/*----------------------------------------------------------------------------
 *      R T L  -  T C P N E T
 *----------------------------------------------------------------------------
 *      Name:    NET_CONFIG.C
 *      Purpose: Configuration of RTL TcpNet by user.
 *      Rev.:    V3.12
 *----------------------------------------------------------------------------
 *      This code is part of the RealView Run-Time Library.
 *      Copyright (c) 2004-2007 KEIL - An ARM Company. All rights reserved.
 *---------------------------------------------------------------------------*/

#include <Net_Config.h>

/*----------------------------------------------------------------------------
 *      RTL User configuration part BEGIN
 *---------------------------------------------------------------------------*/

//-------- <<< Use Configuration Wizard in Context Menu >>> -----------------
//
// <h>TcpNet System Definitions
// ============================
//
//   <s.15>LHOST_NAME: Local Host Name
//   <i> This is the name under which embedded host can be
//   <i> accessed in local area network.
//   <i> Default: "mcb2100"
#define LHOST_NAME     "stellaris"

//   <o>MEM_SIZE: Memory Pool size in bytes <1500-32000:4><#/4>
//   <i> This is the size of a memory pool used to allocate memory
//   <i> for the received and sending Ethernet packets. Increase
//   <i> the size when more TCP and UDP sockets are used.
//   <i> Default: 8000
#define MEM_SIZE       2048

//   <o>TICK_INTERVAL: Tick Timer interval <10=> 10 ms <20=> 20 ms <25=> 25 ms
//                         <40=> 40 ms <50=> 50 ms <100=> 100 ms <200=> 200 ms
//   <i> System Tick Timer interval for software timers
//   <i> Default: 100 ms
#define TICK_INTERVAL  100

// </h>
// <e>Ethernet Network Interface
// =============================
// <i> Enable or disable Ethernet Network Interface
#define ETH_ENABLE     1

//   <h>Local Ethernet Address
//   =========================
//
//     <o>MAC1: Address byte 1 <0x00-0xff>
//     <i> Default: 0x00
#define _MAC1          0x1E

//     <o>MAC2: Address byte 2 <0x00-0xff>
//     <i> Default: 0x30
#define _MAC2          0x30

//     <o>MAC3: Address byte 3 <0x00-0xff>
//     <i> Default: 0x6C
#define _MAC3          0x6C

//     <o>MAC4: Address byte 4 <0x00-0xff>
//     <i> Default: 0x00
#define _MAC4          0xA2

//     <o>MAC5: Address byte 5 <0x00-0xff>
//     <i> Default: 0x00
#define _MAC5          0x45

//     <o>MAC6: Address byte 6 <0x00-0xff>
//     <i> Default: 0x01
#define _MAC6          0x5E

//   </h>
//   <h>Local IP Address
//   ===================
//
//     <o>IP1: Address byte 1 <0-255>
//     <i> Default: 192
#define _IP1           192

//     <o>IP2: Address byte 2 <0-255>
//     <i> Default: 168
#define _IP2           168

//     <o>IP3: Address byte 3 <0-255>
//     <i> Default: 0
#define _IP3           0

//     <o>IP4: Address byte 4 <0-255>
//     <i> Default: 100
#define _IP4           100

//   </h>
//   <h>Default Gateway IP Address
//   =============================
//
//     <o>GW1: Address byte 1 <0-255>
//     <i> Default: 192
#define _GW1           192

//     <o>GW2: Address byte 2 <0-255>
//     <i> Default: 168
#define _GW2           168

//     <o>GW3: Address byte 3 <0-255>
//     <i> Default: 0
#define _GW3           0

//     <o>GW4: Address byte 4 <0-255>
//     <i> Default: 254
#define _GW4           254

//   </h>
//   <h>Subnet mask
//   ==============
//
//     <o>MSK1: Mask byte 1 <0-255>
//     <i> Default: 255
#define _MSK1          255

//     <o>MSK2: Mask byte 2 <0-255>
//     <i> Default: 255
#define _MSK2          255

//     <o>MSK3: Mask byte 3 <0-255>
//     <i> Default: 255
#define _MSK3          255

//     <o>MSK4: Mask byte 4 <0-255>
//     <i> Default: 0
#define _MSK4          0

//   </h>
//   <h>Primary DNS Server
//   =====================
//
//     <o>P_DNS1: Address byte 1 <0-255>
//     <i> Default: 194
#define _pDNS1         194

//     <o>P_DNS2: Address byte 2 <0-255>
//     <i> Default: 25
#define _pDNS2         25

//     <o>P_DNS3: Address byte 3 <0-255>
//     <i> Default: 2
#define _pDNS3         2

//     <o>P_DNS4: Address byte 4 <0-255>
//     <i> Default: 129
#define _pDNS4         129

//   </h>
//   <h>Secondary DNS Server
//   =======================
//
//     <o>S_DNS1: Address byte 1 <0-255>
//     <i> Default: 194
#define _sDNS1         194

//     <o>S_DNS2: Address byte 2 <0-255>
//     <i> Default: 25
#define _sDNS2         25

//     <o>S_DNS3: Address byte 3 <0-255>
//     <i> Default: 2
#define _sDNS3         2

//     <o>S_DNS4: Address byte 4 <0-255>
//     <i> Default: 130
#define _sDNS4         130

//   </h>
//   <h>ARP Definitions
//   ==================
//
//     <o>ARP_TABSIZE: ARP Cache Table size <5-100>
//     <i> Number of cached hardware/IP addresses
//     <i> Default: 10
#define ARP_TABSIZE    10

//     <o>ARP_TIMEOUT: ARP Cache Timeout in seconds <5-255>
//     <i> A timeout for a cached hardware/IP addresses
//     <i> Default: 150
#define ARP_TIMEOUT    150

//     <o>ARP_MAXRETRY: ARP Number of Retries <0-20>
//     <i> Number of Retries to resolve an IP address
//     <i> before ARP module gives up
//     <i> Default: 4
#define ARP_MAXRETRY   4

//     <o>ARP_RESEND: ARP Resend Timeout in seconds <1-10>
//     <i> A timeout to resend the ARP Request
//     <i> Default: 2
#define ARP_RESEND     2

//   </h>
//   <q>NBNS_ENABLE: Enable NetBIOS Name Service
//   ===========================================
//   <i> When this option is enabled, the embedded host can be
//   <i> accessed by his name on the local LAN using NBNS protocol.
//   <i> You need to modify also the number of UDP Sockets,
//   <i> because NBNS protocol uses one UDP socket to run.
#define NBNS_ENABLE    1

//   <q>DHCP_ENABLE: Enable Dynamic Host Configuration
//   =================================================
//   <i> When this option is enabled, local IP address, Net Mask
//   <i> and Default Gateway are obtained automatically from
//   <i> the DHCP Server on local LAN.
//   <i> You need to modify also the number of UDP Sockets,
//   <i> because DHCP protocol uses one UDP socket to run.
#define DHCP_ENABLE    1

// </e>

// <e>PPP Network Interface
// ========================
// <i> Enable or disable PPP Network Interface
#define PPP_ENABLE     0

//   <h>Local IP Address
//   ===================
//
//     <o>IP1: Address byte 1 <0-255>
//     <i> Default: 192
#define _IP1P          192

//     <o>IP2: Address byte 2 <0-255>
//     <i> Default: 168
#define _IP2P          168

//     <o>IP3: Address byte 3 <0-255>
//     <i> Default: 125
#define _IP3P          125

//     <o>IP4: Address byte 4 <0-255>
//     <i> Default: 1
#define _IP4P          1

//   </h>
//   <h>Subnet mask
//   ==============
//
//     <o>MSK1: Mask byte 1 <0-255>
//     <i> Default: 255
#define _MSK1P         255

//     <o>MSK2: Mask byte 2 <0-255>
//     <i> Default: 255
#define _MSK2P         255

//     <o>MSK3: Mask byte 3 <0-255>
//     <i> Default: 255
#define _MSK3P         255

//     <o>MSK4: Mask byte 4 <0-255>
//     <i> Default: 0
#define _MSK4P         0

//   </h>
//   <h>Primary DNS Server
//   =====================
//
//     <o>P_DNS1: Address byte 1 <0-255>
//     <i> Default: 194
#define _pDNS1P        194

//     <o>P_DNS2: Address byte 2 <0-255>
//     <i> Default: 25
#define _pDNS2P        25

//     <o>P_DNS3: Address byte 3 <0-255>
//     <i> Default: 2
#define _pDNS3P        2

//     <o>P_DNS4: Address byte 4 <0-255>
//     <i> Default: 129
#define _pDNS4P        129

//   </h>
//   <h>Secondary DNS Server
//   =======================
//
//     <o>S_DNS1: Address byte 1 <0-255>
//     <i> Default: 194
#define _sDNS1P        194

//     <o>S_DNS2: Address byte 2 <0-255>
//     <i> Default: 25
#define _sDNS2P        25

//     <o>S_DNS3: Address byte 3 <0-255>
//     <i> Default: 2
#define _sDNS3P        2

//     <o>S_DNS4: Address byte 4 <0-255>
//     <i> Default: 130
#define _sDNS4P        130

//   </h>
//   <q>Obtain Client IP address automatically
//   =========================================
//   <i> This option only applies when PPP Dial-up is used to dial
//   <i> to remote PPP Server. If checked, network connection
//   <i> dynamically obtains an IP address from remote PPP Server.
#define PPP_GETIP      1

//   <q>Use Default Gateway on remote Network
//   ========================================
//   <i> This option only applies when both Ethernet and PPP Dial-up
//   <i> are used. If checked, data that cannot be sent to local LAN
//   <i> is forwarded to Dial-up network instead.
#define PPP_DEFGW      1

//   <h>Async Control Character Map
//   ==============================
//
//     <o>ACCM1: Map char 31..24 mask <0x00-0xff>
//     <i> Maps control characters from 31...24
//     <i> Default: 0x00
#define _ACCM1         0x00

//     <o>ACCM2: Map char 23..16 mask <0x00-0xff>
//     <i> Maps control characters from 23...16
//     <i> For XON/XOFF set this value to: 0x0A
//     <i> Default: 0x00
#define _ACCM2         0x0A

//     <o>ACCM3: Map char 15..8 mask <0x00-0xff>
//     <i> Maps control characters from 15...8
//     <i> Default: 0x00
#define _ACCM3         0x00

//     <o>ACCM4: Map char 7..0 mask <0x00-0xff>
//     <i> Maps control characters from 7...0
//     <i> Default: 0x00
#define _ACCM4         0x00

//   </h>
//   <h>Retransmissions and Timeouts
//   ===============================
//
//     <o>LCP_MAXRETRY: LCP Number of Retries <0-20>
//     <i> How many times Link Control Protocol will try to retransmit
//     <i> data before giving up. Increase this value for links with
//     <i> low baud rates or high latency.
//     <i> Default: 2
#define LCP_MAXRETRY   2

//     <o>LCP_RETRYTOUT: LCP Retry Timeout in seconds <1-10>
//     <i> If no response received within this time frame,
//     <i> LCP module will try to resend data again.
//     <i> Default: 2
#define LCP_RETRYTOUT  2

//     <o>PAP_MAXRETRY: PAP Number of Retries <0-20>
//     <i> How many times Password Authentication Protocol will try to 
//     <i> retransmit data before giving up. Increase this value for links
//     <i> with low baud rates or high latency.
//     <i> Default: 3
#define PAP_MAXRETRY   3

//     <o>PAP_RETRYTOUT: PAP Retry Timeout in seconds <1-10>
//     <i> If no response received within this time frame,
//     <i> PAP module will try to resend data again
//     <i> Default: 3
#define PAP_RETRYTOUT  3

//     <o>IPCP_MAXRETRY: IPCP Number of Retries <0-20>
//     <i> How many times Internet Protocol Control Protocol will try
//     <i> to retransmit data before giving up. Increase this value for
//     <i> links with low baud rates or high latency.
//     <i> Default: 3
#define IPCP_MAXRETRY  3

//     <o>IPCP_RETRYTOUT: IPCP Retry Timeout in seconds <1-10>
//     <i> If no response received within this time frame,
//     <i> IPCP module will try to resend data again
//     <i> Default: 2
#define IPCP_RETRYTOUT 2

//   </h>
// </e>
// <e>SLIP Network Interface
// ========================
// <i> Enable or disable SLIP Network Interface
#define SLIP_ENABLE    0

//   <h>Local IP Address
//   ===================
//
//     <o>IP1: Address byte 1 <0-255>
//     <i> Default: 192
#define _IP1S          192

//     <o>IP2: Address byte 2 <0-255>
//     <i> Default: 168
#define _IP2S          168

//     <o>IP3: Address byte 3 <0-255>
//     <i> Default: 225
#define _IP3S          225

//     <o>IP4: Address byte 4 <0-255>
//     <i> Default: 1
#define _IP4S          1

//   </h>
//   <h>Subnet mask
//   ==============
//
//     <o>MSK1: Mask byte 1 <0-255>
//     <i> Default: 255
#define _MSK1S         255

//     <o>MSK2: Mask byte 2 <0-255>
//     <i> Default: 255
#define _MSK2S         255

//     <o>MSK3: Mask byte 3 <0-255>
//     <i> Default: 255
#define _MSK3S         255

//     <o>MSK4: Mask byte 4 <0-255>
//     <i> Default: 0
#define _MSK4S         0

//   </h>
//   <h>Primary DNS Server
//   =====================
//
//     <o>P_DNS1: Address byte 1 <0-255>
//     <i> Default: 194
#define _pDNS1S        194

//     <o>P_DNS2: Address byte 2 <0-255>
//     <i> Default: 25
#define _pDNS2S        25

//     <o>P_DNS3: Address byte 3 <0-255>
//     <i> Default: 2
#define _pDNS3S        2

//     <o>P_DNS4: Address byte 4 <0-255>
//     <i> Default: 129
#define _pDNS4S        129

//   </h>
//   <h>Secondary DNS Server
//   =======================
//
//     <o>S_DNS1: Address byte 1 <0-255>
//     <i> Default: 194
#define _sDNS1S        194

//     <o>S_DNS2: Address byte 2 <0-255>
//     <i> Default: 25
#define _sDNS2S        25

//     <o>S_DNS3: Address byte 3 <0-255>
//     <i> Default: 2
#define _sDNS3S        2

//     <o>S_DNS4: Address byte 4 <0-255>
//     <i> Default: 130
#define _sDNS4S        130

//   </h>
//   <q>Use Default Gateway on remote Network
//   ========================================
//   <i> This option only applies when both Ethernet and SLIP Dial-up
//   <i> are used. If checked, data that cannot be sent to local LAN
//   <i> is forwarded to Dial-up network instead.
#define SLIP_DEFGW     1

// </e>
// <e>UDP Sockets
// ==============
// <i> Enable or disable UDP Sockets
#define UDP_ENABLE     1

//   <o>UDP_NUMSOCKS: Number of UDP Sockets <1-20>
//   <i> Number of available UDP sockets
//   <i> Default: 5
#define UDP_NUMSOCKS   2

//   <o>UDP_LASTPORT: Highest port for autoselect <1-32767>
//   <i> Highest port number for UDP port when the port is not provided
//   <i> by the user but is automatically selected by the system.
//   <i> Default: 1023
#define UDP_LASTPORT   1023

// </e>
// <e>TCP Sockets
// ==============
// <i> Enable or disable TCP Sockets
#define TCP_ENABLE     1

//   <o>TCP_NUMSOCKS: Number of TCP Sockets <1-20>
//   <i> Number of available TCP sockets
//   <i> Default: 5
#define TCP_NUMSOCKS   1

//   <o>TCP_LASTPORT: Highest port for autoselect <1-32767>
//   <i> Highest port number for TCP port when the port is not provided
//   <i> by the user but is automatically selected by the system.