/*  isp.h - part of USBasp  Autor..........: Thomas Fischl <tfischl@gmx.de>   Description....: Provides functions for communication/programming                   over ISP interface  Licence........: GNU GPL v2 (see Readme.txt)  Creation Date..: 2005-02-23  Last change....: 2007-07-23*/#ifndef __isp_h_included__#define	__isp_h_included__#ifndef uchar#define	uchar	unsigned char#endif#define	ISP_OUT   PORTB#define ISP_IN    PINB#define ISP_DDR   DDRB#define ISP_RST   PB2#define ISP_MOSI  PB3#define ISP_MISO  PB4#define ISP_SCK   PB5#define ISP_DELAY 1#define ISP_SCK_SLOW 0#define ISP_SCK_FAST 1/* Prepare connection to target device */void ispConnect(void);/* Close connection to target device */void ispDisconnect(void);/* read an write a byte from isp using software (slow) */uchar ispTransmit_sw(uchar send_byte);/* read an write a byte from isp using hardware (fast) */uchar ispTransmit_hw(uchar send_byte);/* enter programming mode */uchar ispEnterProgrammingMode(void);/* read byte from eeprom at given address */uchar ispReadEEPROM(unsigned int address);/* write byte to flash at given address */uchar ispWriteFlash(unsigned long address, uchar data, uchar pollmode);uchar ispFlushPage(unsigned long address, uchar pollvalue);/* read byte from flash at given address */uchar ispReadFlash(unsigned long address);/* write byte to eeprom at given address */uchar ispWriteEEPROM(unsigned int address, uchar data);/* pointer to sw or hw transmit function */uchar (*ispTransmit)(uchar);/* set SCK speed. call before ispConnect! */void ispSetSCKOption(uchar sckoption);#endif /* __isp_h_included__ */