?? sjcd.h
字號:
/* * Definitions for a Sanyo CD-ROM interface. * * Copyright (C) 1995 Vadim V. Model * model@cecmow.enet.dec.com * vadim@rbrf.msk.su * vadim@ipsun.ras.ru * Eric van der Maarel * H.T.M.v.d.Maarel@marin.nl * * This information is based on mcd.c from M. Harriss and sjcd102.lst from * E. Moenkeberg. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */#ifndef __SJCD_H__#define __SJCD_H__/* * Change this to set the I/O port address as default. More flexibility * come with setup implementation. */#define SJCD_BASE_ADDR 0x340/* * Change this to set the irq as default. Really SANYO do not use interrupts * at all. */#define SJCD_INTR_NR 0/* * Change this to set the dma as default value. really SANYO does not use * direct memory access at all. */#define SJCD_DMA_NR 0/* * Macros which allow us to find out the status of the drive. */#define SJCD_STATUS_AVAILABLE( x ) (((x)&0x02)==0)#define SJCD_DATA_AVAILABLE( x ) (((x)&0x01)==0)/* * Port access macro. Three ports are available: S-data port (command port), * status port (read only) and D-data port (read only). */#define SJCDPORT( x ) ( sjcd_base + ( x ) )#define SJCD_STATUS_PORT SJCDPORT( 1 )#define SJCD_S_DATA_PORT SJCDPORT( 0 )#define SJCD_COMMAND_PORT SJCDPORT( 0 )#define SJCD_D_DATA_PORT SJCDPORT( 2 )/* * Drive info bits. Drive info available as first (mandatory) byte of * command completion status. */#define SST_NOT_READY 0x10 /* no disk in the drive (???) */#define SST_MEDIA_CHANGED 0x20 /* disk is changed */#define SST_DOOR_OPENED 0x40 /* door is open *//* commands */#define SCMD_EJECT_TRAY 0xD0 /* eject tray if not locked */#define SCMD_LOCK_TRAY 0xD2 /* lock tray when in */#define SCMD_UNLOCK_TRAY 0xD4 /* unlock tray when in */#define SCMD_CLOSE_TRAY 0xD6 /* load tray in */#define SCMD_RESET 0xFA /* soft reset */#define SCMD_GET_STATUS 0x80#define SCMD_GET_VERSION 0xCC#define SCMD_DATA_READ 0xA0 /* are the same, depend on mode&args */#define SCMD_SEEK 0xA0#define SCMD_PLAY 0xA0#define SCMD_GET_QINFO 0xA8#define SCMD_SET_MODE 0xC4#define SCMD_MODE_PLAY 0xE0#define SCMD_MODE_COOKED (0xF8 & ~0x20)#define SCMD_MODE_RAW 0xF9#define SCMD_MODE_x20_BIT 0x20 /* What is it for ? */#define SCMD_SET_VOLUME 0xAE#define SCMD_PAUSE 0xE0#define SCMD_STOP 0xE0#define SCMD_GET_DISK_INFO 0xAA/* * Some standard arguments for SCMD_GET_DISK_INFO. */#define SCMD_GET_1_TRACK 0xA0 /* get the first track information */#define SCMD_GET_L_TRACK 0xA1 /* get the last track information */#define SCMD_GET_D_SIZE 0xA2 /* get the whole disk information *//* * Borrowed from hd.c. Allows to optimize multiple port read commands. */#define S_READ_DATA( port, buf, nr ) insb( port, buf, nr )/* * We assume that there are no audio disks with TOC length more than this * number (I personally have never seen disks with more than 20 fragments). */#define SJCD_MAX_TRACKS 100struct msf { unsigned char min; unsigned char sec; unsigned char frame;};struct sjcd_hw_disk_info { unsigned char track_control; unsigned char track_no; unsigned char x, y, z; union { unsigned char track_no; struct msf track_msf; } un;};struct sjcd_hw_qinfo { unsigned char track_control; unsigned char track_no; unsigned char x; struct msf rel; struct msf abs;};struct sjcd_play_msf { struct msf start; struct msf end;};struct sjcd_disk_info { unsigned char first; unsigned char last; struct msf disk_length; struct msf first_track;};struct sjcd_toc { unsigned char ctrl_addr; unsigned char track; unsigned char point_index; struct msf track_time; struct msf disk_time;};#if defined( SJCD_GATHER_STAT )struct sjcd_stat { int ticks; int tticks[ 8 ]; int idle_ticks; int start_ticks; int mode_ticks; int read_ticks; int data_ticks; int stop_ticks; int stopping_ticks;};#endif#endif
?? 快捷鍵說明
復(fù)制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -