?? startup.s
字號:
/***********************************************************************/
/* This file is part of the CA ARM C Compiler package */
/* Copyright KEIL ELEKTRONIK GmbH 2002-2005 */
/***********************************************************************/
/* */
/* STARTUP.S: Startup file for ADI ADuC702x device series */
/* */
/***********************************************************************/
/*
//*** <<< Use Configuration Wizard in Context Menu >>> ***
*/
/*
* The STARTUP.S code is executed after CPU Reset. This file may be
* translated with the following SET symbols. In uVision these SET
* symbols are entered under Options - ASM - Set.
*
* RAM_INTVEC: when set the startup code copies exception vectors
* from on-chip Flash to on-chip RAM and remaps RAM to address 0.
*/
// Standard definitions of Mode bits and Interrupt (I & F) flags in PSRs
Mode_USR EQU 0x10
Mode_FIQ EQU 0x11
Mode_IRQ EQU 0x12
Mode_SVC EQU 0x13
Mode_ABT EQU 0x17
Mode_UND EQU 0x1B
Mode_SYS EQU 0x1F
I_Bit EQU 0x80 /* when I bit is set, IRQ is disabled */
F_Bit EQU 0x40 /* when F bit is set, FIQ is disabled */
/*
// <h> Stack Configuration (Stack Sizes in Bytes)
// <o0> Undefined Mode <0x0-0xFFFFFFFF:4>
// <o1> Supervisor Mode <0x0-0xFFFFFFFF:4>
// <o2> Abort Mode <0x0-0xFFFFFFFF:4>
// <o3> Fast Interrupt Mode <0x0-0xFFFFFFFF:4>
// <o4> Interrupt Mode <0x0-0xFFFFFFFF:4>
// <o5> User/System Mode <0x0-0xFFFFFFFF:4>
// </h>
*/
UND_Stack_Size EQU 0x00000004
SVC_Stack_Size EQU 0x00000004
ABT_Stack_Size EQU 0x00000004
FIQ_Stack_Size EQU 0x00000004
IRQ_Stack_Size EQU 0x00000080
USR_Stack_Size EQU 0x00000400
AREA STACK, DATA, READWRITE, ALIGN=2
DS (USR_Stack_Size+3)&~3 ; Stack for User/System Mode
DS (SVC_Stack_Size+3)&~3 ; Stack for Supervisor Mode
DS (IRQ_Stack_Size+3)&~3 ; Stack for Interrupt Mode
DS (FIQ_Stack_Size+3)&~3 ; Stack for Fast Interrupt Mode
DS (ABT_Stack_Size+3)&~3 ; Stack for Abort Mode
DS (UND_Stack_Size+3)&~3 ; Stack for Undefined Mode
Top_Stack:
// MMR definitions
MMR_BASE EQU 0xFFFF0000 ; MMR Base Address
REMAP_OFFSET EQU 0x0220
PREMAP_OFFSET EQU 0x0224
POWKEY1_OFFSET EQU 0x0404
POWCON_OFFSET EQU 0x0408
POWKEY2_OFFSET EQU 0x040C
// <e> PLL Setup
// <o1.0..2> CD: CPU Clock Divider
// <0-7>
// <i> CD Value Selection
// <i> Clock Divider = 2^CD
// <o1.3> FINT: Fast Interrupt
// <0-1>
// <i> Switches to CD0 for FIQ
// </e>
PLL_SETUP EQU 1
PLLCFG_Val EQU 0x00000001
// <e> Pin Setup
GPIO_SETUP EQU 0
GPIOBASE EQU 0xFFFFF400
// <h> Port 0
// <o.0..1> P0.0 <0=> GPIO <1=> CMPOUT <2=> MS2 <3=> PLAI[7]
// <o.4..5> P0.1 <0=> GPIO <1=> PWM2H <2=> BLE <3=> ---
// <o.8..9> P0.2 <0=> GPIO <1=> PWM2L <2=> BHE <3=> ---
// <o.12..13> P0.3 <0=> GPIO <1=> TRST <2=> A16 <3=> ADCBUSY
// <o.16..17> P0.4 <0=> GPIO/IRQ0 <1=> PWMTRIP <2=> MS1 <3=> PLAO[1]
// <o.20..21> P0.5 <0=> GPIO/IRQ1 <1=> ADCBUSY <2=> MS0 <3=> PLAO[2]
// <o.24..25> P0.6 <0=> GPIO/T1 <1=> MRST <2=> AE <3=> PLAO[3]
// <o.28..29> P0.7 <0=> GPIO <1=> ECLK/XCLK <2=> SIN <3=> PLAO[4]
// </h>
GP0CON_Val EQU 0x00000000
// <h> Port 1
// <o.0..1> P1.0 <0=> GPIO/T1 <1=> SIN <2=> I2C0SCL <3=> PLAI[0]
// <o.4..5> P1.1 <0=> GPIO <1=> SOUT <2=> I2C0SDA <3=> PLAI[1]
// <o.8..9> P1.2 <0=> GPIO <1=> RTS <2=> I2C1SCL <3=> PLAI[2]
// <o.12..13> P1.3 <0=> GPIO <1=> CTS <2=> I2C1SDA <3=> PLAI[3]
// <o.16..17> P1.4 <0=> GPIO/IRQ2 <1=> RI <2=> SPICLK <3=> PLAI[4]
// <o.20..21> P1.5 <0=> GPIO/IRQ3 <1=> DCD <2=> SPIMISO <3=> PLAI[5]
// <o.24..25> P1.6 <0=> GPIO <1=> DSR <2=> SPIMOSI <3=> PLAI[6]
// <o.28..29> P1.7 <0=> GPIO <1=> DTR <2=> SPICSL <3=> PLAO[0]
// </h>
GP1CON_Val EQU 0x00000000
// <h> Port 2
// <o.0..1> P2.0 <0=> GPIO <1=> CONVSTART <2=> SOUT <3=> PLAO[5]
// <o.4..5> P2.1 <0=> GPIO <1=> PWM0H <2=> WS <3=> PLAO[6]
// <o.8..9> P2.2 <0=> GPIO <1=> PWM0L <2=> RS <3=> PLAO[7]
// <o.12..13> P2.3 <0=> GPIO <1=> --- <2=> AE <3=> ---
// <o.16..17> P2.4 <0=> GPIO <1=> PWM0H <2=> MS0 <3=> ---
// <o.20..21> P2.5 <0=> GPIO <1=> PWM0L <2=> MS1 <3=> ---
// <o.24..25> P2.6 <0=> GPIO <1=> PWM1H <2=> MS2 <3=> ---
// <o.28..29> P2.7 <0=> GPIO <1=> PWM1L <2=> MS3 <3=> ---
// </h>
GP2CON_Val EQU 0x00000000
// <h> Port 3
// <o.0..1> P3.0 <0=> GPIO <1=> PWM0H <2=> AD0 <3=> PLAI[8]
// <o.4..5> P3.1 <0=> GPIO <1=> PWM0L <2=> AD1 <3=> PLAI[9]
// <o.8..9> P3.2 <0=> GPIO <1=> PWM1H <2=> AD2 <3=> PLAI[10]
// <o.12..13> P3.3 <0=> GPIO <1=> PWM1L <2=> AD3 <3=> PLAI[11]
// <o.16..17> P3.4 <0=> GPIO <1=> PWM2H <2=> AD4 <3=> PLAI[12]
// <o.20..21> P3.5 <0=> GPIO <1=> PWM2L <2=> AD5 <3=> PLAI[13]
// <o.24..25> P3.6 <0=> GPIO <1=> PWMTRIP <2=> AD6 <3=> PLAI[14]
// <o.28..29> P3.7 <0=> GPIO <1=> PWMSYNC <2=> AD7 <3=> PLAI[15]
// </h>
GP3CON_Val EQU 0x00000000
// <h> Port 4
// <o.0..1> P4.0 <0=> GPIO <1=> --- <2=> AD8 <3=> PLAO[8]
// <o.4..5> P4.1 <0=> GPIO <1=> --- <2=> AD9 <3=> PLAO[9]
// <o.8..9> P4.2 <0=> GPIO <1=> --- <2=> AD10 <3=> PLAO[10]
// <o.12..13> P4.3 <0=> GPIO <1=> --- <2=> AD11 <3=> PLAO[11]
// <o.16..17> P4.4 <0=> GPIO <1=> --- <2=> AD12 <3=> PLAO[12]
// <o.20..21> P4.5 <0=> GPIO <1=> --- <2=> AD13 <3=> PLAO[13]
// <o.24..25> P4.6 <0=> GPIO <1=> --- <2=> AD14 <3=> PLAO[14]
// <o.28..29> P4.7 <0=> GPIO <1=> --- <2=> AD15 <3=> PLAO[15]
// </h>
GP4CON_Val EQU 0x00000000
// </e>
// <e> External Memory Interface
XM_SETUP EQU 0
XMBASE EQU 0xFFFFF000
// <e.0> Enable Memory Region 0
// <o.1> Data Bus Width <0=> 8-bit <1=> 16-bit
// <o1.11> Byte Address Mode Forced
// <o1.15> Byte Enabled Write Strobe
// <o1.10> Disable extra Address Latch Hold Cycle
// <o1.8> Disable extra Write Address Hold Cycle
// <o1.9> Disable Read Bus Turn Cycle
// <o1.12..14> Address Wait States <0-7>
// <i> Number of Wait States added for AE
// <o1.0..3> Read Wait States <0-15>
// <i> Number of Wait States added for RS
// <o1.4..7> Write Wait States <0-15>
// <i> Number of Wait States added for WS
// </e>
XM0CON_Val EQU 0x00000000
XM0PAR_Val EQU 0x000070FF
// <e.0> Enable Memory Region 1
// <o.1> Data Bus Width <0=> 8-bit <1=> 16-bit
// <o1.11> Byte Address Mode Forced
// <o1.15> Byte Enabled Write Strobe
// <o1.10> Disable extra Address Latch Hold Cycle
// <o1.8> Disable extra Write Address Hold Cycle
// <o1.9> Disable Read Bus Turn Cycle
// <o1.12..14> Address Wait States <0-7>
// <i> Number of Wait States added for AE
// <o1.0..3> Read Wait States <0-15>
// <i> Number of Wait States added for RS
// <o1.4..7> Write Wait States <0-15>
// <i> Number of Wait States added for WS
// </e>
XM1CON_Val EQU 0x00000000
XM1PAR_Val EQU 0x000070FF
// <e.0> Enable Memory Region 2
// <o.1> Data Bus Width <0=> 8-bit <1=> 16-bit
// <o1.11> Byte Address Mode Forced
// <o1.15> Byte Enabled Write Strobe
// <o1.10> Disable extra Address Latch Hold Cycle
// <o1.8> Disable extra Write Address Hold Cycle
// <o1.9> Disable Read Bus Turn Cycle
// <o1.12..14> Address Wait States <0-7>
// <i> Number of Wait States added for AE
// <o1.0..3> Read Wait States <0-15>
// <i> Number of Wait States added for RS
// <o1.4..7> Write Wait States <0-15>
// <i> Number of Wait States added for WS
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -