OPB_TO_PLB_ERR_VEC_ID 0       /* Interrupt source for vector */#define XPAR_INTC_1_PLB_TO_OPB_ERR_VEC_ID 1       /* Interrupt source for vector *//***************************************************************************** * * Ethernet 10/100 MAC defines. * DeviceID starts at 10 */#define XPAR_XEMAC_NUM_INSTANCES      1          /* Number of instances */#define XPAR_EMAC_0_DEVICE_ID        10         /* Device ID for instance */#define XPAR_EMAC_0_BASEADDR         0x60000000 /* Device base address */#define XPAR_EMAC_0_DMA_PRESENT      XFALSE     /* Does device have DMA? */#define XPAR_EMAC_0_ERR_COUNT_EXIST  XTRUE      /* Does device have counters? */#define XPAR_EMAC_0_MII_EXIST        XTRUE      /* Does device support MII? *//***************************************************************************** * * NS16550 UART defines. * DeviceID starts at 20 */#define XPAR_XUARTNS550_NUM_INSTANCES 1          /* Number of instances */#define XPAR_UARTNS550_0_DEVICE_ID   20         /* Device ID for instance */#define XPAR_UARTNS550_0_BASEADDR    0xA0010000 /* IPIF base address */#define XPAR_UARTNS550_0_CLOCK_HZ    (66000000L)/* 66 MHz clock */#define XPAR_UARTNS550_1_DEVICE_ID   21         /* Device ID for instance */#define XPAR_UARTNS550_1_BASEADDR    0xA0000000 /* IPIF base address */#define XPAR_UARTNS550_1_CLOCK_HZ    (66000000L)/* 66 MHz clock *//***************************************************************************** * * UartLite defines. * DeviceID starts at 30 */#define XPAR_XUARTLITE_NUM_INSTANCES 1         /* Number of instances */#define XPAR_UARTLITE_0_DEVICE_ID   30         /* Device ID for instance */#define XPAR_UARTLITE_0_BASEADDR    0xA0020000 /* Device base address */#define XPAR_UARTLITE_0_BAUDRATE    19200      /* Baud rate */#define XPAR_UARTLITE_0_USE_PARITY  XFALSE     /* Parity generator enabled */#define XPAR_UARTLITE_0_ODD_PARITY  XFALSE     /* Type of parity generated */#define XPAR_UARTLITE_0_DATA_BITS   8          /* Data bits *//***************************************************************************** * * ATM controller defines. * DeviceID starts at 40 */#define XPAR_XATMC_NUM_INSTANCES     1         /* Number of instances */#define XPAR_ATMC_0_DEVICE_ID       40         /* Device ID for instance */#define XPAR_ATMC_0_BASEADDR        0x70000000 /* Device base address */#define XPAR_ATMC_0_DMA_PRESENT     XFALSE     /* Does device have DMA? *//***************************************************************************** * * Serial Peripheral Interface (SPI) defines. * DeviceID starts at 50 */#define XPAR_XSPI_NUM_INSTANCES      2          /* Number of instances */#define XPAR_SPI_0_DEVICE_ID        50         /* Device ID for instance */#define XPAR_SPI_0_BASEADDR         0x50000000 /* Device base address */#define XPAR_SPI_0_FIFO_EXIST       XTRUE      /* Does device have FIFOs? */#define XPAR_SPI_0_SLAVE_ONLY       XFALSE     /* Is the device slave only? */#define XPAR_SPI_0_NUM_SS_BITS      32         /* Number of slave select bits */#define XPAR_SPI_1_DEVICE_ID        51         /* Device ID for instance */#define XPAR_SPI_1_BASEADDR         0x50000100 /* IPIF base address */#define XPAR_SPI_1_FIFO_EXIST       XTRUE      /* Does device have FIFOs? */#define XPAR_SPI_1_SLAVE_ONLY       XFALSE     /* Is the device slave only? */#define XPAR_SPI_1_NUM_SS_BITS      32         /* Number of slave select bits *//***************************************************************************** * * OPB Arbiter defines. * DeviceID starts at 60 */#define XPAR_XOPBARB_NUM_INSTANCES 1           /* Number of instances */#define XPAR_OPBARB_0_DEVICE_ID    60         /* Device ID for instance */#define XPAR_OPBARB_0_BASEADDR     0x80000000 /* Register base address */#define XPAR_OPBARB_0_NUM_MASTERS  8          /* Number of masters on bus *//***************************************************************************** * * Watchdog timer/timebase (WdtTb) defines. * DeviceID starts at 70 */#define XPAR_XWDTTB_NUM_INSTANCES   1          /* Number of instances */#define XPAR_WDTTB_0_DEVICE_ID      70         /* Device ID for instance */#define XPAR_WDTTB_0_BASEADDR       0x70800040 /* Register base address *//***************************************************************************** * * Timer Counter (TmrCtr) defines. * DeviceID starts at 80 */#define XPAR_XTMRCTR_NUM_INSTANCES  2          /* Number of instances */#define XPAR_TMRCTR_0_DEVICE_ID     80         /* Device ID for instance */#define XPAR_TMRCTR_0_BASEADDR      0x70800100 /* Register base address *//***************************************************************************** * * IIC defines. * DeviceID starts at 90 */#define XPAR_XIIC_NUM_INSTANCES      2          /* Number of instances */#define XPAR_IIC_0_DEVICE_ID        90         /* Device ID for instance */#define XPAR_IIC_0_BASEADDR         0xA8000000 /* Device base address */#define XPAR_IIC_0_TEN_BIT_ADR      XTRUE      /* Supports 10 bit addresses */#define XPAR_IIC_1_DEVICE_ID        91         /* Device ID for instance */#define XPAR_IIC_1_BASEADDR         0xA8000000 /* Device base address */#define XPAR_IIC_1_TEN_BIT_ADR      XTRUE      /* Supports 10 bit addresses */