VERSION    = 00.60.00.1CVSVERSION = "$Experimental work Michel Xhaard && Reza Jelveh 03/02/2004"DEFINES    =#### The following flags enable experimental features.# By default, these are enabled for development versions of the driver, and# disabled for release versions.# Optional: Enable driver debuggingDEFINES   += -DSPCA50X_ENABLE_DEBUG# Optional: Enable direct register read/write for PAC207 development#DEFINES   += -DSPCA5XX_ENABLE_REGISTERPLAY#### The following flags enable features that aren't yet implemented, and# therefore are disabled by default.# Optional: Enable compressionDEFINES   += -DSPCA50X_ENABLE_COMPRESSION#### Rest of Makefile follows here. You probably won't need to touch this.# Setup definesDEFINES   += -DCONFIG_USB_SPCA5XX_MODULE=1 -DMODULE -D__KERNEL__DEFINES   += -DVID_HARDWARE_SPCA5XX=0xFF -DSPCA5XX_VERSION=\"$(VERSION)\"ifneq ($(shell uname -r | cut -d. -f1,2), 2.4)ifneq ($(KERNELRELEASE),)   # We were called by kbuildCFLAGS += $(DEFINES) obj-m += spca5xx.ospca5xx-objs := drivers/usb/spca5xx.o drivers/usb/spcadecoder.o else   # We were called from command lineKERNEL_VERSION = `uname -r`KERNELDIR := /lib/modules/$(KERNEL_VERSION)/buildPWD  := $(shell pwd)MODULE_INSTALLDIR = /lib/modules/$(KERNEL_VERSION)/kernel/drivers/usb/media/# Targets, don't change!default:	@echo '   Building SPCA5XX driver for 2.5/2.6 kernel.'	@echo '   Remember: you must have read/write access to your kernel source tree.'	$(MAKE) -C $(KERNELDIR) SUBDIRS=$(PWD) CC=$(CC) modulesinstall:	mkdir -p $(MODULE_INSTALLDIR)	rm -f $(MODULE_INSTALLDIR)spca50x.ko	rm -f $(MODULE_INSTALLDIR)et61x.ko	install -c -m 0644 spca5xx.ko $(MODULE_INSTALLDIR)	/sbin/depmod -aeuninstall:	rm -f $(MODULE_INSTALLDIR)/spca5xx.ko	/sbin/depmod -aqendifelse   # kernel version test############################################################################## For Linux 2.4 users.# Change the following lines according to your system configuration.# It is important to configure your particular source tree ("make dep") before# compiling this module!################################################################################# This makefile will build the spca50x driver module external to the kernel# source tree. It makes it easier to swap kernels.KERNEL_VERSION = `uname -r`#### Location of the header files (most importantly the config files)# for the kernel you want to build the module against.# This should be correct for the currently installed kernel on your machine.KINCLUDE   = /lib/modules/$(KERNEL_VERSION)/build/includeKERNEL_ACFILE = $(KINCLUDE)/linux/autoconf.hKERNEL_MODVERSIONSFILE = $(KINCLUDE)/linux/modversions.hMODULE_INSTALLDIR = /lib/modules/$(KERNEL_VERSION)/kernel/drivers/usb/# Detect module versioning supportifneq ($(strip $(shell grep 'define CONFIG_MODVERSIONS 1' $(KERNEL_ACFILE))),)	DEFINES += -DMODVERSIONS -include $(KERNEL_MODVERSIONSFILE)endif# Detect SMP supportifneq ($(strip $(shell grep 'define CONFIG_SMP 1' $(KERNEL_ACFILE))),)	DEFINES += -D__SMP__ -DSMPendif# Setup the toolsCC         = gccLD         = ld# Setup compiler warningsWARNINGS   = -Wall -Wpointer-arithWARNINGS  += -Wcast-align -Wwrite-strings -Wstrict-prototypesWARNINGS  += -Wuninitialized -Wreturn-type -Wunused -Wparentheses# Setup compiler flagsCFLAGS     = -O2 -fomit-frame-pointer -fno-strict-aliasing -pipeCFLAGS    += -mpreferred-stack-boundary=2 CFLAGS    += -I$(KINCLUDE) -Idrivers/usb# Setup link flagsLDFLAGS    = --strip-debug -r# Setup the list of files to be included in a distributionDIST_FILES = CHANGELOG \             README \             Makefile \             drivers/usb/Config.in \             drivers/usb/spcadecoder.c \             drivers/usb/spcadecoder.h \	     drivers/usb/spcagamma.h \	     drivers/usb/spcaCompat.h \	     drivers/usb/spcausb.h \             drivers/usb/spca500_init.h \             drivers/usb/spca501_init.h \	     drivers/usb/sp5xxfw2.dat \             drivers/usb/sp5xxfw2.h \             drivers/usb/spca505_init.h \             drivers/usb/spca506.h \             drivers/usb/spca508_init.h \	     drivers/usb/spca561.h \	     drivers/usb/sonix.h \             drivers/usb/cs2102.h \             drivers/usb/hv7131b.h \	     drivers/usb/icm105a.h \             drivers/usb/hv7131c.h \	     drivers/usb/hdcs2020.h \             drivers/usb/pb0330.h \	     drivers/usb/tas5130c.h \	     drivers/usb/zc3xx.h\	     drivers/usb/tv8532.h\	     drivers/usb/cxlib.h\	     drivers/usb/sn9cxxx.h\	     drivers/usb/cx11646.h\	     drivers/usb/pac207.h\	     drivers/usb/spca5xx.c \             drivers/usb/spca5xx.h OBJS       = drivers/usb/spcadecoder.o \             drivers/usb/spca5xx.oBINARY     = spca5xx.o#### Targets follow herebinary:	$(OBJS)	@echo Linking $(BINARY)	@$(LD) $(LDFLAGS) -o $(BINARY) $(OBJS)install: binary	@echo Installing.. Your root password may be required.	su -c "make install-root"install-root:	@echo Installing..	@mkdir -p /lib/modules/`uname -r`/kernel/drivers/usb	@rm -f /lib/modules/`uname -r`/kernel/drivers/usb/spca50x.o	@rm -f /lib/modules/`uname -r`/kernel/drivers/usb/et61x.o	@cp spca5xx.o /lib/modules/`uname -r`/kernel/drivers/usb/spca5xx.o	@/sbin/depmoddist:	clean binary	@echo Making distributable archives	@rm -f spca5xx-src-$(VERSION).tar.gz	@tar zcf spca5xx-src-$(VERSION).tar.gz $(DIST_FILES)	@rm -f spca5xx-module-$(VERSION).tar.gz	@cp $(BINARY) spca5xx-$(VERSION).o	@tar zcf spca5xx-module-$(VERSION).tar.gz spca5xx-$(VERSION).o README	@rm spca5xx-$(VERSION).o.c.o:	Makefile $*.c	@echo Compiling $*.c	@$(CC) $(CFLAGS) $(WARNINGS) $(DEFINES) -c $*.c -o $*.o#### Dependencies follow heredrivers/usb/spca5xx.o: drivers/usb/spca5xx.h \		       drivers/usb/spcaCompat.h \		       drivers/usb/spcausb.h \		       drivers/usb/sonix.h \                       drivers/usb/spca500_init.h \                       drivers/usb/spca501_init.h \		       drivers/usb/sp5xxfw2.h \                       drivers/usb/spca505_init.h \		       drivers/usb/spca506.h \                       drivers/usb/spca508_init.h \		       drivers/usb/spca561.h \		       drivers/usb/zc3xx.h\		       drivers/usb/tv8532.h\		       drivers/usb/cx11646.h\		       drivers/usb/mr97311.h\		       drivers/usb/sn9cxxx.h\		       drivers/usb/pac207.h\                       drivers/usb/spcadecoder.o: drivers/usb/spcadecoder.h \			   drivers/usb/spcagamma.h \                          endif  # End kernel version test############################################################################## # OTHER TARGETS ##############################################################################clean:	rm -r -f drivers/usb/*.o drivers/usb/.spcadecoder.o.cmd \	drivers/usb/.spca5xx.o.cmd  *.o *.ko *.mod.* .[a-z]* core *.i	##############################################################################