/* * PCI Express Hot Plug Controller Driver * * Copyright (C) 1995,2001 Compaq Computer Corporation * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com) * Copyright (C) 2001 IBM Corp. * Copyright (C) 2003-2004 Intel Corporation * * All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or (at * your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or * NON INFRINGEMENT.  See the GNU General Public License for more * details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com> * */#include <linux/module.h>#include <linux/kernel.h>#include <linux/types.h>#include <linux/smp_lock.h>#include <linux/pci.h>#include <linux/workqueue.h>#include "../pci.h"#include "pciehp.h"static void interrupt_event_handler(struct work_struct *work);static int queue_interrupt_event(struct slot *p_slot, u32 event_type){	struct event_info *info;	info = kmalloc(sizeof(*info), GFP_ATOMIC);	if (!info)		return -ENOMEM;	info->event_type = event_type;	info->p_slot = p_slot;	INIT_WORK(&info->work, interrupt_event_handler);	schedule_work(&info->work);	return 0;}u8 pciehp_handle_attention_button(struct slot *p_slot){	u32 event_type;	/* Attention Button Change */	dbg("pciehp:  Attention button interrupt received.\n");	/*	 *  Button pressed - See if need to TAKE ACTION!!!	 */	info("Button pressed on Slot(%s)\n", slot_name(p_slot));	event_type = INT_BUTTON_PRESS;	queue_interrupt_event(p_slot, event_type);	return 0;}u8 pciehp_handle_switch_change(struct slot *p_slot){	u8 getstatus;	u32 event_type;	/* Switch Change */	dbg("pciehp:  Switch interrupt received.\n");	p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);	if (getstatus) {		/*		 * Switch opened		 */		info("Latch open on Slot(%s)\n", slot_name(p_slot));		event_type = INT_SWITCH_OPEN;	} else {		/*		 *  Switch closed		 */		info("Latch close on Slot(%s)\n", slot_name(p_slot));		event_type = INT_SWITCH_CLOSE;	}	queue_interrupt_event(p_slot, event_type);	return 1;}u8 pciehp_handle_presence_change(struct slot *p_slot){	u32 event_type;	u8 presence_save;	/* Presence Change */	dbg("pciehp:  Presence/Notify input change.\n");	/* Switch is open, assume a presence change	 * Save the presence state	 */	p_slot->hpc_ops->get_adapter_status(p_slot, &presence_save);	if (presence_save) {		/*		 * Card Present		 */		info("Card present on Slot(%s)\n", slot_name(p_slot));		event_type = INT_PRESENCE_ON;	} else {		/*		 * Not Present		 */		info("Card not present on Slot(%s)\n", slot_name(p_slot));		event_type = INT_PRESENCE_OFF;	}	queue_interrupt_event(p_slot, event_type);	return 1;}u8 pciehp_handle_power_fault(struct slot *p_slot){	u32 event_type;	/* power fault */	dbg("pciehp:  Power fault interrupt received.\n");	if ( !(p_slot->hpc_ops->query_power_fault(p_slot))) {		/*		 * power fault Cleared		 */		info("Power fault cleared on Slot(%s)\n", slot_name(p_slot));		event_type = INT_POWER_FAULT_CLEAR;	} else {		/*		 *   power fault		 */		info("Power fault on Slot(%s)\n", slot_name(p_slot));		event_type = INT_POWER_FAULT;		info("power fault bit %x set\n", 0);	}	queue_interrupt_event(p_slot, event_type);	return 1;}/* The following routines constitute the bulk of the   hotplug controller logic */static void set_slot_off(struct controller *ctrl, struct slot * pslot){	/* turn off slot, turn on Amber LED, turn off Green LED if supported*/	if (POWER_CTRL(ctrl)) {		if (pslot->hpc_ops->power_off_slot(pslot)) {			err("%s: Issue of Slot Power Off command failed\n",			    __func__);			return;		}	}	/*	 * After turning power off, we must wait for at least 1 second	 * before taking any action that relies on power having been	 * removed from the slot/adapter.	 */	msleep(1000);	if (PWR_LED(ctrl))		pslot->hpc_ops->green_led_off(pslot);	if (ATTN_LED(ctrl)) {		if (pslot->hpc_ops->set_attention_status(pslot, 1)) {			err("%s: Issue of Set Attention Led command failed\n",			    __func__);			return;		}	}}/** * board_added - Called after a board has been added to the system. * @p_slot: &slot where board is added * * Turns power on for the board. * Configures board. */static int board_added(struct slot *p_slot){	int retval = 0;	struct controller *ctrl = p_slot->ctrl;	dbg("%s: slot device, slot offset, hp slot = %d, %d ,%d\n",			__func__, p_slot->device,			ctrl->slot_device_offset, p_slot->hp_slot);	if (POWER_CTRL(ctrl)) {		/* Power on slot */		retval = p_slot->hpc_ops->power_on_slot(p_slot);		if (retval)			return retval;	}	if (PWR_LED(ctrl))		p_slot->hpc_ops->green_led_blink(p_slot);	/* Wait for ~1 second */	msleep(1000);	/* Check link training status */	retval = p_slot->hpc_ops->check_lnk_status(ctrl);	if (retval) {		err("%s: Failed to check link status\n", __func__);		set_slot_off(ctrl, p_slot);		return retval;	}	/* Check for a power fault */	if (p_slot->hpc_ops->query_power_fault(p_slot)) {		dbg("%s: power fault detected\n", __func__);		retval = POWER_FAILURE;		goto err_exit;	}	retval = pciehp_configure_device(p_slot);	if (retval) {		err("Cannot add device 0x%x:%x\n", p_slot->bus,		    p_slot->device);		goto err_exit;	}	/*	 * Some PCI Express root ports require fixup after hot-plug operation.	 */	if (pcie_mch_quirk)		pci_fixup_device(pci_fixup_final, ctrl->pci_dev);	if (PWR_LED(ctrl))  		p_slot->hpc_ops->green_led_on(p_slot);	return 0;err_exit:	set_slot_off(ctrl, p_slot);	return retval;}/** * remove_board - Turns off slot and LEDs * @p_slot: slot where board is being removed */static int remove_board(struct slot *p_slot){	int retval = 0;	struct controller *ctrl = p_slot->ctrl;	retval = pciehp_unconfigure_device(p_slot);	if (retval)		return retval;	dbg("In %s, hp_slot = %d\n", __func__, p_slot->hp_slot);	if (POWER_CTRL(ctrl)) {		/* power off slot */		retval = p_slot->hpc_ops->power_off_slot(p_slot);		if (retval) {			err("%s: Issue of Slot Disable command failed\n",			    __func__);			return retval;		}	}	/*	 * After turning power off, we must wait for at least 1 second	 * before taking any action that relies on power having been	 * removed from the slot/adapter.	 */	msleep(1000);	if (PWR_LED(ctrl))		/* turn off Green LED */		p_slot->hpc_ops->green_led_off(p_slot);	return 0;}struct power_work_info {	struct slot *p_slot;	struct work_struct work;};/** * pciehp_power_thread - handle pushbutton events * @work: &struct work_struct describing work to be done * * Scheduled procedure to handle blocking stuff for the pushbuttons. * Handles all pending events and exits. */static void pciehp_power_thread(struct work_struct *work){	struct power_work_info *info =		container_of(work, struct power_work_info, work);	struct slot *p_slot = info->p_slot;	mutex_lock(&p_slot->lock);	switch (p_slot->state) {	case POWEROFF_STATE:		mutex_unlock(&p_slot->lock);		dbg("%s: disabling bus:device(%x:%x)\n",		    __func__, p_slot->bus, p_slot->device);		pciehp_disable_slot(p_slot);		mutex_lock(&p_slot->lock);		p_slot->state = STATIC_STATE;		break;	case POWERON_STATE:		mutex_unlock(&p_slot->lock);		if (pciehp_enable_slot(p_slot) &&		    PWR_LED(p_slot->ctrl))			p_slot->hpc_ops->green_led_off(p_slot);		mutex_lock(&p_slot->lock);		p_slot->state = STATIC_STATE;		break;	default:		break;	}	mutex_unlock(&p_slot->lock);