/******************************************************************************
Filename:     app_ex_main.c
Target:       cc2430
Revised:      16/12-2005
Revision:     1.0

Description:
    Application example, SmartRF04EB.

******************************************************************************/


#include "app_ex.h"
#include "RF04EB.h"
#include "hal.h"
#include "sensormenu.h"
#include "lcd128_64.h"
#include "string.h"
#include "stdio.h"
#include "menu.h"
#include "app_ex_uart.h"
#include "guangming.h"
#include "temp.h"
#include "adc_voltage.h"
#include "potentiometer.h"

extern void addToSleepTimer(UINT16 sec);
extern void initPowerModes(void);


/******************************************************************************
* @fn  main
*
* @brief
*      Main function of application example.
*
* Parameters:
*
* @param  void
*
* @return void
*
******************************************************************************/
void main(void)
{
  SET_MAIN_CLOCK_SOURCE(CRYSTAL);
  keyinit();
  halWait(100);
  LCDInit();
  initUART();
  TurnOnDisp();
  while(1)
  {
    MenuMenuDisp();
  }
}

/******************************************************************************
* @fn  stopApplication
*
* @brief
*     Check for stop application command, Joystick direction left.
*
* Parameters:
*
* @param  void
*
* @return BOOL
*         TRUE    Terminate current application
*         FALSE   No action
*
******************************************************************************/
BOOL stopApplication(void)
{
   return (ScanKey() == K_CANCEL);
}


/******************************************************************************
* @fn  haltApplication
*
* @brief
*     Halts until user stops application.
*
* Parameters:
*
* @param  void
*
* @return void
*
******************************************************************************/
void haltApplication(void)
{
   while(!stopApplication());
}


/******************************************************************************
* @fn  haltApplicationWithLED
*
* @brief
*     Halts until user stops application, toggle LEDs
*
* Parameters:
*
* @param  void
*
* @return void
*
******************************************************************************/
void haltApplicationWithLED(void)
{
   BOOL direction = 0;
   BYTE led_values = 0x01;

   //INIT_YLED();

   while(!stopApplication()){
      YLED = !!((led_values & 0x01));

      if(direction == 0)
         (led_values < 0x08) ? (led_values <<= 1):(led_values = 0x08, direction = 1);
      else
         (led_values > 0x01) ? (led_values >>= 1):(led_values = 0x01, direction = 0);

      halWait(40);
   }
}



/*********************************************************************************
//函數名：INT8U ScanKey(void)
//輸入：無
//輸出：無
//功能描述：按鍵掃描
*********************************************************************************/
INT8U ScanKey(void)
{
	INT8U tt;
	if(KEY_OK == 0) return K_OK;
	if(KEY_OK == 0) return K_OK;
	if(KEY_OK == 0) return K_OK;
        if(KEY_CANCEL == 0) return K_CANCEL;
        if(KEY_CANCEL == 0) return K_CANCEL;
        if(KEY_CANCEL == 0) return K_CANCEL;
        else
        {
                tt = halAdcSampleSingle(ADC_REF_AVDD, ADC_8_BIT, ADC_INPUT_JOYSTICK);
                tt = halAdcSampleSingle(ADC_REF_AVDD, ADC_8_BIT, ADC_INPUT_JOYSTICK);
                if((tt > 0xA0 ) && (tt < 0xC5)) return K_UP;
                else if((tt < 0x9a) && (tt > 0x60)) return K_DOWN;
                else if((tt < 0x55) && (tt > 0x32)) return K_LIFT;
                else if(tt == 0) return K_RIGHT;
                else return 0xff;
        }
}


//APPLICATION apps[NBR_OF_APPS];
UINT8 activeApp;
INT8U LanguageSel = 0;
void keyinit(void)
{
	INIT_JOYSTICK();
	IO_DIR_PORT_PIN(2, 0, IO_IN);
	IO_DIR_PORT_PIN(0, 4, IO_IN);
	IO_DIR_PORT_PIN(0, 5, IO_IN);
}