?? menu.c
字號:
#include "app_ex.h"
#include "hal.h"
#include "lcd128_64.h"
#include "string.h"
#include "Font.h"
INT8U NowItem = 0;
INT8U FirstItem = 0;
INT8U TopDisp = 1;
unsigned char MenuItem[13][16]; //菜單緩沖區
extern INT8U ContrastValue;
extern void clockmodes_main(void);
extern void random_main(void);
extern void power_modes_main(void);
extern void dma_main(void);
extern void aes_main(void);
extern void adc_main(void);
void Page7Display(INT8U ss, INT8U tt);
INT8U DrawMenu(INT8U MenuItem[][16] , INT8U MenuNo);
void MenuMenuDisp(void);
void Page0Display(void);
void SettingDisp(void);
void DoSetContrast(void);
void LanguageDisp(void);
void BackLampDisp(void);
//*********************************************************************************
//函數名:INT8U DrawMenu(INT8U MenuItem[][16] , INT8U MenuNo)
//功能:菜單顯示
//輸入：無
//輸出：無
//*********************************************************************************
INT8U DrawMenu(INT8U MenuItem[][16] , INT8U MenuNo)
{
INT8U ii;
INT8U key;
INT8U NowScreen = 1;
ClearScreen();
Page0Display();
while(1)
{
if(NowScreen)
{
NowScreen = 0;
if(MenuNo > 2)
{
for(ii = 0 ; ii < 3 ; ii++)
{
if(NowItem != ii)
{
Print((ii*2+1),0,MenuItem[FirstItem + ii],1);
}
else
{
Print((ii*2+1),0,MenuItem[FirstItem + ii],0);
}
}
}
else
{
for(ii = 0 ; ii < 2 ; ii++)
{
if(NowItem != ii)
{
Print((ii*2+1),0,MenuItem[FirstItem + ii],1);
}
else
{
Print((ii*2+1),0,MenuItem[FirstItem + ii],0);
}
}
}
Page7Display((FirstItem + NowItem),(MenuNo+1));
while(ScanKey() != 0xff);
halWait(5);
}
key = ScanKey();
if(K_UP == key)
{
if(NowItem > 0) NowItem -= 1;
else if(FirstItem > 0) FirstItem -= 1;
NowScreen = 1;
}
if(K_DOWN == key)
{
if(MenuNo > 2)
{
if(NowItem < 2) NowItem += 1;
else if((FirstItem + 3) < MenuNo) FirstItem += 1;
NowScreen = 1;
}
else
{
if(NowItem < 1) NowItem += 1;
NowScreen = 1;
}
}
if(K_OK == key)
{
while(ScanKey() != 0xff);
halWait(5);
return FirstItem + NowItem;
}
if(K_CANCEL == key)
{
while(ScanKey() != 0xff);
halWait(5);
return 0xff;
}
}
}
//*********************************************************************************
//函數名:void TurnOnDisp(void)
//功能:開機畫面顯示
//輸入：無
//輸出：無
//*********************************************************************************
void TurnOnDisp(void)
{
INT8U i;
LoadICO();
for(i=0; i<12; i++)
halWait(200);
}
//*********************************************************************************
//函數名:void MenuMenuDisp( void )
//功能:主菜單顯示
//輸入：無
//輸出：無
//*********************************************************************************
void MenuMenuDisp( void )
{
INT8U sel;
if(LanguageSel == 1)
{
strcpy((char*)MenuItem[0] ,"1:RF TEST ");
// strcpy((char*)MenuItem[1] ,"2:ADC CONV ");
// strcpy((char*)MenuItem[2] ,"3:ADC SERIES ");
strcpy((char*)MenuItem[1] ,"2:STOP WATCH ");
strcpy((char*)MenuItem[2] ,"3:UART ");
strcpy((char*)MenuItem[3] ,"4:CLOCKMODES ");
strcpy((char*)MenuItem[4] ,"5:RANDOM ");
strcpy((char*)MenuItem[5] ,"6:AES ");
// strcpy((char*)MenuItem[8] ,"9:FLASH ");
strcpy((char*)MenuItem[6] ,"7:DMA ");
strcpy((char*)MenuItem[7] ,"8:POWER ");
strcpy((char*)MenuItem[8] ,"9:SETTING ");
}
else
{
strcpy((char*)MenuItem[0] ,"1:無線測試 ");
// strcpy((char*)MenuItem[1] ,"2:ADC 測試 ");
// strcpy((char*)MenuItem[2] ,"3:按鍵測試 ");
strcpy((char*)MenuItem[1] ,"2:跑表 ");
strcpy((char*)MenuItem[2] ,"3:串口測試 ");
strcpy((char*)MenuItem[3] ,"4:時鐘模式 ");
strcpy((char*)MenuItem[4] ,"5:隨機數測試 ");
strcpy((char*)MenuItem[5] ,"6:加密解密測試 ");
// strcpy((char*)MenuItem[8] ,"9:FLASH測試 ");
strcpy((char*)MenuItem[6] ,"7:直接存貯測試 ");
strcpy((char*)MenuItem[7] ,"8:電源模式 ");
strcpy((char*)MenuItem[8] ,"9:表演板設定 ");
}
FirstItem = 0;
NowItem = 0;
TopDisp = 1;
sel = DrawMenu(MenuItem , 9);
while(ScanKey() != 0xff);
halWait(5);
switch(sel)
{
case 0:
{
TopDisp = 2;
RfTestDisp();
}break;
case 1:
{
stop_watch_main();
}break;
case 2:
{
uart_main();;
}break;
case 3:
{
clockmodes_main();
}break;
case 4:
{
random_main();
}break;
case 5:
{
aes_main();
}break;
case 6:
{
dma_main();
}break;
case 7:
{
power_modes_main();
}break;
case 8:
{
TopDisp = 3;
SettingDisp();
}break;
default:
break;
}
}
//*********************************************************************************
//函數名:void SettingDisp(void)
//功能:參數設定菜單顯示
//輸入：無
//輸出：無
//*********************************************************************************
void SettingDisp(void)
{
INT8U sel;
if(LanguageSel == 1)
{
strcpy((char*)MenuItem[0] ,"1:Contrast ");
strcpy((char*)MenuItem[1] ,"2:BackLamp ");
strcpy((char*)MenuItem[2] ,"3:Language ");
}
else
{
strcpy((char*)MenuItem[0] ,"1:對比度設定 ");
strcpy((char*)MenuItem[1] ,"2:背光開關 ");
strcpy((char*)MenuItem[2] ,"3:語言設定 ");
}
FirstItem = 0;
NowItem = 0;
while(1)
{
sel = DrawMenu(MenuItem , 3);
switch(sel)
{
case 0:
{
DoSetContrast();
}break;
case 1:
{
BackLampDisp();
}break;
case 2:
{
LanguageDisp();
}break;
case 0xff:
{
return;
}
}
}
}
//*********************************************************************************
//函數名:void BackLampDisp(void)
//功能:背光設定菜單顯示
//輸入：無
//輸出：無
//*********************************************************************************
void BackLampDisp(void)
{
INT8U sel;
if(LanguageSel == 1)
{
strcpy((char*)MenuItem[0] ,"1:ON ");
strcpy((char*)MenuItem[1] ,"2:OFF ");
}
else
{
strcpy((char*)MenuItem[0] ,"1:開 ");
strcpy((char*)MenuItem[1] ,"2:關 ");
}
FirstItem = 0;
NowItem = 0;
sel = DrawMenu(MenuItem , 2);
switch(sel)
{
case 0:
{
P0_4 = 0;
}break;
case 1:
{
P0_4 = 1;
}break;
case 0xff:
{
;
}break;
}
if(LanguageSel == 1)
{
strcpy((char*)MenuItem[0] ,"1:Contrast ");
strcpy((char*)MenuItem[1] ,"2:BackLamp ");
strcpy((char*)MenuItem[2] ,"3:Language ");
}
else
{
strcpy((char*)MenuItem[0] ,"1:對比度設定 ");
strcpy((char*)MenuItem[1] ,"2:背光開關 ");
strcpy((char*)MenuItem[2] ,"3:語言設定 ");
}
FirstItem = 0;
NowItem = 0;
}
//*********************************************************************************
//函數名:void LanguageDisp(void)
//功能:語言設定菜單顯示
//輸入：無
//輸出：無
//*********************************************************************************
void LanguageDisp(void)
{
INT8U sel;
if(LanguageSel == 1)
{
strcpy((char*)MenuItem[0] ,"1:SimpChinese ");
strcpy((char*)MenuItem[1] ,"2:Eenglish ");
}
else
{
strcpy((char*)MenuItem[0] ,"1:中文顯示 ");
strcpy((char*)MenuItem[1] ,"2:英文顯示 ");
}
FirstItem = 0;
NowItem = 0;
sel = DrawMenu(MenuItem , 2);
switch(sel)
{
case 0:
{
LanguageSel = 0;
}break;
case 1:
{
LanguageSel = 1;;
}break;
case 0xff:
{
;
}break;
}
if(LanguageSel == 1)
{
strcpy((char*)MenuItem[0] ,"1:Contrast ");
strcpy((char*)MenuItem[1] ,"2:BackLamp ");
strcpy((char*)MenuItem[2] ,"3:Language ");
}
else
{
strcpy((char*)MenuItem[0] ,"1:對比度設定 ");
strcpy((char*)MenuItem[1] ,"2:背光開關 ");
strcpy((char*)MenuItem[2] ,"3:語言設定 ");
}
FirstItem = 0;
NowItem = 0;
}
/******************************************************************************/
//函數名稱:DoSetContrast
//功能:設置液晶對比度
//Input Vector:NONE
//Output Vector :NONE
/*******************************************************************************/
void DoSetContrast(void)
{
INT8U key;
INT8U ii;
INT8U Temp_ContrastValue;
INT8U state_key = 1;
Temp_ContrastValue = ContrastValue;
ClearScreen();
Rectangle(10 , 3 , 100 , 5);
if(LanguageSel == 1)
{
Print6(2, 28, "SetContrast", 1);
}
else
{
Print(1, 32, "對比度", 1);
}
while(1)
{
if(state_key == 1)
{
state_key = 0;
Printn(6 , 80 , Temp_ContrastValue , 1 , 2);
// SetContrast(1 , Temp_ContrastValue);
SetRamAddr(4 ,11);
for(ii = 11; ii < 100 ;ii++)
{
Lcdwritedata(0x00);
}
SetRamAddr(4 ,11);
for(ii = 11; ii < (Temp_ContrastValue * 2.57) + 11 ;ii++)
{
Lcdwritedata(0xff);
}
}
key = ScanKey();
if(K_OK == key)
{
SetContrast(1 , Temp_ContrastValue);
ContrastValue = Temp_ContrastValue;
return;
}
else if(K_RIGHT == key)
{
if(Temp_ContrastValue < 30)
{
Temp_ContrastValue += 1;
}
if(Temp_ContrastValue>=30)
{
Temp_ContrastValue=10;
}
state_key = 1;
}
else if(K_CANCEL == key)
{
ClearScreen();
return;
}
else if(K_LIFT == key)
{
if(Temp_ContrastValue > 10)
{
Temp_ContrastValue -= 1;
}
else
{
Temp_ContrastValue = 30;
}
state_key = 1;
}
while(ScanKey() != 0xff);
}
}
/*********************************************************************************/
//函數名:void Page7Display(INT8U ss, INT8U tt)
//功能:第七頁顯示內容.
//輸入：ss:當前的選擇項 tt:該二維數組的項數
//輸出：無
/*********************************************************************************/
void Page7Display(INT8U ss, INT8U tt)
{
INT8U sel,temp;
sel = ss;
temp = tt-2;
Print6(7,10,"OK",1);
if(sel > 0)
{
Print6(7,30,"UP",1);
}
else
{
Print6(7,30," ",1);
}
if(sel < temp)
{
Print6(7,56,"DOWN",1);
}
else
{
Print6(7,56," ",1);
}
Print6(7,89,"ESC",1);
}
/*********************************************************************************/
//函數名:void Page7Display(INT8U ss, INT8U tt)
//功能:第七頁顯示內容.
//輸入：ss:當前的選擇項 tt:該二維數組的項數
//輸出：無
/*********************************************************************************/
void Page0Display(void)
{
switch(TopDisp)
{
case 1:
{
Print6(0,10,"---MAIN MENU---",1);
}break;
case 2:
{
Print6(0,10," ---RF TEST--- ",1);
}break;
case 3:
{
Print6(0,10," ---SETTING--- ",1);
}break;
case 7:
{
Print6(0,10," --CLOCKMODE--",1);
}break;
case 8:
{
Print6(0,10,"---FLASH TEST---",1);
}
case 10:
{
Print6(0,10,"-POWERMODE TEST-",1);
}break;
}
}
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -