// $Id: ZC4620i.lkr,v 1.1 2005/12/09 20:22:21 ottenk Exp $
// File: 18f4620i.lkr
// Sample ICD2 linker script for the PIC18F4620 processor

// This linker script has been modified for use with a
// ZigBee Coordinator or Router project.

LIBPATH .

FILES c018i.o
FILES clib.lib
FILES p18f4620.lib

CODEPAGE   NAME=vectors    START=0x0            END=0x29           PROTECTED
CODEPAGE   NAME=page       START=0x2A           END=0xFDBF
CODEPAGE   NAME=debug      START=0xFDC0         END=0xFFFF         PROTECTED
CODEPAGE   NAME=idlocs     START=0x200000       END=0x200007       PROTECTED
CODEPAGE   NAME=config     START=0x300000       END=0x30000D       PROTECTED
CODEPAGE   NAME=devid      START=0x3FFFFE       END=0x3FFFFF       PROTECTED
CODEPAGE   NAME=eedata     START=0xF00000       END=0xF003FF       PROTECTED

ACCESSBANK NAME=accessram  START=0x0            END=0x7F
DATABANK   NAME=gpr0       START=0x80           END=0xFF

// start of Zigbee variables
DATABANK   NAME=RX_BUFFER       START=0x100          END=0x1FF			PROTECTED
//DATABANK   NAME=TX_BUFFER		START=0x180			END=0x1FF			PROTECTED
//DATABANK   NAME=gpr1       START=0x100          END=0x1FF

DATABANK   NAME=gpr2       START=0x200          END=0x2FF
DATABANK   NAME=gpr3       START=0x300          END=0x6FF			PROTECTED
//DATABANK   NAME=gpr4       START=0x400          END=0x4FF
//DATABANK   NAME=gpr5       START=0x500          END=0x5FF
//DATABANK   NAME=gpr6       START=0x600          END=0x6FF
DATABANK   NAME=gpr7       START=0x700          END=0x7FF
DATABANK   NAME=gpr8       START=0x800          END=0x8FF
DATABANK   NAME=gpr9       START=0x900          END=0x9FF
DATABANK   NAME=gpr10      START=0xA00          END=0xAFF
DATABANK   NAME=gpr11      START=0xB00          END=0xBFF
DATABANK   NAME=gpr12      START=0xC00          END=0xCFF
DATABANK   NAME=gpr13      START=0xD00          END=0xDFF		PROTECTED //used by the stack
DATABANK   NAME=gpr14      START=0xE00          END=0xEF3
DATABANK   NAME=dbgspr     START=0xEF4          END=0xEFF          PROTECTED
DATABANK   NAME=gpr15      START=0xF00          END=0xF7F
ACCESSBANK NAME=accesssfr  START=0xF80          END=0xFFF          PROTECTED

SECTION    NAME=CONFIG     ROM=config

// If the node state table requires two banks, we have to adjust the stack.
// NOTE - if the stack is over one bank, the project memory model must be adjusted.
STACK SIZE=0x100 RAM=gpr13