?? tft_s6d0164.c
字號:
S6D0164_SEND_COMMAND(0x0036);
S6D0164_SEND_DATA(right);
S6D0164_SEND_COMMAND(0x0037);
S6D0164_SEND_DATA(left);
S6D0164_SEND_COMMAND(0x0038);
S6D0164_SEND_DATA(bottom);
S6D0164_SEND_COMMAND(0x0039);
S6D0164_SEND_DATA(top);
}
/******************************************************************************/
// Description: Set start RAM address which is write to AC(Address
// Counter) register.
// Input:
// left: start Horizon address of AC
// top: start Vertical address of AC.
// Return:
// None.
// Note:
/******************************************************************************/
__inline void S6D0164_set_start_address(
uint8 left,
uint8 top
)
{
S6D0164_SEND_COMMAND(0x0020);
S6D0164_SEND_DATA(left);
S6D0164_SEND_COMMAND(0x0021);
S6D0164_SEND_DATA(top);
}
/******************************************************************************/
// Description: invalidate a rectang of in LCD
// Global resource dependence:
// Author: Jim.zhang
// Note:
// modify: jim.cui 2005.0728 use dma to transport data
/******************************************************************************/
LOCAL ERR_LCD_E S6D0164_Invalidate(void)
{
uint16 i,j;
//uint16 address = 0;
uint16 *buf_ptr = (uint16 *)LCD_GetLCDBuffer();
#ifdef LCD_USE_DMA
//uint32 dummy_before,dummy_after;
S6D0164_set_display_window(0, 0, S6D0164_WIDTH-1, S6D0164_HEIGHT-1);
S6D0164_set_start_address(0, 0);
/*
address = (uint16) ( (((S6D0164_WIDTH - 1 + OFFSET_X) & 0xFF ) << 8 ) | (OFFSET_X));
S6D0164_sendcommand1(0x44, address); // set horizon address
address = (uint16) ( ((S6D0164_HEIGHT-1) & 0xFF) << 8 );
S6D0164_sendcommand1(0x45, address); // set vertical address
S6D0164_sendcommand1(0x0021, OFFSET_X);
*/
//S6D0164_SEND_COMMAND(0x0017); // send data.
//dummy_before = 1 % 4; // Inserted numbers befor every arrow.
//dummy_after = 3 - (S6D0164_WIDTH % 4); // Inserted numbers after every arrow.
for(j=0; j<(S6D0164_HEIGHT ); j++)
{
dma_request(0, (uint32)(buf_ptr + j * S6D0164_WIDTH), 0x58020000, S6D0164_WIDTH,
1, 0);
}
#else
SCI_TRACE_LOW("tft_S6D0164.c S6D0164_Invalidate line%d", __LINE__);
S6D0164_set_display_window(0, 0, S6D0164_WIDTH-1, S6D0164_HEIGHT-1);
S6D0164_set_start_address(0, 0);
/*
address = (uint16) ( (((S6D0164_WIDTH - 1 + OFFSET_X) & 0xFF ) << 8 ) | (OFFSET_X));
S6D0164_sendcommand1(0x44, address); // set horizon address
address = (uint16) ( ((S6D0164_HEIGHT-1) & 0xFF) << 8 );
S6D0164_sendcommand1(0x45, address); // set vertical address
S6D0164_sendcommand1(0x0021, OFFSET_X);
*/
//S6D0164_SEND_COMMAND(0x0017); // send data.
for(i=0; i<(S6D0164_WIDTH * S6D0164_HEIGHT); i++)
S6D0164_SEND_DATA( *buf_ptr++ );
#endif
return ERR_LCD_NONE;
}
/*****************************************************************************/
// Description: Get the lcd base information..
// Global resource dependence:
// Author: louis.wei
// Note:
/*****************************************************************************/
LOCAL ERR_LCD_E S6D0164_GetInfo(
LCD_INFO_T *lcd_info_ptr //lcd information struct pointer
)
{
if ( PNULL == lcd_info_ptr )
{
return ERR_LCD_POINTER_NULL;
}
lcd_info_ptr->r_bitmask = 0xf800;
lcd_info_ptr->g_bitmask = 0x07e0;
lcd_info_ptr->b_bitmask = 0x001f;
lcd_info_ptr->bits_per_pixel = 16;
lcd_info_ptr->contrast_min = 0x00;
lcd_info_ptr->contrast_max = 63;
lcd_info_ptr->contrast_defaut = 0x0A;
lcd_info_ptr->lcd_width = S6D0164_WIDTH;
lcd_info_ptr->lcd_height = S6D0164_HEIGHT;
lcd_info_ptr->lcdbuff_ptr = (void *)LCD_GetLCDBuffer();
return ERR_LCD_NONE;
}
/******************************************************************************/
// Description: Copy a retangle data from clcd_buffer to display RAM.
// then the rectangle display is to be refreshed
// Global resource dependence:
// Author: Jim.zhang
// Note:
// To improve speed, lcd is operate in HIGH SPEED RAM WRITE MODE(4
// uint16 are write continuously always.) So, some dummy uint16
// should be inserted to satisfy this mode. Please refer to spec.
// modify: jim.cui 2005.0728 use dma to transport data
/******************************************************************************/
LOCAL ERR_LCD_E S6D0164_InvalidateRect(
uint16 left, //the left value of the rectangel
uint16 top, //top of the rectangle
uint16 right, //right of the rectangle
uint16 bottom //bottom of the rectangle
)
{
uint32 i, j;
uint32 dummy_before, dummy_after;
uint32 row, column,rect_width;
uint16 *buf_ptr = (uint16 *)LCD_GetLCDBuffer();
//****************************************************
//**********解決進入攝像模式的問題*******************
if (LCD_GetRefreshFlag() != TRUE )
{
SCI_TRACE_LOW(" LCD_GetRefreshFlag");
return ERR_LCD_OPERATE_FAIL ;
}
//*****************************************************
//SCI_TRACE_LOW("tft_S6D0164.c S6D0164_InvalidateRect line%d: left = %d, top = %d, right = %d, bottom = %d", __LINE__, left, top, right,bottom);
left = (left >= S6D0164_WIDTH) ? S6D0164_WIDTH-1 : left;
right = (right >= S6D0164_WIDTH) ? S6D0164_WIDTH-1 : right;
top = (top >= S6D0164_HEIGHT) ? S6D0164_HEIGHT-1 : top;
bottom = (bottom >= S6D0164_HEIGHT) ? S6D0164_HEIGHT-1 : bottom;
if ( ( right < left ) || ( bottom < top ) )
{
return ERR_LCD_PARAMETER_WRONG;
}
S6D0164_set_display_window(left, top, right, bottom);
// In High Speed RAM Write Mode. Maybe some dummy data are insterted.
//dummy_before = (left) % 4; // Inserted numbers befor every arrow.
//dummy_after = 3 - (right % 4); // Inserted numbers after every arrow.
#ifdef LCD_USE_DMA
S6D0164_set_start_address(left, top);
S6D0164_SEND_COMMAND(WR_GRAM_COMMAND); // send data.
rect_width = right-left+1;
for (j = top; j <= bottom; j++)
{
dma_request(0, (uint32)(buf_ptr + j * S6D0164_WIDTH+left), 0x58020000, rect_width,
1, 0);
}
#else
row = bottom - top;
column = right - left;
S6D0164_set_start_address(left - dummy_before, top);
//S6D0164_SEND_COMMAND(0x17); // send data.
for (i = 0; i <= row; i++)
{
for(j = 0; j<dummy_before; j++) // Insert dummy write befor real write.
S6D0164_SEND_DATA(0x00);
for (j = 0; j <= column; j++) // real write
S6D0164_SEND_DATA( *(buf_ptr + (top+i)*S6D0164_WIDTH + left+j) );
for(j=0; j<dummy_after; j++) // Insert dummy write after real write.
S6D0164_SEND_DATA(0x00);
}
#endif
return ERR_LCD_NONE;
}
/******************************************************************************/
// Description: for mp4 display
// Global resource dependence:
// Author: juan.zhang
/******************************************************************************/
LOCAL ERR_LCD_E S6D0164_InvalidateRectImage(
uint16 left, //the left value of the rectangel
uint16 top, //top of the rectangle
uint16 right, //right of the rectangle
uint16 bottom, //bottom of the rectangle
uint16 *buf_ptr,
uint8 is_invert//ignore
)
{
uint32 i, j;
uint32 dummy_before, dummy_after;
uint32 row, column,rect_width;
left = (left >= MP4_MAX_WIDTH) ? MP4_MAX_WIDTH-1 : left;
right = (right >= MP4_MAX_WIDTH) ? MP4_MAX_WIDTH-1 : right;
top = (top >= MP4_MAX_HEIGHT) ? MP4_MAX_HEIGHT-1 : top;
bottom = (bottom >= MP4_MAX_HEIGHT) ? MP4_MAX_HEIGHT-1 : bottom;
left = 0;
right = 127;
top = 0;
bottom = 159; //175;
if ( ( right < left ) || ( bottom < top ) )
{
return ERR_LCD_PARAMETER_WRONG;
}
SCI_TRACE_LOW("tft_S6D0164.c S6D0164_InvalidateRectImage() left=%d,right=%d,top=%d,bottom=%d,is_invert=%d line%d", left,right,top,bottom,is_invert,__LINE__);
if (is_invert)
{
S6D0164_sendcommand1(0x03,0x0028 );
}
else
{
S6D0164_sendcommand1(0x03,0x0030 );
}
S6D0164_set_display_window(left, top, right, bottom);
// In High Speed RAM Write Mode. Maybe some dummy data are insterted.
dummy_before = (left) % 4; // Inserted numbers befor every arrow.
dummy_after = 3 - (right % 4); // Inserted numbers after every arrow.
#if 1
// S6D0164_set_display_window(left, top, right, bottom);
if (is_invert)
{
S6D0164_set_start_address(right, top);
}
else
{
S6D0164_set_start_address(left, top);
}
S6D0164_SEND_COMMAND(WR_GRAM_COMMAND); // send data.
if (is_invert)
{
for (j = left; j <= right; j++)
{
for (i = top; i <= bottom; i++)
{
S6D0164_SEND_DATA( *(buf_ptr + j * 176 + i) );
}
}
}
else
{
for (j = top; j <= bottom; j++)
{
for (i = left; i <= right; i++)
{
S6D0164_SEND_DATA( *(buf_ptr + j * 176 + i) );
}
}
}
#endif
S6D0164_sendcommand1(0x03,0x0030 );
return ERR_LCD_NONE;
}
/*@Zhemin.Lin, CR9122, begin*/
static LCD_SPEC_T g_S6D0164_spec =
{
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -