?? scheduler.i
字號:
#line 1 "System\scheduler.c" /0 #line 1 "system\reg51.h" /0 sfr P0 = 0x80; sbit P0_0 = P0^0; sbit P0_1 = P0^1; sbit P0_2 = P0^2; sbit P0_3 = P0^3; sbit P0_4 = P0^4; sbit P0_5 = P0^5; sbit P0_6 = P0^6; sbit P0_7 = P0^7; sfr P1 = 0x90; sbit P1_0 = P1^0; sbit P1_1 = P1^1; sbit P1_2 = P1^2; sbit P1_3 = P1^3; sbit P1_4 = P1^4; sbit P1_5 = P1^5; sbit P1_6 = P1^6; sbit P1_7 = P1^7; sfr P2 = 0xA0; sbit P2_0 = P2^0; sbit P2_1 = P2^1; sbit P2_2 = P2^2; sbit P2_3 = P2^3; sbit P2_4 = P2^4; sbit P2_5 = P2^5; sbit P2_6 = P2^6; sbit P2_7 = P2^7; sfr P3 = 0xB0; sbit P3_0 = P3^0; sbit P3_1 = P3^1; sbit P3_2 = P3^2; sbit P3_3 = P3^3; sbit P3_4 = P3^4; sbit P3_5 = P3^5; sbit P3_6 = P3^6; sbit P3_7 = P3^7; sfr PSW = 0xD0; sfr ACC = 0xE0; sfr B = 0xF0; sfr SP = 0x81; sfr DPL = 0x82; sfr DPH = 0x83; sfr PCON = 0x87; sfr TCON = 0x88; sfr TMOD = 0x89; sfr TL0 = 0x8A; sfr TL1 = 0x8B; sfr TH0 = 0x8C; sfr TH1 = 0x8D; sfr IE = 0xA8; sfr IP = 0xB8; sfr SCON = 0x98; sfr SBUF = 0x99; sbit CY = 0xD7; sbit AC = 0xD6; sbit F0 = 0xD5; sbit RS1 = 0xD4; sbit RS0 = 0xD3; sbit OV = 0xD2; sbit P = 0xD0; sbit TF1 = 0x8F; sbit TR1 = 0x8E; sbit TF0 = 0x8D; sbit TR0 = 0x8C; sbit IE1 = 0x8B; sbit IT1 = 0x8A; sbit IE0 = 0x89; sbit IT0 = 0x88; sbit EA = 0xAF; sbit ES = 0xAC; sbit ET1 = 0xAB; sbit EX1 = 0xAA; sbit ET0 = 0xA9; sbit EX0 = 0xA8; sbit PS = 0xBC; sbit PT1 = 0xBB; sbit PX1 = 0xBA; sbit PT0 = 0xB9; sbit PX0 = 0xB8; sbit RD = 0xB7; sbit WR = 0xB6; sbit T1 = 0xB5; sbit T0 = 0xB4; sbit INT1 = 0xB3; sbit INT0 = 0xB2; sbit TXD = 0xB1; sbit RXD = 0xB0; sbit SM0 = 0x9F; sbit SM1 = 0x9E; sbit SM2 = 0x9D; sbit REN = 0x9C; sbit TB8 = 0x9B; sbit RB8 = 0x9A; sbit TI = 0x99; sbit RI = 0x98; #line 11 "System\scheduler.c" /0 #line 1 "system\compiler.h" /0 typedef unsigned char Byte; typedef unsigned char Uchar; typedef unsigned int Uint16; typedef int Int16; typedef float Float16; typedef unsigned long int Uint32; typedef long int Int32; #line 12 "System\scheduler.c" /0 #line 1 "system\config.h" /0 #line 171 "system\config.h" /1 #line 177 "system\config.h" /0 #line 13 "System\scheduler.c" /0 #line 1 "SYSTEM\SCHEDULER.H" /0 void sch_timer0_init (void); void sch_scheduler(void); void sch_scheduler_init (void); void DelayX1ms(Byte count); void DelayX10ms(Byte count); void vol_task_init (void); void Touch_task (void); void System_init (void); void Tick_init (void); void I2c_init (void); extern bdata bit gl_key_press; extern bdata bit gl_key_repeat; extern idata Byte gl_key; extern data Byte gl_kbd_tick; extern data Byte gl_cpt_tick; extern data Byte mode_state; extern data int vol_tick; #line 14 "System\scheduler.c" /0 #line 1 "task\kbd_task.h" /0 void ref_mode_task (void); void kbd_task_init (void); void kbd_task(void); bit kbd_process (void); void To_Vol_Dec (void); void DelayX1ms(Byte count); void dts_task(void); void dts_AutoScan (void); void dts_MemWriteFer (void); void dts_MemReadFer (void); void sch_scheduler_init (void); bit Touch_PositionXY (void); Byte Touch_PositionA (void); extern idata Uint16 gl_act_tick; extern bdata bit gl_key_press; extern bdata bit gl_key_repeat; extern bdata bit key_flag; extern idata Byte gl_key; extern data Byte gl_kbd_tick; extern data Byte mode_state; extern data Byte gl_repeat_tick; extern data Byte disp_state; extern data int vol_tick; extern bdata bit vol_flag; extern data Byte vol_value; extern bdata bit DtsMen_flag ; extern data Byte Mem_add; extern data Byte touch_tick; extern idata Byte TouchPad[5];#line 15 "System\scheduler.c" /0 #line 1 "task\disp_task.h" /0 void disp_task_init (void); void disp_task(void); void HT1621_command(Byte bByte); void HT1621_getdata(Byte address,Byte bByte); void ht1621_cls (void); void glht1621_sec(Byte bByte); void glht1621_min(Byte bByte); void glht1621_TRACK(Byte bByte); void glht1621_stop(void); void glht1621_rec(void); void glht1621_volume(void); void dtsFM_DispFer(void); void glht1621_POFF(void); void dts_DispMem (void); extern idata Byte gl_key; extern idata int dts_frequency; extern data Byte disp_state; extern data Byte vol_value; extern bdata bit vol_flag; extern data int vol_tick; extern data Byte disp_tick; #line 16 "System\scheduler.c" /0 #line 1 "task\dts_task.h" /0 void dts_divider (void); void dts_task_init (void); void dts_task(void); void dts_FerInc (void); void dts_FerDec (void); void dts_GetFer (void); void DelayX1ms(Byte count); Byte I2c_ReadByte (Byte address); void I2c_WriteByte (Byte address, Byte bByte); int dts_scanByte(void); void dts_IntToByte (Byte address,int bByte); void dts_MemInit (void); void dts_DispMem (void); void HT1621_getdata(Byte address,Byte bByte); extern Byte code ht1621disp_Map[]; extern idata char DTS_buffer[6]; extern idata int dts_frequency; extern idata int Mem_frequency; extern data Byte Mem_add; extern bdata bit DtsMen_flag ;#line 17 "System\scheduler.c" /0 void sch_scheduler_init (void) { sch_timer0_init(); System_init(); disp_task_init(); DelayX10ms(150); Tick_init();; vol_task_init(); kbd_task_init(); ; dts_task_init(); ; ; } void sch_scheduler (void) { while (1) { disp_task(); ; ; kbd_task(); ; dts_task(); ; ; ; ; } } void sch_timer0_init (void) { TMOD = TMOD |0x01; TL0 = 0xf0; TH0 = 0xd8; IE = IE | 0x82; TR0 = 1; ET0 = 1; EA = 1; } void timer0(void) interrupt 1 using 2 { TL0 = 0xf0; TH0 = 0xd8; gl_cpt_tick++; gl_kbd_tick++; gl_act_tick++; vol_tick++; disp_tick++; touch_tick++; if(gl_cpt_tick> 50){ P1_5 = ~P1_5; gl_cpt_tick = 0; } if(gl_kbd_tick >150) gl_kbd_tick = 0; if(gl_act_tick >150) gl_act_tick = 0; if(vol_tick >1000) vol_tick = 0; if(disp_tick >150) disp_tick = 0; if(touch_tick >150) touch_tick = 0; } void System_init (void) { I2c_init(); DtsMen_flag = 0; Mem_add = 0x10; DtsMen_flag = 0; dts_frequency = 878; gl_kbd_tick = 0x00; gl_cpt_tick = 0x00; gl_act_tick = 0x00; vol_tick = 0x00; disp_tick = 0x00; } void Tick_init (void) { gl_kbd_tick = 0x00; gl_cpt_tick = 0x00; gl_act_tick = 0x00; vol_tick = 0x00; disp_tick = 0x00; touch_tick = 0x00; } ?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -