iwpriv=================This is detailed explanation of each parameters for iwpriv.Before reading this document, make sure you already read README.-------------------------------------------------------------------------------------------------------USAGE:	iwpriv ra0 commands valNOTE:	Wireless Extension Private Handlerswhere[commands]              [val] 						{range}-----------------   	-------------------------------------------------wsc_conf_mode			{0, 1, 2}						::Set WPS conf mode						0: WPS Disabled						1: Enrollee						2: Registrarwsc_mode				{1, 2}						::PIN or PBC						1: PIN						2: PBCwsc_pin					{00000000 ~ 99999999}						::Set Enrollee's PIN Codewsc_ssid				{0~z, 1~32 ascii characters}						::Set WPS AP SSIDwsc_start				NULL						::Trigger RT2860 STA driver to do WPS processwsc_stop				NULL						::Stop WPS processwsc_gen_pincode			NULL						::Generate new PIN codewsc_cred_count			{1 ~ 8}						::Set count of WPS credentialwsc_cred_ssid			{"idx ssid_str"}						::Set SSID into credtentail[idx]						idx: 0 ~ 7						ssid_str: 0~z, 1~32 ascii characterswsc_cred_auth			{"idx auth_str"}						::Set AuthMode into credtentail[idx]						idx: 0 ~ 7						auth_str: OPEN, WPAPSK, WPA2PSK, SHARED, WPA, WPA2wsc_cred_encr			{"idx encr_str"}						::Set EncrypType into credtentail[idx]						idx: 0 ~ 7				 		encr_str: NONE, WEP, TKIP, AESwsc_cred_keyIdx			{"idx key_index"}						::Set Key Index into credtentail[idx]						idx: 0 ~ 7						key_index: 1 ~ 4wsc_cred_key			{"idx key"}						::Set Key into credtentail[idx]						idx: 0 ~ 7						key: ASCII string (wep_key_len(=5,13), passphrase_len(=8~63)) 					  		 OR 					  		 Hex string (wep_key_len(=10,26), passphrase_len(=64))wsc_cred_mac			{"idx mac_str"}						::Set AP's MAC into credtentail[idx]						idx: 0 ~ 7						mac_str: xx:xx:xx:xx:xx:xxwsc_conn_by_idx			{0 ~ 7}						::Connect AP by credential indexwsc_auto_conn			{0, 1}						::Set driver to re-connecting to AP or not after registration.						0: Disabled, driver won't re-connect to AP with new configurations.						1: Enabled, driver will re-connect to AP with new configurations.-------------------------------------------------------------------------------------------------------USAGE:	iwpriv ra0 set [parameters]=[val]	NOTE:	Execute one iwpriv/set command simultaneously.	where		[parameters]        	[val] 						{range}-----------------   	-------------------------------------------------CountryRegion       	{0~7}						::Set country region                                   							0: 1 ~ 11 ch						1: 1 ~ 13 ch						2: 10, 11 ch						3: 10 ~ 13 ch						4: 14 ch						5: 1 ~ 14 ch						6: 3 ~ 9 ch						7: 5 ~ 13 Channel											CountryRegionABand		{0~11}						::Set country region for A band  										                                              					0: 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 ch						1: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 ch						2: 36, 40, 44, 48, 52, 56, 60, 64 ch						3: 52, 56, 60, 64, 149, 153, 157, 161 ch						4: 149, 153, 157, 161, 165 ch						5: 149, 153, 157, 161 ch						6: 36, 40, 44, 48 ch						7: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165 ch						8: 52, 56, 60, 64 ch						9: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140, 149, 153, 157, 161, 165 ch					   10: 36, 40, 44, 48, 149, 153, 157, 161, 165 ch					   11: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 149, 153, 157, 161 ch                                                           SSID                	{0~z, 1~32 ascii characters} 			                    	::Set AP SSID                    	WirelessMode        	{0~10}						::Set Wireless Mode								                     	0: legacy 11b/g mixed 						1: legacy 11B only 						2: legacy 11A only						3: legacy 11a/b/g mixed						4: legacy 11G only						5: 11ABGN mixed						6: 11N only						7: 11GN mixed						8: 11AN mixed						9: 11BGN mixed	   				   10: 11AGN mixed	                    	Channel             	depends on CountryRegion or CountryRegionForABand                        ::Set Channel                    	BGProtection        	{0~2}						::Set 11B/11G Protection                                   	                   		0:Auto,                    		1:Always on,                    		2:Always off                    	TxPreamble          	{0~2}						::Set TxPreamble                    	0:Preamble Long,                     	1:Preamble Short,                     	2:Auto                    	RTSThreshold        	{1~2347}                               	                                                                               	::Set RTS Threshold                    	                                       FragThreshold       	{256~2346}						::Set Fragment Threshold                             	                    	TxBurst             	{0,1}						::Set TxBurst Enable or Disable                                  	                  		0:Disable,                   		1:EnableNetworkType	    		{Infra,Adhoc}    					::Set Network type    					 									                                                                                                                                                        	                                                          AuthMode            	{OPEN,SHARED,WEPAUTO,WPAPSK,WPA2PSK,WPANONE}                        ::Set Authentication Mode 	EncrypType          	{NONE,WEP,TKIP,AES}          									::Set Encryption Type						 DefaultKeyID        	{1~4}                              								::Set Default Key ID												Key1                 	{5 ascii characters or 10 hex number or                      	13 ascii characters or 26 hex numbers}                     	::Set Key1 String                                                                                                                        Key2                 	{5 ascii characters or 10 hex number or                      	13 ascii characters or 26 hex numbers}                                                                                                                                              	::Set Key2 String                      	           	Key3                 	{5 ascii characters or 10 hex number or                      	13 ascii characters or 26 hex numbers}                                                                                                                        						::Set Key3 String						 Key4                 	{5 ascii characters or 10 hex number or                      	13 ascii characters or 26 hex numbers}                                                                                                                                                ::Set Key4 String                                                        WPAPSK              	{8~63 ascii or 64 hex characters} 		 						::WPA Pre-Shared Key                    																		WmmCapable				{0,1}						::Set WMM Capable						0:Disable WMM, 						1:Enable WMMPSMode					{CAM, MAX_PSP, FAST_PSP}						::Set Power Saving ModeHtBw					{0,1}						::Set BandWidth						0: 20Hz						1: 40HzHtMcs					{0 ~ 15, 33}						::Set MCS						33: Auto RateHtGi					{0,1}						::Set Guard Interval(GI)						0: long GI						1: short GIHtOpMode				{0,1}						::Set HT Operation Mode						0: HT mixed format						1: HT greenfield formatHtExtcha				{0,1}						::Set Extended Channel Switch Announcement						0: Below						1: AboveHtMpduDensity			{0 ~ 7}						::Set The Minimum Time Between MPDUs within an AMPDUHtBaWinSize				{1 ~ 64}						::Set BA WinSizeHtRdg					{0,1}						::Set RDG Capable						0: Disabled						1: EnabledHtAmsdu					{0,1}						::Set AMSDU Capable						0: Disabled						1: EnabledHtAutoBa				{0,1}						::Set Auto BA Capable						0: Disabled						1: EnabledHtBaDecline				{0,1}						::Reject BA request from AP						0: Disabled						1: EnabledHtProtect				{0,1}						::Set HT Protect Capable						0: Disabled						1: EnabledFixedTxMode				{CCK, OFDM}						:: Set Fixed Tx Mode for fixed rate setting						Mode = CCK						MCS = 0		=> 1Mbps							= 1		=> 2Mbps							= 2		=> 5.5 Mbps							= 3		=> 11 Mbps						Mode = OFDM						MCS = 0		=> 6Mbps						 	= 1		=> 9Mbps							= 2		=> 12Mbps							= 3		=> 18Mbps							= 4		=> 24Mbps							= 5		=> 36Mbps							= 6		=> 48Mbps							= 7		=> 54Mbps==> Build Ethernet Convert function. Please set 'HAS_ETH_CONVERT_SUPPORT=y' in os/linux/config.mkEthConvertMode			{dongle, clone, hybrid}						::Set Ethernet Convert ModeEthCloneMac				{xx:xx:xx:xx:xx:xx}						:: Set Clone MACLongRetry				{0,255}						:: Set Tx Long Retry LimitShortRetry				{0,255}						:: Set Tx Short Retry LimitMeshId					{Length 1~32 ascii characters}						:: Set Mesh IDMeshHostName			{Length 1~32 ascii characters}						:: Set Mesh Host NameMeshAutoLink			{1,0}						:: Set Mesh Auto Link Capable						0: Disabled						1: EnabledMeshAddLink				{xx:xx:xx:xx:xx:xx}						:: Add Mesh LinkMeshDelLink				{xx:xx:xx:xx:xx:xx}						:: Delete Mesh LinkMeshMultiCastAgeOut		{20 ~ 65535 seconds}						:: Set AgeOut time for Mesh MultiCastMeshAuthMode			{OPEN, WPANONE}						:: Set Mesh Authentication ModeMeshEncrypType			{NONE, WEP, TKIP, AES}						:: Set Mesh Encryption TypeMeshDefaultkey			{1 ~ 4}						:: Set Mesh Default Key IDMeshWEPKEY				{5 ascii characters or 10 hex number or                      	13 ascii characters or 26 hex numbers}                     	:: Set Mesh WEP Key StringMeshWPAKEY				{8~63 ascii or 64 hex characters}						:: Set Mesh WPA Pre-Shared KeyExamples===================================================================-------------------------------------------------------------------------------------------------------a> Config STA to link with AP which is OPEN/NONE(Authentication/Encryption)	1. iwpriv ra0 set NetworkType=Infra	2. iwpriv ra0 set AuthMode=OPEN	3. iwpriv ra0 set EncrypType=NONE	4. iwpriv ra0 set SSID="AP's SSID"	b> Config STA to link with AP which is SHARED/WEP(Authentication/Encryption)	1. iwpriv ra0 set NetworkType=Infra	2. iwpriv ra0 set AuthMode=SHARED	3. iwpriv ra0 set EncrypType=WEP	4. iwpriv ra0 set DefaultKeyID=1	5. iwpriv ra0 set Key1="AP's wep key"	6. iwpriv ra0 set SSID="AP's SSID"	c> Config STA to link with AP which is WPAPSK/TKIP(Authentication/Encryption)	1. iwpriv ra0 set NetworkType=Infra	2. iwpriv ra0 set AuthMode=WPAPSK	3. iwpriv ra0 set EncrypType=TKIP	4. iwpriv ra0 set SSID="AP's SSID"	5. iwpriv ra0 set WPAPSK="AP's wpa-preshared key"	6. iwpriv ra0 set SSID="AP's SSID"	d> Config STA to link with AP which is WPAPSK/AES(Authentication/Encryption)	1. iwpriv ra0 set NetworkType=Infra	2. iwpriv ra0 set AuthMode=WPAPSK	3. iwpriv ra0 set EncrypType=AES	4. iwpriv ra0 set SSID="AP's SSID"	5. iwpriv ra0 set WPAPSK="AP's wpa-preshared key"	6. iwpriv ra0 set SSID="AP's SSID"e> Config STA to link with AP which is WPA2PSK/TKIP(Authentication/Encryption)	1. iwpriv ra0 set NetworkType=Infra	2. iwpriv ra0 set AuthMode=WPA2PSK	3. iwpriv ra0 set EncrypType=TKIP	4. iwpriv ra0 set SSID="AP's SSID"	5. iwpriv ra0 set WPAPSK=12345678	6. iwpriv ra0 set SSID="AP's SSID"	f> Config STA to create/link as adhoc mode, which is OPEN/NONE(Authentication/Encryption)	1. iwpriv ra0 set NetworkType=Adhoc	2. iwpriv ra0 set AuthMode=OPEN	3. iwpriv ra0 set EncrypType=NONE	4. iwpriv ra0 set SSID="Adhoc's SSID"g>  Config STA to create/link as adhoc mode, which is WPANONE/TKIP(Authentication/Encryption)    1. iwpriv ra0 set NetworkType=Adhoc	2. iwpriv ra0 set AuthMode=WPANONE	3. iwpriv ra0 set EncrypType=TKIP	4. iwpriv ra0 set SSID="AP's SSID"	5. iwpriv ra0 set WPAPSK=12345678	6. iwpriv ra0 set SSID="AP's SSID"  h> Get site survey 	usage: iwpriv ra0 get_site_survey		i> Get Statistics 	usage: iwpriv ra0 stat						; read statistic counter		   iwpriv ra0 set ResetCounter=0		; reset statistic counterj> Link with an AP which is the largest strength   ; set ANY SSID (ssidLen=0)   usage: iwconfig ra0 essid ""                    or   usage: iwpriv ra0 set SSID=""k> Config STA to link as dongle mode with STA own MAC	usage: iwpriv ra0 set EthConvertMode=donglel> Config STA to link as clone mode	usage: iwpriv ra0 set EthConvertMode=clone		   iwpriv ra0 set EthCloneMac="Desired MAC"		;; 00:00:00:00:00:00 means using STA own MAC														;; FF:FF:FF:FF:FF:FF means using source MAC of first packet coming from wired devicem> Config STA to link as hybrid(dongle+clone) mode	usage: iwpriv ra0 set EthConvertMode=hybrid		   iwpriv ra0 set EthCloneMac="Desired MAC"		;; 00:00:00:00:00:00 means using STA own MAC														;; FF:FF:FF:FF:FF:FF means using source MAC of first packet coming from wired device===================================================================iwlist=================This is detailed explanation of each parameters for iwlist.-------------------------------------------------------------------------------------------------------iwlist ra0 scanning		; list the results after scanning(manual rescan)=======================================================================================================iwconfig=================The following are our support in standard configuration - iwconfig-------------------------------------------------------------------------------------------------------iwconfig ra0 essid {NN|on|off}			; set essidiwconfig ra0 mode {managed|ad-hoc|...}  ; set wireless mode>> rt2860sta driver support monitor mode with linux kernel > 2.4.20.>> Note: For using monitor mode => if mesh interface is ON, please down the mesh interface first.iwconfig ra0 freq N.NNNN[k|M|G]]		; set frequencyiwconfig ra0 channel N					; set channeliwconfig ra0 ap {N|off|auto}			; set AP addressiwconfig ra0 nick N						; set nicknameiwconfig ra0 rate {N|auto|fixed}     	; set rateiwconfig ra0 rts {N|auto|fixed|off}		; set RTS thresholdiwconfig ra0 frag {N|auto|fixed|off}	; set Fragment thresholdiwconfig ra0 enc {NNNN-NNNN|off}		; set encryption typeiwconfig ra0 power {period N|timeout N}	; set power management modes*** Wireless extension usage please refer to man page of 'iwconfig', 'iwlist' and 'iwpriv'. ***