//-----------------------------------------------------------------------
//PCA模塊8位PWM輸出DEMO
//PWM輸出腳為P1.6
//------------------------------------------------------------------------
// Includes
//------------------------------------------------------------------------

#include <c8051f320.h>                 // SFR declarations
#include <INTRINS.H>
#include <stdio.h>

//------------------------------------------------------------------------
//------------------------------------------------------------------------
void PORT_Init (void);
void PCA_Init (void);
void PCA_ISR (void);
//------------------------------------------------------------------------
// MAIN Routine
//------------------------------------------------------------------------
void main (void)
{	
	unsigned long b;
	 
                                        /*關看門狗*/
   PCA0MD &= ~0x40;                     // WDTE = 0 (watchdog timer enable bit)
   OSCICN |= 0x03;                      // Set internal oscillator to highest
                                        // setting (120000000)
	
   	PORT_Init ();			            /*初始化I/O口*/
   	PCA_Init ();				        /*PCA初始化成8位脈寬調置方式*/
    EIE1= 0x10;
	EA=1;
	PCA0CPH0=0x20;
   	while (1)      
	{
		
		for(b=0;b>0xffffffff;b++)       //延時
		{
			_nop_();
		}	
	}
}
//-------------------------------------------------------------------------
//配置I/O端口
void PORT_Init (void)
{  P0SKIP =0xff;
   P1SKIP = 0x3f;
   XBR1 = 0x42;			                /*CEX0-->P1.6*/

   P1MDOUT |= 0x40;                     /*使能P0.0腳推挽輸出*/
}
//-------------------------------------------------------------------------
//配置PCA的CEX0輸出8位PWM信號
void PCA_Init (void)
{
    PCA0CN    = 0x40;
    PCA0CPM0  = 0x42;
    PCA0CPL0  = 0x00;
    PCA0CPH0  = 0x00;
	PCA0CPL4  = 0x00;
	PCA0MD   &= 0x40;
	PCA0MD    = 0x01;
}
//-------------------------------------------------------------------------
void PCA_ISR (void) interrupt 11
{     unsigned char a ;
      bit	PWM_PAC;
      CF = 0;
      if(PWM_PAC==0)			         //占空比由0	>>0xfe
		{
			PCA0CPH0=a;
		 	a++;
		 	if(a==0xfe){PWM_PAC=1;}
		}
		else					        //占空比由0xfe	>>0
		{
			PCA0CPH0=a;
		 	a--;
		 	if(a==0){PWM_PAC=0;}
		}
}
//------------------------------------------------------------------------
//end of file