//未使用的函數建議注釋掉,同時把頭文件里的函數定義注釋掉






 
 




/* ADC */


/* Analog Comparator */


/* USART */


/* SPI */



/* EEPROM */


/* Watchdog Timer Control Register */

/* Timer/Counter 2 */

/* Timer/Counter 1 */


/* Special Function I/O register */



/* Timer/Counter 0 */

/* MCU general */

/* SPM Conrol Register */

/* Timer/Counter Interrupts */

/* General Interrupts */





/* Port A bits */



/* Port B bits */



/* Port C bits */



/* Port D bits */




/* Lock and Fuse Bits with LPM/SPM instructions */

/* lock bits */

/* fuses low bits */

/* fuses high bits */

 
 
 

typedef unsigned char  uchar;			/* 定義可移植的無符號8位整數關鍵字    */
typedef signed   char  schar;			/* 定義可移植的有符號8位整數關鍵字    */
typedef unsigned int   uint;			/* 定義可移植的無符號16位整數關鍵字   */
typedef signed   int   sint;			/* 定義可移植的有符號16位整數關鍵字   */
typedef unsigned long  ulong;			/* 定義可移植的無符號32位整數關鍵字   */
typedef signed   long  slong;			/* 定義可移植的有符號32位整數關鍵字   */

// CodeVisionAVR C Compiler
// (C) 1998-2001 Pavel Haiduc, HP InfoTech S.R.L.

// I/O registers definitions for the ATmega16


#pragma used+
sfrb TWBR=0;
sfrb TWSR=1;
sfrb TWAR=2;
sfrb TWDR=3;
sfrb ADCL=4;
sfrb ADCH=5;
sfrw ADCW=4;      // 16 bit access
sfrb ADCSRA=6;
sfrb ADMUX=7;
sfrb ACSR=8;
sfrb UBRRL=9;
sfrb UCSRB=0xa;
sfrb UCSRA=0xb;
sfrb UDR=0xc;
sfrb SPCR=0xd;
sfrb SPSR=0xe;
sfrb SPDR=0xf;
sfrb PIND=0x10;
sfrb DDRD=0x11;
sfrb PORTD=0x12;
sfrb PINC=0x13;
sfrb DDRC=0x14;
sfrb PORTC=0x15;
sfrb PINB=0x16;
sfrb DDRB=0x17;
sfrb PORTB=0x18;
sfrb PINA=0x19;
sfrb DDRA=0x1a;
sfrb PORTA=0x1b;
sfrb EECR=0x1c;
sfrb EEDR=0x1d;
sfrb EEARL=0x1e;
sfrb EEARH=0x1f;
sfrw EEAR=0x1e;   // 16 bit access
sfrb UBRRH=0x20;
sfrb UCSRC=0X20;
sfrb WDTCR=0x21;
sfrb ASSR=0x22;
sfrb OCR2=0x23;
sfrb TCNT2=0x24;
sfrb TCCR2=0x25;
sfrb ICR1L=0x26;
sfrb ICR1H=0x27;
sfrb OCR1BL=0x28;
sfrb OCR1BH=0x29;
sfrw OCR1B=0x28;  // 16 bit access
sfrb OCR1AL=0x2a;
sfrb OCR1AH=0x2b;
sfrw OCR1A=0x2a;  // 16 bit access
sfrb TCNT1L=0x2c;
sfrb TCNT1H=0x2d;
sfrw TCNT1=0x2c;  // 16 bit access
sfrb TCCR1B=0x2e;
sfrb TCCR1A=0x2f;
sfrb SFIOR=0x30;
sfrb OSCCAL=0x31;
sfrb OCDR=0x31;
sfrb TCNT0=0x32;
sfrb TCCR0=0x33;
sfrb MCUCSR=0x34;
sfrb MCUCR=0x35;
sfrb TWCR=0x36;
sfrb SPMCR=0x37;
sfrb TIFR=0x38;
sfrb TIMSK=0x39;
sfrb GIFR=0x3a;
sfrb GICR=0x3b;
sfrb OCR0=0X3c;
sfrb SPL=0x3d;
sfrb SPH=0x3e;
sfrb SREG=0x3f;
#pragma used-

// Interrupt vectors definitions


// Needed by the power management functions (sleep.h)
#asm
	#ifndef __SLEEP_DEFINED__
	#define __SLEEP_DEFINED__
	.EQU __se_bit=0x40
	.EQU __sm_mask=0xB0
	.EQU __sm_powerdown=0x20
	.EQU __sm_powersave=0x30
	.EQU __sm_standby=0xA0
	.EQU __sm_ext_standby=0xB0
	.EQU __sm_adc_noise_red=0x10
	.SET power_ctrl_reg=mcucr
	#endif
#endasm



extern unsigned char TWI_Send(uchar Slave,uchar Address,uchar Data);
//extern unsigned char TWI_SendStr(unsigned char Slave,unsigned char Address,unsigned char *Array,unsigned char CNT);
extern unsigned char TWI_Receive(unsigned char Slave,unsigned char Address);
// CodeVisionAVR C Compiler
// (C) 1998-2000 Pavel Haiduc, HP InfoTech S.R.L.


#pragma used+

void delay_us(unsigned int n);
void delay_ms(unsigned int n);

#pragma used-


extern  void Init_IO ( void );
extern  void  Init_T1(  void );
extern  void Init_T0( void );
extern  void Init_T2( void );
extern  void Init_device( void ) ;
extern  void Init_TWI(void); 

//extern    unsigned char Read_PCF8563T(unsigned char Address);
extern    void Write_PCF8563T(unsigned char Address , char date);
extern   void start_PCF( void );
extern    char Read_sec( void);
extern   char Read_miu( void );


void LCD_init(void);
void LCD_clear(void);
void LCD_write_str(unsigned char X,unsigned char Y,unsigned char flash *s);
void LCD_write_char(unsigned char X,unsigned char Y,unsigned char data);
void LCD_write_com(unsigned char com);
//void CursorScroll(void);  
//void ScreenScroll(void);





 /* uchar Read_PCF8563T(uchar Address)
 {
   uchar temp;
   temp=TWI_Receive(0xA2, Address);
   return temp;
 }  */
 
  void Write_PCF8563T(uchar Address , uchar date)
 {
 	 
  TWI_Send(0xA2, Address, date); 
	 
 } 
void start_PCF( void )
{
 Write_PCF8563T( 0X00   , 0x00 );
 delay_ms(2);
 Write_PCF8563T( 0X02 , 0x00 ); 
 delay_ms(2);
 Write_PCF8563T( 0X03 , 0x00 );
}

uchar Read_sec( void )
{
   uchar temp;
   temp=TWI_Receive(0xA2, 0X02);
   return temp;         
}                                               
uchar Read_miu( void )
{
   uchar temp;
   temp=TWI_Receive(0xA2, 0X03);
   return temp;
}