/* * Trantor T128/T128F/T228 defines *	Note : architecturally, the T100 and T128 are different and won't work * * Copyright 1993, Drew Eckhardt *	Visionary Computing *	(Unix and Linux consulting and custom programming) *	drew@colorado.edu *      +1 (303) 440-4894 * * DISTRIBUTION RELEASE 3.  * * For more information, please consult  * * Trantor Systems, Ltd. * T128/T128F/T228 SCSI Host Adapter * Hardware Specifications *  * Trantor Systems, Ltd.  * 5415 Randall Place * Fremont, CA 94538 * 1+ (415) 770-1400, FAX 1+ (415) 770-9910 *  * and  * * NCR 5380 Family * SCSI Protocol Controller * Databook * * NCR Microelectronics * 1635 Aeroplaza Drive * Colorado Springs, CO 80916 * 1+ (719) 578-3400 * 1+ (800) 334-5454 *//* * $Log: t128.h,v $ */#ifndef T128_H#define T128_H#define T128_PUBLIC_RELEASE 3#define TDEBUG_INIT	0x1#define TDEBUG_TRANSFER 0x2/* * The trantor boards are memory mapped. They use an NCR5380 or  * equivalent (my sample board had part second sourced from ZILOG). * NCR's recommended "Pseudo-DMA" architecture is used, where  * a PAL drives the DMA signals on the 5380 allowing fast, blind * transfers with proper handshaking.  *//* * Note : a boot switch is provided for the purpose of informing the  * firmware to boot or not boot from attached SCSI devices.  So, I imagine * there are fewer people who've yanked the ROM like they do on the Seagate * to make bootup faster, and I'll probably use this for autodetection. */#define T_ROM_OFFSET		0/* * Note : my sample board *WAS NOT* populated with the SRAM, so this * can't be used for autodetection without a ROM present. */#define T_RAM_OFFSET		0x1800/* * All of the registers are allocated 32 bytes of address space, except * for the data register (read/write to/from the 5380 in pseudo-DMA mode) */ #define T_CONTROL_REG_OFFSET	0x1c00	/* rw */#define T_CR_INT		0x10	/* Enable interrupts */#define T_CR_CT			0x02	/* Reset watchdog timer */#define T_STATUS_REG_OFFSET	0x1c20	/* ro */#define T_ST_BOOT		0x80	/* Boot switch */#define T_ST_S3			0x40	/* User settable switches, */#define T_ST_S2			0x20	/* read 0 when switch is on, 1 off */#define T_ST_S1			0x10#define T_ST_PS2		0x08	/* Set for Microchannel 228 */#define T_ST_RDY		0x04	/* 5380 DRQ */#define T_ST_TIM		0x02	/* indicates 40us watchdog timer fired */#define T_ST_ZERO		0x01	/* Always zero */#define T_5380_OFFSET		0x1d00	/* 8 registers here, see NCR5380.h */#define T_DATA_REG_OFFSET	0x1e00	/* rw 512 bytes long */#ifndef ASMint t128_abort(Scsi_Cmnd *);int t128_biosparam(Disk *, kdev_t, int*);int t128_detect(Scsi_Host_Template *);int t128_queue_command(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));int t128_reset(Scsi_Cmnd *, unsigned int reset_flags);int t128_proc_info (char *buffer, char **start, off_t offset,		   int length, int hostno, int inout);#ifndef NULL#define NULL 0#endif#ifndef CMD_PER_LUN#define CMD_PER_LUN 2#endif#ifndef CAN_QUEUE#define CAN_QUEUE 32 #endif/*  * I hadn't thought of this with the earlier drivers - but to prevent * macro definition conflicts, we shouldn't define all of the internal * macros when this is being used solely for the host stub. */#define TRANTOR_T128 {					\	name:           "Trantor T128/T128F/T228",	\	detect:         t128_detect,			\	queuecommand:   t128_queue_command,		\	abort:          t128_abort,			\	reset:          t128_reset,			\	bios_param:     t128_biosparam,			\	can_queue:      CAN_QUEUE,			\        this_id:        7,				\	sg_tablesize:   SG_ALL,				\	cmd_per_lun:    CMD_PER_LUN,			\	use_clustering: DISABLE_CLUSTERING}#ifndef HOSTS_C#define NCR5380_implementation_fields \    unsigned long base#define NCR5380_local_declare() \    unsigned long base#define NCR5380_setup(instance) \    base = (instance)->base#define T128_address(reg) (base + T_5380_OFFSET + ((reg) * 0x20))#if !(TDEBUG & TDEBUG_TRANSFER) #define NCR5380_read(reg) isa_readb(T128_address(reg))#define NCR5380_write(reg, value) isa_writeb((value),(T128_address(reg)))#else#define NCR5380_read(reg)						\    (((unsigned char) printk("scsi%d : read register %d at address %08x\n"\    , instance->hostno, (reg), T128_address(reg))), isa_readb(T128_address(reg)))#define NCR5380_write(reg, value) {					\    printk("scsi%d : write %02x to register %d at address %08x\n", 	\	    instance->hostno, (value), (reg), T128_address(reg));	\    isa_writeb((value), (T128_address(reg)));				\}#endif#define NCR5380_intr t128_intr#define do_NCR5380_intr do_t128_intr#define NCR5380_queue_command t128_queue_command#define NCR5380_abort t128_abort#define NCR5380_reset t128_reset#define NCR5380_proc_info t128_proc_info/* 15 14 12 10 7 5 3    1101 0100 1010 1000 */   #define T128_IRQS 0xc4a8 #endif /* else def HOSTS_C */#endif /* ndef ASM */#endif /* T128_H */