?? altsyncram_0hq1.tdf
字號:
--altsyncram ADDRESS_REG_B="CLOCK1" BYTE_SIZE=8 CBX_DECLARE_ALL_CONNECTED_PORTS="OFF" CLOCK_ENABLE_INPUT_A="NORMAL" CLOCK_ENABLE_INPUT_B="NORMAL" CYCLONEII_M4K_COMPATIBILITY="ON" CYCLONEII_SAFE_WRITE="NO_CHANGE" DEVICE_FAMILY="Cyclone II" LOW_POWER_MODE="AUTO" MAXIMUM_DEPTH=0 NUMWORDS_A=0 NUMWORDS_B=0 OPERATION_MODE="BIDIR_DUAL_PORT" POWER_UP_UNINITIALIZED="FALSE" RAM_BLOCK_TYPE="AUTO" WIDTH_A=37 WIDTH_B=37 WIDTH_BYTEENA_A=1 WIDTH_BYTEENA_B=1 WIDTHAD_A=11 WIDTHAD_B=11 WRCONTROL_WRADDRESS_REG_B="CLOCK1" address_a address_b clock0 clock1 clocken0 clocken1 data_a data_b q_a wren_a wren_b CARRY_CHAIN="MANUAL" CARRY_CHAIN_LENGTH=48
--VERSION_BEGIN 8.0SP1 cbx_altsyncram 2008:06:16:296212 cbx_cycloneii 2008:06:02:292401 cbx_lpm_add_sub 2008:06:02:292401 cbx_lpm_compare 2008:06:02:292401 cbx_lpm_decode 2008:06:02:292401 cbx_lpm_mux 2008:06:02:292401 cbx_mgl 2008:06:02:292401 cbx_stratix 2008:06:02:292401 cbx_stratixii 2008:06:02:292401 cbx_stratixiii 2008:06:18:296807 cbx_util_mgl 2008:06:02:292401 VERSION_END
-- Copyright (C) 1991-2008 Altera Corporation
-- Your use of Altera Corporation's design tools, logic functions
-- and other software and tools, and its AMPP partner logic
-- functions, and any output files from any of the foregoing
-- (including device programming or simulation files), and any
-- associated documentation or information are expressly subject
-- to the terms and conditions of the Altera Program License
-- Subscription Agreement, Altera MegaCore Function License
-- Agreement, or other applicable license agreement, including,
-- without limitation, that your use is for the sole purpose of
-- programming logic devices manufactured by Altera and sold by
-- Altera or its authorized distributors. Please refer to the
-- applicable agreement for further details.
FUNCTION cycloneii_ram_block (clk0, clk1, clr0, clr1, ena0, ena1, portaaddr[PORT_A_ADDRESS_WIDTH-1..0], portaaddrstall, portabyteenamasks[PORT_A_BYTE_ENABLE_MASK_WIDTH-1..0], portadatain[PORT_A_DATA_WIDTH-1..0], portawe, portbaddr[PORT_B_ADDRESS_WIDTH-1..0], portbaddrstall, portbbyteenamasks[PORT_B_BYTE_ENABLE_MASK_WIDTH-1..0], portbdatain[PORT_B_DATA_WIDTH-1..0], portbrewe)
WITH ( CONNECTIVITY_CHECKING, DATA_INTERLEAVE_OFFSET_IN_BITS, DATA_INTERLEAVE_WIDTH_IN_BITS, DONT_POWER_OPTIMIZE, INIT_FILE, INIT_FILE_LAYOUT, init_file_restructured, LOGICAL_RAM_NAME, mem_init0, mem_init1, MIXED_PORT_FEED_THROUGH_MODE, OPERATION_MODE, PORT_A_ADDRESS_WIDTH = 1, PORT_A_BYTE_ENABLE_MASK_WIDTH = 1, PORT_A_BYTE_SIZE, PORT_A_DATA_OUT_CLEAR, PORT_A_DATA_OUT_CLOCK, PORT_A_DATA_WIDTH = 1, PORT_A_DISABLE_CE_ON_INPUT_REGISTERS, PORT_A_DISABLE_CE_ON_OUTPUT_REGISTERS, PORT_A_FIRST_ADDRESS, PORT_A_FIRST_BIT_NUMBER, PORT_A_LAST_ADDRESS, PORT_A_LOGICAL_RAM_DEPTH, PORT_A_LOGICAL_RAM_WIDTH, PORT_B_ADDRESS_CLOCK, PORT_B_ADDRESS_WIDTH = 1, PORT_B_BYTE_ENABLE_CLOCK, PORT_B_BYTE_ENABLE_MASK_WIDTH = 1, PORT_B_BYTE_SIZE, PORT_B_DATA_IN_CLOCK, PORT_B_DATA_OUT_CLEAR, PORT_B_DATA_OUT_CLOCK, PORT_B_DATA_WIDTH = 1, PORT_B_DISABLE_CE_ON_INPUT_REGISTERS, PORT_B_DISABLE_CE_ON_OUTPUT_REGISTERS, PORT_B_FIRST_ADDRESS, PORT_B_FIRST_BIT_NUMBER, PORT_B_LAST_ADDRESS, PORT_B_LOGICAL_RAM_DEPTH, PORT_B_LOGICAL_RAM_WIDTH, PORT_B_READ_ENABLE_WRITE_ENABLE_CLOCK, POWER_UP_UNINITIALIZED, RAM_BLOCK_TYPE, SAFE_WRITE)
RETURNS ( portadataout[PORT_A_DATA_WIDTH-1..0], portbdataout[PORT_B_DATA_WIDTH-1..0]);
--synthesis_resources = M4K 19
OPTIONS ALTERA_INTERNAL_OPTION = "OPTIMIZE_POWER_DURING_SYNTHESIS=NORMAL_COMPILATION";
SUBDESIGN altsyncram_0hq1
(
address_a[10..0] : input;
address_b[10..0] : input;
clock0 : input;
clock1 : input;
clocken0 : input;
clocken1 : input;
data_a[36..0] : input;
data_b[36..0] : input;
q_a[36..0] : output;
q_b[36..0] : output;
wren_a : input;
wren_b : input;
)
VARIABLE
ram_block2a0 : cycloneii_ram_block
WITH (
CONNECTIVITY_CHECKING = "OFF",
LOGICAL_RAM_NAME = "ALTSYNCRAM",
MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
OPERATION_MODE = "bidir_dual_port",
PORT_A_ADDRESS_WIDTH = 11,
PORT_A_DATA_WIDTH = 1,
PORT_A_DISABLE_CE_ON_INPUT_REGISTERS = "off",
PORT_A_DISABLE_CE_ON_OUTPUT_REGISTERS = "on",
PORT_A_FIRST_ADDRESS = 0,
PORT_A_FIRST_BIT_NUMBER = 0,
PORT_A_LAST_ADDRESS = 2047,
PORT_A_LOGICAL_RAM_DEPTH = 2048,
PORT_A_LOGICAL_RAM_WIDTH = 37,
PORT_B_ADDRESS_CLOCK = "clock1",
PORT_B_ADDRESS_WIDTH = 11,
PORT_B_DATA_IN_CLOCK = "clock1",
PORT_B_DATA_WIDTH = 1,
PORT_B_DISABLE_CE_ON_INPUT_REGISTERS = "off",
PORT_B_DISABLE_CE_ON_OUTPUT_REGISTERS = "on",
PORT_B_FIRST_ADDRESS = 0,
PORT_B_FIRST_BIT_NUMBER = 0,
PORT_B_LAST_ADDRESS = 2047,
PORT_B_LOGICAL_RAM_DEPTH = 2048,
PORT_B_LOGICAL_RAM_WIDTH = 37,
PORT_B_READ_ENABLE_WRITE_ENABLE_CLOCK = "clock1",
POWER_UP_UNINITIALIZED = "false",
RAM_BLOCK_TYPE = "AUTO"
);
ram_block2a1 : cycloneii_ram_block
WITH (
CONNECTIVITY_CHECKING = "OFF",
LOGICAL_RAM_NAME = "ALTSYNCRAM",
MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
OPERATION_MODE = "bidir_dual_port",
PORT_A_ADDRESS_WIDTH = 11,
PORT_A_DATA_WIDTH = 1,
PORT_A_DISABLE_CE_ON_INPUT_REGISTERS = "off",
PORT_A_DISABLE_CE_ON_OUTPUT_REGISTERS = "on",
PORT_A_FIRST_ADDRESS = 0,
PORT_A_FIRST_BIT_NUMBER = 1,
PORT_A_LAST_ADDRESS = 2047,
PORT_A_LOGICAL_RAM_DEPTH = 2048,
PORT_A_LOGICAL_RAM_WIDTH = 37,
PORT_B_ADDRESS_CLOCK = "clock1",
PORT_B_ADDRESS_WIDTH = 11,
PORT_B_DATA_IN_CLOCK = "clock1",
PORT_B_DATA_WIDTH = 1,
PORT_B_DISABLE_CE_ON_INPUT_REGISTERS = "off",
PORT_B_DISABLE_CE_ON_OUTPUT_REGISTERS = "on",
PORT_B_FIRST_ADDRESS = 0,
PORT_B_FIRST_BIT_NUMBER = 1,
PORT_B_LAST_ADDRESS = 2047,
PORT_B_LOGICAL_RAM_DEPTH = 2048,
PORT_B_LOGICAL_RAM_WIDTH = 37,
PORT_B_READ_ENABLE_WRITE_ENABLE_CLOCK = "clock1",
POWER_UP_UNINITIALIZED = "false",
RAM_BLOCK_TYPE = "AUTO"
);
ram_block2a2 : cycloneii_ram_block
WITH (
CONNECTIVITY_CHECKING = "OFF",
LOGICAL_RAM_NAME = "ALTSYNCRAM",
MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
OPERATION_MODE = "bidir_dual_port",
PORT_A_ADDRESS_WIDTH = 11,
PORT_A_DATA_WIDTH = 1,
PORT_A_DISABLE_CE_ON_INPUT_REGISTERS = "off",
PORT_A_DISABLE_CE_ON_OUTPUT_REGISTERS = "on",
PORT_A_FIRST_ADDRESS = 0,
PORT_A_FIRST_BIT_NUMBER = 2,
PORT_A_LAST_ADDRESS = 2047,
PORT_A_LOGICAL_RAM_DEPTH = 2048,
PORT_A_LOGICAL_RAM_WIDTH = 37,
PORT_B_ADDRESS_CLOCK = "clock1",
PORT_B_ADDRESS_WIDTH = 11,
PORT_B_DATA_IN_CLOCK = "clock1",
PORT_B_DATA_WIDTH = 1,
PORT_B_DISABLE_CE_ON_INPUT_REGISTERS = "off",
PORT_B_DISABLE_CE_ON_OUTPUT_REGISTERS = "on",
PORT_B_FIRST_ADDRESS = 0,
PORT_B_FIRST_BIT_NUMBER = 2,
PORT_B_LAST_ADDRESS = 2047,
PORT_B_LOGICAL_RAM_DEPTH = 2048,
PORT_B_LOGICAL_RAM_WIDTH = 37,
PORT_B_READ_ENABLE_WRITE_ENABLE_CLOCK = "clock1",
POWER_UP_UNINITIALIZED = "false",
RAM_BLOCK_TYPE = "AUTO"
);
ram_block2a3 : cycloneii_ram_block
WITH (
CONNECTIVITY_CHECKING = "OFF",
LOGICAL_RAM_NAME = "ALTSYNCRAM",
MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
OPERATION_MODE = "bidir_dual_port",
PORT_A_ADDRESS_WIDTH = 11,
PORT_A_DATA_WIDTH = 1,
PORT_A_DISABLE_CE_ON_INPUT_REGISTERS = "off",
PORT_A_DISABLE_CE_ON_OUTPUT_REGISTERS = "on",
PORT_A_FIRST_ADDRESS = 0,
PORT_A_FIRST_BIT_NUMBER = 3,
PORT_A_LAST_ADDRESS = 2047,
PORT_A_LOGICAL_RAM_DEPTH = 2048,
PORT_A_LOGICAL_RAM_WIDTH = 37,
PORT_B_ADDRESS_CLOCK = "clock1",
PORT_B_ADDRESS_WIDTH = 11,
PORT_B_DATA_IN_CLOCK = "clock1",
PORT_B_DATA_WIDTH = 1,
PORT_B_DISABLE_CE_ON_INPUT_REGISTERS = "off",
PORT_B_DISABLE_CE_ON_OUTPUT_REGISTERS = "on",
PORT_B_FIRST_ADDRESS = 0,
PORT_B_FIRST_BIT_NUMBER = 3,
PORT_B_LAST_ADDRESS = 2047,
PORT_B_LOGICAL_RAM_DEPTH = 2048,
PORT_B_LOGICAL_RAM_WIDTH = 37,
PORT_B_READ_ENABLE_WRITE_ENABLE_CLOCK = "clock1",
POWER_UP_UNINITIALIZED = "false",
RAM_BLOCK_TYPE = "AUTO"
);
ram_block2a4 : cycloneii_ram_block
WITH (
CONNECTIVITY_CHECKING = "OFF",
LOGICAL_RAM_NAME = "ALTSYNCRAM",
MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
OPERATION_MODE = "bidir_dual_port",
PORT_A_ADDRESS_WIDTH = 11,
PORT_A_DATA_WIDTH = 1,
PORT_A_DISABLE_CE_ON_INPUT_REGISTERS = "off",
PORT_A_DISABLE_CE_ON_OUTPUT_REGISTERS = "on",
PORT_A_FIRST_ADDRESS = 0,
PORT_A_FIRST_BIT_NUMBER = 4,
PORT_A_LAST_ADDRESS = 2047,
PORT_A_LOGICAL_RAM_DEPTH = 2048,
PORT_A_LOGICAL_RAM_WIDTH = 37,
PORT_B_ADDRESS_CLOCK = "clock1",
PORT_B_ADDRESS_WIDTH = 11,
PORT_B_DATA_IN_CLOCK = "clock1",
PORT_B_DATA_WIDTH = 1,
PORT_B_DISABLE_CE_ON_INPUT_REGISTERS = "off",
PORT_B_DISABLE_CE_ON_OUTPUT_REGISTERS = "on",
PORT_B_FIRST_ADDRESS = 0,
PORT_B_FIRST_BIT_NUMBER = 4,
PORT_B_LAST_ADDRESS = 2047,
PORT_B_LOGICAL_RAM_DEPTH = 2048,
PORT_B_LOGICAL_RAM_WIDTH = 37,
PORT_B_READ_ENABLE_WRITE_ENABLE_CLOCK = "clock1",
POWER_UP_UNINITIALIZED = "false",
RAM_BLOCK_TYPE = "AUTO"
);
ram_block2a5 : cycloneii_ram_block
WITH (
CONNECTIVITY_CHECKING = "OFF",
LOGICAL_RAM_NAME = "ALTSYNCRAM",
MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
OPERATION_MODE = "bidir_dual_port",
PORT_A_ADDRESS_WIDTH = 11,
PORT_A_DATA_WIDTH = 1,
PORT_A_DISABLE_CE_ON_INPUT_REGISTERS = "off",
PORT_A_DISABLE_CE_ON_OUTPUT_REGISTERS = "on",
PORT_A_FIRST_ADDRESS = 0,
PORT_A_FIRST_BIT_NUMBER = 5,
PORT_A_LAST_ADDRESS = 2047,
PORT_A_LOGICAL_RAM_DEPTH = 2048,
PORT_A_LOGICAL_RAM_WIDTH = 37,
PORT_B_ADDRESS_CLOCK = "clock1",
PORT_B_ADDRESS_WIDTH = 11,
PORT_B_DATA_IN_CLOCK = "clock1",
PORT_B_DATA_WIDTH = 1,
PORT_B_DISABLE_CE_ON_INPUT_REGISTERS = "off",
PORT_B_DISABLE_CE_ON_OUTPUT_REGISTERS = "on",
PORT_B_FIRST_ADDRESS = 0,
PORT_B_FIRST_BIT_NUMBER = 5,
PORT_B_LAST_ADDRESS = 2047,
PORT_B_LOGICAL_RAM_DEPTH = 2048,
PORT_B_LOGICAL_RAM_WIDTH = 37,
PORT_B_READ_ENABLE_WRITE_ENABLE_CLOCK = "clock1",
POWER_UP_UNINITIALIZED = "false",
RAM_BLOCK_TYPE = "AUTO"
);
ram_block2a6 : cycloneii_ram_block
WITH (
CONNECTIVITY_CHECKING = "OFF",
LOGICAL_RAM_NAME = "ALTSYNCRAM",
MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
OPERATION_MODE = "bidir_dual_port",
PORT_A_ADDRESS_WIDTH = 11,
PORT_A_DATA_WIDTH = 1,
PORT_A_DISABLE_CE_ON_INPUT_REGISTERS = "off",
PORT_A_DISABLE_CE_ON_OUTPUT_REGISTERS = "on",
PORT_A_FIRST_ADDRESS = 0,
PORT_A_FIRST_BIT_NUMBER = 6,
PORT_A_LAST_ADDRESS = 2047,
PORT_A_LOGICAL_RAM_DEPTH = 2048,
PORT_A_LOGICAL_RAM_WIDTH = 37,
PORT_B_ADDRESS_CLOCK = "clock1",
PORT_B_ADDRESS_WIDTH = 11,
PORT_B_DATA_IN_CLOCK = "clock1",
PORT_B_DATA_WIDTH = 1,
PORT_B_DISABLE_CE_ON_INPUT_REGISTERS = "off",
PORT_B_DISABLE_CE_ON_OUTPUT_REGISTERS = "on",
PORT_B_FIRST_ADDRESS = 0,
PORT_B_FIRST_BIT_NUMBER = 6,
PORT_B_LAST_ADDRESS = 2047,
PORT_B_LOGICAL_RAM_DEPTH = 2048,
PORT_B_LOGICAL_RAM_WIDTH = 37,
PORT_B_READ_ENABLE_WRITE_ENABLE_CLOCK = "clock1",
POWER_UP_UNINITIALIZED = "false",
RAM_BLOCK_TYPE = "AUTO"
);
ram_block2a7 : cycloneii_ram_block
WITH (
CONNECTIVITY_CHECKING = "OFF",
LOGICAL_RAM_NAME = "ALTSYNCRAM",
MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
OPERATION_MODE = "bidir_dual_port",
PORT_A_ADDRESS_WIDTH = 11,
PORT_A_DATA_WIDTH = 1,
PORT_A_DISABLE_CE_ON_INPUT_REGISTERS = "off",
PORT_A_DISABLE_CE_ON_OUTPUT_REGISTERS = "on",
PORT_A_FIRST_ADDRESS = 0,
PORT_A_FIRST_BIT_NUMBER = 7,
PORT_A_LAST_ADDRESS = 2047,
PORT_A_LOGICAL_RAM_DEPTH = 2048,
PORT_A_LOGICAL_RAM_WIDTH = 37,
PORT_B_ADDRESS_CLOCK = "clock1",
PORT_B_ADDRESS_WIDTH = 11,
PORT_B_DATA_IN_CLOCK = "clock1",
PORT_B_DATA_WIDTH = 1,
PORT_B_DISABLE_CE_ON_INPUT_REGISTERS = "off",
PORT_B_DISABLE_CE_ON_OUTPUT_REGISTERS = "on",
PORT_B_FIRST_ADDRESS = 0,
PORT_B_FIRST_BIT_NUMBER = 7,
PORT_B_LAST_ADDRESS = 2047,
PORT_B_LOGICAL_RAM_DEPTH = 2048,
PORT_B_LOGICAL_RAM_WIDTH = 37,
PORT_B_READ_ENABLE_WRITE_ENABLE_CLOCK = "clock1",
POWER_UP_UNINITIALIZED = "false",
RAM_BLOCK_TYPE = "AUTO"
);
ram_block2a8 : cycloneii_ram_block
WITH (
CONNECTIVITY_CHECKING = "OFF",
LOGICAL_RAM_NAME = "ALTSYNCRAM",
MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
OPERATION_MODE = "bidir_dual_port",
PORT_A_ADDRESS_WIDTH = 11,
PORT_A_DATA_WIDTH = 1,
PORT_A_DISABLE_CE_ON_INPUT_REGISTERS = "off",
PORT_A_DISABLE_CE_ON_OUTPUT_REGISTERS = "on",
PORT_A_FIRST_ADDRESS = 0,
PORT_A_FIRST_BIT_NUMBER = 8,
PORT_A_LAST_ADDRESS = 2047,
PORT_A_LOGICAL_RAM_DEPTH = 2048,
PORT_A_LOGICAL_RAM_WIDTH = 37,
PORT_B_ADDRESS_CLOCK = "clock1",
PORT_B_ADDRESS_WIDTH = 11,
PORT_B_DATA_IN_CLOCK = "clock1",
PORT_B_DATA_WIDTH = 1,
PORT_B_DISABLE_CE_ON_INPUT_REGISTERS = "off",
PORT_B_DISABLE_CE_ON_OUTPUT_REGISTERS = "on",
PORT_B_FIRST_ADDRESS = 0,
PORT_B_FIRST_BIT_NUMBER = 8,
PORT_B_LAST_ADDRESS = 2047,
PORT_B_LOGICAL_RAM_DEPTH = 2048,
PORT_B_LOGICAL_RAM_WIDTH = 37,
PORT_B_READ_ENABLE_WRITE_ENABLE_CLOCK = "clock1",
POWER_UP_UNINITIALIZED = "false",
RAM_BLOCK_TYPE = "AUTO"
);
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -