/**********************************************************************  The following code is derived, directly or indirectly, from the SystemC  source code Copyright (c) 1996-2008 by all Contributors.  All Rights reserved.  The contents of this file are subject to the restrictions and limitations  set forth in the SystemC Open Source License Version 3.0 (the "License");  You may not use this file except in compliance with such restrictions and  limitations. You may obtain instructions on how to receive a copy of the  License at http://www.systemc.org/. Software distributed by Contributors  under the License is distributed on an "AS IS" basis, WITHOUT WARRANTY OF  ANY KIND, either express or implied. See the License for the specific  language governing rights and limitations under the License. *********************************************************************///=====================================================================/// @file example_system_top.cpp///// @brief This class instantiates components that compose the TLM2 ///        example system. The same block diagram is  instantiated ///        for each version, but with different components////=====================================================================//  Authors://    Bill Bunton, ESLX//    Anna Keist, ESLX//    Charles Wilson, ESLX//    Jack Donovan, ESLX//=====================================================================#include "at_1_phase_top.h"           	// example system top header//=====================================================================///  @fn example_system_top::example_system_top/////  @details///    The construcor method calls the bind methods///    to connect the example components. ////=====================================================================example_system_top::example_system_top  ( sc_core::sc_module_name name             )  : sc_core::sc_module                      /// Init SC base    ( name                                     )  , m_bus                                   /// Init Simple Bus    ( "m_bus"                                  )  , m_at_target_1_phase_1                   /// Init intance 1 of AT target    ( "m_at_target_1_phase_1"               // module name    , 201                                   /// 1st Target ID is 201    , "memory_socket_1"                     // socket name    , 4*1024                                // memory size (bytes)    , 4                                     // memory width (bytes)    , sc_core::sc_time(10, sc_core::SC_NS)  // accept delay    , sc_core::sc_time(50, sc_core::SC_NS)  // read response delay    , sc_core::sc_time(30, sc_core::SC_NS)  // write response delay    )  , m_at_target_1_phase_2                   /// Init instance 2 of AT target    ( "m_at_target_1_phase_2"               // module name    , 202                                   /// 2nd Target ID is 202    , "memory_socket_1"                     // socket name    , 4*1024                                // memory size (bytes)    , 4                                     // memory width (bytes)    , sc_core::sc_time(10, sc_core::SC_NS)  // accept delay    , sc_core::sc_time(50, sc_core::SC_NS)  // read response delay    , sc_core::sc_time(30, sc_core::SC_NS)  // write response delay    )  , m_initiator_1                           /// Init Instance 1 of AT initiator    ( "m_initiator_1"                       // module name    , 101                                   /// 1st Initiator ID is 101    , 0x0000000000000100                    // fitst base address    , 0x0000000010000100                    // second base address    , 2                                     // active transactions    )  , m_initiator_2                           /// Init initiator 2    ( "m_initiator_2"                       // module name    , 102                                   /// 2nd Initiator ID is 102    , 0x0000000000000200                    // fitst base address    , 0x0000000010000200                    // second base address    , 2                                     // active transactions    ){  /// bind TLM2 initiators to TLM2 target sockets on SimpleBus  m_initiator_1.initiator_socket(m_bus.target_socket[0]);  m_initiator_2.initiator_socket(m_bus.target_socket[1]);  /// bind TLM2 targets to TLM2 initiator sockets on SimpleBus  m_bus.initiator_socket[0](m_at_target_1_phase_1.m_memory_socket);  m_bus.initiator_socket[1](m_at_target_1_phase_2.m_memory_socket);}