///
 // Copyright (c) 2003, Wolver Wang, MinShan Inc. R&D Center
 // wolver@minshan-inc.com
 // All rights reserved. 
 //
 // Redistribution and use in source and binary forms, with or without 
 // modification, are permitted provided that the following conditions 
 // are met: 
 // 1. Redistributions of source code must retain the above copyright 
 //    notice, this list of conditions and the following disclaimer. 
 // 2. Redistributions in binary form must reproduce the above copyright 
 //    notice, this list of conditions and the following disclaimer in the 
 //    documentation and/or other materials provided with the distribution. 
 // 3. All advertising materials mentioning features or use of this software
 //    must display the following acknowledgement:
 //      This product includes software developed by Wolver Wang.
 // 4. The name of the author may not be used to endorse or promote
 //    products derived from this software without specific prior
 //    written permission.  
 //
 // THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
 // OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 // WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 // ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
 // DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 // DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
 // GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 // INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
 // WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 // NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 // SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
 ///
 

///
 // Copyright (c) 2003, Wolver Wang, MinShan Inc. R&D Center
 // wolver@minshan-inc.com
 // All rights reserved. 
 //
 // Redistribution and use in source and binary forms, with or without 
 // modification, are permitted provided that the following conditions 
 // are met: 
 // 1. Redistributions of source code must retain the above copyright 
 //    notice, this list of conditions and the following disclaimer. 
 // 2. Redistributions in binary form must reproduce the above copyright 
 //    notice, this list of conditions and the following disclaimer in the 
 //    documentation and/or other materials provided with the distribution. 
 // 3. All advertising materials mentioning features or use of this software
 //    must display the following acknowledgement:
 //      This product includes software developed by Wolver Wang.
 // 4. The name of the author may not be used to endorse or promote
 //    products derived from this software without specific prior
 //    written permission.  
 //
 // THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
 // OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 // WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 // ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
 // DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 // DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
 // GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 // INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
 // WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 // NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 // SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
 ///
 

///
 // 版權 2003, 王衛無，四川綿陽岷山集團有限公司--研究開發中心
 // wolver@minshan-inc.com
 // 保留一切權利
 //
 // 如果符合以下條件，則無論是以原代碼或非原代碼代碼形式，且不論是否修改，
 // 再分發和使用本軟件都是被允許的。
 // 1. 原代碼的再分發必須保留上述的版權聲明、本條件說明和以下免責聲明。
 // 2. 非原代碼形式的再分發，必須在證明文件和(或)其它一同提供的材料中重新
 //    作上述的版權聲明、本條件說明和以下免責聲明。
 // 3. 一切提及本軟件和使用的廣告材料必須顯示以下致謝：
 //    本產品包含王衛無（四川綿陽岷山集團有限公司--研究開發中心）開發的軟件。
 // 4. 如果沒有預先得到特定的書面許可，不能用作者的名字來宣傳推廣基于本軟件得到
 //    的產品。
 //
 // 免責聲明：
 // 本軟件是由某某作者提供，如果出現以下情況，作者都不承擔任何責任。
 // 1. 因作者的說明以及任何明確的或暗示的保證(包括但不限于表達某種商業性和適合某一
 //    特定目的暗示性保證)而產生的損失。
 // 2. 無論在何種情況下，對使用本軟件造成的任何直接的、間接的、偶然的、特定的、可預
 //    見性的和連帶產生的損失(包括但不限于獲取產品和服務、作用喪失、數據遺失、利益損
 //    失或商業干預)，無論這些損失是怎樣造成的，并且是以何種方式闡釋責任。
 // 3. 任何因使用本軟件而相關的合同、嚴格賠償責任和侵權行為(包含：疏忽或其它)的損失，
 //    甚至即便是可能的此類已經明示或暗示的損失。
 ///

#ifndef	__SYSTEM_H__
#define	__SYSTEM_H__


// 聲明本系統使用的MCU型號，程序中其他任何地方都沒有用到這個定義
//#define MCU		SPCE061A

// 定義 MCU 16bit的字節序模式
#define BIG_ENDIAN	1	// for SPCE061A

// 定義16bit的無符號整數聲明
#ifndef __UINT16__
#define __UINT16__
typedef unsigned int UINT16;
#endif

// 定義16bit的符號整數聲明
#ifndef __SINT16__
#define __SINT16__
typedef int SINT16;
#endif


#endif