?? vivi usb.txt
字號:
#define oSRCPND 0x00
#define oINTMOD 0x04
#define oINTMSK 0x08
#define oPRIORITY 0x0a
#define oINTPND 0x10
#define oINTOFFSET 0x14
#define oSUBSRCPND 0x18
#define oINTSUBMSK 0x1C
/* Registers */
#define SRCPND bINT_CTL(oSRCPND)
#define INTMOD bINT_CTL(oINTMOD)
#define INTMSK bINT_CTL(oINTMSK)
#define PRIORITY bINT_CTL(oPRIORITY)
#define INTPND bINT_CTL(oINTPND)
#define INTOFFSET bINT_CTL(oINTOFFSET)
#define SUBSRCPND bINT_CTL(oSUBSRCPND)
#define INTSUBMSK bINT_CTL(oINTSUBMSK)
#define INT_ADCTC (1 << 31) /* ADC EOC interrupt */
#define INT_RTC (1 << 30) /* RTC alarm interrupt */
#define INT_SPI1 (1 << 29) /* UART1 transmit interrupt */
#define INT_UART0 (1 << 28) /* UART0 transmit interrupt */
#define INT_IIC (1 << 27) /* IIC interrupt */
#define INT_USBH (1 << 26) /* USB host interrupt */
#define INT_USBD (1 << 25) /* USB device interrupt */
#define INT_RESERVED24 (1 << 24)
#define INT_UART1 (1 << 23) /* UART1 receive interrupt */
#define INT_SPI0 (1 << 22) /* SPI interrupt */
#define INT_MMC (1 << 21) /* MMC interrupt */
#define INT_DMA3 (1 << 20) /* DMA channel 3 interrupt */
#define INT_DMA2 (1 << 19) /* DMA channel 2 interrupt */
#define INT_DMA1 (1 << 18) /* DMA channel 1 interrupt */
#define INT_DMA0 (1 << 17) /* DMA channel 0 interrupt */
#define INT_LCD (1 << 16) /* reserved for future use */
#define INT_UART2 (1 << 15) /* UART 2 interrupt */
#define INT_TIMER4 (1 << 14) /* Timer 4 interrupt */
#define INT_TIMER3 (1 << 13) /* Timer 3 interrupt */
#define INT_TIMER2 (1 << 12) /* Timer 2 interrupt */
#define INT_TIMER1 (1 << 11) /* Timer 1 interrupt */
#define INT_TIMER0 (1 << 10) /* Timer 0 interrupt */
#define INT_WDT (1 << 9) /* Watch-Dog timer interrupt */
#define INT_TICK (1 << 8) /* RTC time tick interrupt */
#define INT_BAT_FLT (1 << 7)
#define INT_RESERVED6 (1 << 6) /* Reserved for future use */
#define INT_EINT8_23 (1 << 5) /* External interrupt 8 ~ 23 */
#define INT_EINT4_7 (1 << 4) /* External interrupt 4 ~ 7 */
#define INT_EINT3 (1 << 3) /* External interrupt 3 */
#define INT_EINT2 (1 << 2) /* External interrupt 2 */
#define INT_EINT1 (1 << 1) /* External interrupt 1 */
#define INT_EINT0 (1 << 0) /* External interrupt 0 */
#define INT_ADC (1 << 10)
#define INT_TC (1 << 9)
#define INT_ERR2 (1 << 8)
#define INT_TXD2 (1 << 7)
#define INT_RXD2 (1 << 6)
#define INT_ERR1 (1 << 5)
#define INT_TXD1 (1 << 4)
#define INT_RXD1 (1 << 3)
#define INT_ERR0 (1 << 2)
#define INT_TXD0 (1 << 1)
#define INT_RXD0 (1 << 0)
/* NAND Flash Controller */
#define NAND_CTL_BASE 0x4E000000
#define bINT_CTL(Nb) __REG(INT_CTL_BASE + (Nb))
/* Offset */
#define oNFCONF 0x00
#define oNFCMD 0x04
#define oNFADDR 0x08
#define oNFDATA 0x0c
#define oNFSTAT 0x10
#define oNFECC 0x14
/* PWM Timer */
#define bPWM_TIMER(Nb) __REG(0x51000000 + (Nb))
#define bPWM_BUFn(Nb,x) bPWM_TIMER(0x0c + (Nb)*0x0c + (x))
/* Registers */
#define TCFG0 bPWM_TIMER(0x00)
#define TCFG1 bPWM_TIMER(0x04)
#define TCON bPWM_TIMER(0x08)
#define TCNTB0 bPWM_BUFn(0,0x0)
#define TCMPB0 bPWM_BUFn(0,0x4)
#define TCNTO0 bPWM_BUFn(0,0x8)
#define TCNTB1 bPWM_BUFn(1,0x0)
#define TCMPB1 bPWM_BUFn(1,0x4)
#define TCNTO1 bPWM_BUFn(1,0x8)
#define TCNTB2 bPWM_BUFn(2,0x0)
#define TCMPB2 bPWM_BUFn(2,0x4)
#define TCNTO2 bPWM_BUFn(2,0x8)
#define TCNTB3 bPWM_BUFn(3,0x0)
#define TCMPB3 bPWM_BUFn(3,0x4)
#define TCNTO3 bPWM_BUFn(3,0x8)
#define TCNTB4 bPWM_BUFn(4,0x0)
#define TCNTO4 bPWM_BUFn(4,0x4)
/* Fields */
#define fTCFG0_DZONE Fld(8,16) /* the dead zone length (= timer 0) */
#define fTCFG0_PRE1 Fld(8,8) /* prescaler value for time 2,3,4 */
#define fTCFG0_PRE0 Fld(8,0) /* prescaler value for time 0,1 */
#define fTCFG1_MUX4 Fld(4,16)
/* bits */
#define TCFG0_DZONE(x) FInsrt((x), fTCFG0_DZONE)
#define TCFG0_PRE1(x) FInsrt((x), fTCFG0_PRE1)
#define TCFG0_PRE0(x) FInsrt((x), fTCFG0_PRE0)
#define TCON_4_AUTO (1 << 22) /* auto reload on/off for Timer 4 */
#define TCON_4_UPDATE (1 << 21) /* manual Update TCNTB4 */
#define TCON_4_ONOFF (1 << 20) /* 0: Stop, 1: start Timer 4 */
#define COUNT_4_ON (TCON_4_ONOFF*1)
#define COUNT_4_OFF (TCON_4_ONOFF*0)
#define TCON_3_AUTO (1 << 19) /* auto reload on/off for Timer 3 */
#define TIMER3_ATLOAD_ON (TCON_3_AUTO*1)
#define TIMER3_ATLAOD_OFF FClrBit(TCON, TCON_3_AUTO)
#define TCON_3_INVERT (1 << 18) /* 1: Inverter on for TOUT3 */
#define TIMER3_IVT_ON (TCON_3_INVERT*1)
#define TIMER3_IVT_OFF (FClrBit(TCON, TCON_3_INVERT))
#define TCON_3_MAN (1 << 17) /* manual Update TCNTB3,TCMPB3 */
#define TIMER3_MANUP (TCON_3_MAN*1)
#define TIMER3_NOP (FClrBit(TCON, TCON_3_MAN))
#define TCON_3_ONOFF (1 << 16) /* 0: Stop, 1: start Timer 3 */
#define TIMER3_ON (TCON_3_ONOFF*1)
#define TIMER3_OFF (FClrBit(TCON, TCON_3_ONOFF))
/* macros */
#define GET_PRESCALE_TIMER4(x) FExtr((x), fTCFG0_PRE1)
#define GET_DIVIDER_TIMER4(x) FExtr((x), fTCFG1_MUX4)
/*
* NAND Flash Controller (Page 6-1 ~ 6-8)
*
* Register
NFCONF NAND Flash Configuration [word, R/W, 0x00000000]
NFCMD NAND Flash Command Set [word, R/W, 0x00000000]
NFADDR NAND Flash Address Set [word, R/W, 0x00000000]
NFDATA NAND Flash Data [word, R/W, 0x00000000]
NFSTAT NAND Flash Status [word, R, 0x00000000]
NFECC NAND Flash ECC [3 bytes, R, 0x00000000]
*
*/
#define bNAND_CTL(Nb) __REG(0x4e000000 + (Nb))
#define NFCONF bNAND_CTL(0x00)
#define NFCMD bNAND_CTL(0x04)
#define NFADDR bNAND_CTL(0x08)
#define NFDATA bNAND_CTL(0x0c)
#define NFSTAT bNAND_CTL(0x10)
#define NFECC bNAND_CTL(0x14)
#define fNFCONF_TWRPH1 Fld(3,0)
#define NFCONF_TWRPH1 FMsk(fNFCONF_TWRPH1)
#define NFCONF_TWRPH1_0 FInsrt(0x2, fNFCONF_TWRPH1) /* 2 */
#define fNFCONF_TWRPH0 Fld(3,4)
#define NFCONF_TWRPH0 FMsk(fNFCONF_TWRPH0)
#define NFCONF_TWRPH0_3 FInsrt(0x4, fNFCONF_TWRPH0) /* 4 */
#define fNFCONF_TACLS Fld(3,8)
#define NFCONF_TACLS FMsk(fNFCONF_TACLS)
#define NFCONF_TACLS_0 FInsrt(0x0, fNFCONF_TACLS) /* 1 */
#define fNFCONF_nFCE Fld(1,11)
#define NFCONF_nFCE FMsk(fNFCONF_nFCE)
#define NFCONF_nFCE_LOW FInsrt(0x0, fNFCONF_nFCE) /* active */
#define NFCONF_nFCE_HIGH FInsrt(0x1, fNFCONF_nFCE) /* inactive */
#define fNFCONF_ECC Fld(1,12)
#define NFCONF_ECC FMsk(fNFCONF_ECC)
#define NFCONF_ECC_NINIT FInsrt(0x0, fNFCONF_ECC) /* not initialize */
#define NFCONF_ECC_INIT FInsrt(0x1, fNFCONF_ECC) /* initialize */
#define fNFCONF_ADDRSTEP Fld(1,13) /* Addressing Step */
#define NFCONF_ADDRSTEP FMsk(fNFCONF_ADDRSTEP)
#define fNFCONF_PAGESIZE Fld(1,14)
#define NFCONF_PAGESIZE FMsk(fNFCONF_PAGESIZE)
#define NFCONF_PAGESIZE_256 FInsrt(0x0, fNFCONF_PAGESIZE) /* 256 bytes */
#define NFCONF_PAGESIZE_512 FInsrt(0x1, fNFCONF_PAGESIZE) /* 512 bytes */
#define fNFCONF_FCTRL Fld(1,15) /* Flash controller enable/disable */
#define NFCONF_FCTRL FMsk(fNFCONF_FCTRL)
#define NFCONF_FCTRL_DIS FInsrt(0x0, fNFCONF_FCTRL) /* Disable */
#define NFCONF_FCTRL_EN FInsrt(0x1, fNFCONF_FCTRL) /* Enable */
#define NFSTAT_RnB (1 << 0)
#define NFSTAT_nFWE (1 << 8)
#define NFSTAT_nFRE (1 << 9)
#define NFSTAT_ALE (1 << 10)
#define NFSTAT_CLE (1 << 11)
#define NFSTAT_AUTOBOOT (1 << 15)
/*
* Power Management
*/
#define SPI_CLK (1 << 18)
#define IIS_CLK (1 << 17)
#define IIC_CLK (1 << 16
#define ADC_CLK (1 << 15)
#define RTC_CLK (1 << 14)
#define GPIO_CLK (1 << 13)
#define UART2_CLK (1 << 12)
#define UART1_CLK (1 << 11)
#define UART0_CLK (1 << 10)
#define SDI_CLK (1 << 9)
#define PWM_CLK (1 << 8)
#define USBSLAVE_CLK (1 << 7)
#define USBHOST_CLK (1 << 6)
#define LCDC_CLK (1 << 5)
#define NANDCTL_CLK (1 << 4)
#define SLEEP_ON (1 << 3)
#define IDLE (1 << 2)
#define GSTATUS(Nb) __REG(0x560000AC + (Nb*4))
#define GSTATUS0 GSTATUS(0)
#define GSTATUS1 GSTATUS(1)
#define GSTATUS2 GSTATUS(2)
#define GSTATUS3 GSTATUS(3)
#define GSTATUS4 GSTATUS(4)
#define PMST GSTATUS2
#define PMSR0 GSTATUS3
#define PMSR1 GSTATUS4
#define PMCTL0 CLKCON
#define PMCTL1 MISCCR
#define SCLKE (1 << 19)
#define SCLK1 (1 << 18)
#define SCLK0 (1 << 17)
#define USBSPD1 (1 << 13)
#define USBSPD0 (1 << 12)
#define PMST_HWR (1 << 0)
#define PMST_SMR (1 << 1)
#define PMST_WDR (1 << 2)
/*
* Watch-dog tiemr
*/
#define WTCON __REG(0x53000000)
#define WTDAT __REG(0x53000004)
#define WTCNT __REG(0x53000008)?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -