//-----------------------------------------------------------------------------
// F34x_MSD_F34x_Temp_Sensor.c
//-----------------------------------------------------------------------------
// Copyright 2007 Silicon Laboratories, Inc.
// http://www.silabs.com
//
// Program Description:
//
// This file contains the functions used by the USB MSD to check if USB cable
// is switched on. If so UART transmision is stopped
//
// How To Test:    See Readme.txt
//
//
// FID:            34X000069
// Target:         C8051F34x
// Tool chain:     Keil
// Command Line:   See Readme.txt
// Project Name:   F34x_USB_MSD
//
// Release 1.2
//    -All changes by BD and PD
//    -5 OCT 2007
//    -No changes; incremented revision number to match project revision
//
// Release 1.1
//    -All changes by PKC
//    -09 JUN 2006
//    -Replaced SFR definitions file "c8051f320.h" with "c8051f340.h"
//
// Release 1.0
//    -Initial Release
//

//-----------------------------------------------------------------------------
// Includes
//-----------------------------------------------------------------------------

#include "F34x_MSD_Definitions.h"
#include "c8051f340.h"
#include "F34x_MSD_VBUS_Functions.h"
#include "F34x_MSD_File_System.h"
#include "F34x_MSD_Cmd.h"
#include "F34x_MSD_Log.h"
#include "F34x_MSD_Temp_Sensor.h"
#include <stdio.h>


//-----------------------------------------------------------------------------
// Function Prototypes
//-----------------------------------------------------------------------------

//-----------------------------------------------------------------------------
// Switch_On_Off_UART
//-----------------------------------------------------------------------------
//
// This function checks if USB connection is set (USB cable is switched on)
// If so UART transmision is disabled
//-----------------------------------------------------------------------------

void Switch_On_Off_UART()
{
	static unsigned uart_disabled = 0;
	if(REG0CN & 0x40)
	{
		if(!uart_disabled)
		{
			uart_disabled = 1;
			Temp_Sensor_Stop_Logging();
			Stop_Logging();
			printf(ENDLINE"USB ACTIVE"ENDLINE"UART DISABLED"ENDLINE);
			REN0 = 0;
		}
	}
	else
	{
		if(uart_disabled)
		{
			uart_disabled = 0;
			printf(ENDLINE"USB INACTIVE"ENDLINE"UART ENABLED"ENDLINE);
			write_current_dir();
		    putchar(PROMPT);
			REN0 = 1;
		}
	}
}


//-----------------------------------------------------------------------------
// End Of File
//-----------------------------------------------------------------------------