?? io_drv.lst
字號:
81 =1 #define KEY_4 ((Byte)0x0f) /* 00001111,S16 */
82 =1
83 =1 #define KEY_5 ((Byte)0x1c) /* 00011100,EQ/PROG/MEM */
84 =1 #define KEY_6 ((Byte)0x1a) /* 00011010,RADIO */
85 =1 #define KEY_7 ((Byte)0x16) /* 00010110,CD */
86 =1 #define KEY_8 ((Byte)0x0e) /* 00001110,VOL+ */
87 =1
88 =1 #define KEY_9 ((Byte)0x19) /* 00011001,TAPE */
89 =1 #define KEY_10 ((Byte)0x15) /* 00010101,MAIN POWER */
90 =1 #define KEY_11 ((Byte)0x0d) /* 00001101,VOL- */
91 =1
92 =1 #define KEY_12 ((Byte)0x13) /* 00010011,BAND */
93 =1 #define KEY_13 ((Byte)0x0B) /* 00001011,FF/UP */
94 =1
95 =1 #define KEY_14 ((Byte)0x07) /* 00000111,FR/DOWN */
96 =1
97 =1 #define KEY_REPEAT KEY_0
98 =1 #define KEY_STOP KEY_1
99 =1 #define KEY_ALBUM KEY_2
100 =1 #define KEY_PALY_PAUSE KEY_3
101 =1 #define KEY_S16 KEY_4
102 =1
103 =1 #define KEY_EQ_PROG KEY_5
104 =1 #define KEY_RADIO KEY_6
105 =1 #define KEY_CD KEY_7
106 =1 #define KEY_VOL_INC KEY_8
107 =1
108 =1 #define KEY_TAPE KEY_9
109 =1 #define KEY_MainPower KEY_10
110 =1 #define KEY_VOL_DEC KEY_11
111 =1
112 =1 #define KEY_BAND KEY_12
113 =1 #define KEY_FF KEY_13
114 =1
115 =1 #define KEY_FR KEY_14
116 =1
117 =1 #define Kbd_key_pressed() ((P1&0x1f) != 0x1f)
118 =1
119 =1 /*----- Disp clock task states -----*/
120 =1 #define DISP_IDLE 0
121 =1 #define DISP_INIT 1
122 =1 #define DISP_TICK0 2
123 =1 #define DISP_TICK1 3
124 =1 #define DISP_SEC 4
125 =1 #define DISP_MIN 5
126 =1 #define DISP_MS_BUSY 6
127 =1 #define DISP_PRO 7
128 =1
129 =1 #define KBD_DEBOUNCE_TEMPO 20 /* debounce period: 8 ms */
130 =1 #define KBD_DEBOUNCE_INIT 0
131 =1 #define SCHEDULER_TICK 10
132 =1
133 =1 #define TIM_LOW 0xf0
134 =1 #define TIM_HIGH 0xd8
135 =1 //#define T0_set_TMOD() (TMOD = TMOD | 0x01)
136 =1
137 =1 #define I2C_ID0 0xa0
138 =1 #define I2C_ID1 0xa1
139 =1 #define I2C_ADD 0x00
140 =1
141 =1 /*----- Volume Control Start -----*/
142 =1 #define SC7313_ADD 0x88
C51 COMPILER V8.01 IO_DRV 08/07/2006 11:16:11 PAGE 6
143 =1 #define RADIO_IN 0x5c
144 =1 #define CD_IN 0x59 //01011001
145 =1 #define TAPE_IN 0x5e
146 =1
147 =1 /*----- Touch Pad Control Define -----*/
148 =1 #define TOUCH_REQUEST 0x52
149 =1 #define TOUCH_RETURN 0x53
150 =1
151 =1 #define FWVER_REG 0x00
152 =1 #define BUTTON_REG 0x10
153 =1 #define XY_REG 0x20
154 =1 #define ANGLE_REG 0x30
155 =1 #define TPSEN_REG 0x40
156 =1 #define FWID_REG 0xf0
157 =1
158 =1 /*----- DTS system define -----*/
159 =1 #define Mem_StartAdd 0x10
160 =1 #define Mem_EndAdd 0x1f
161 =1
162 =1 #define Mem_test 0
163 =1 #define Mem_5 5
164 =1 #define Mem_10 10
165 =1 #define DTS_Mem_Size Mem_10
166 =1
167 =1 #define DTS_FreStart 878
168 =1 #define DTS_FreEnd 1080
169 =1
170 =1 #if DTS_Mem_Size == Mem_5
=1 #define Mem_Fre0 878
=1 #define Mem_Fre1 900
=1 #define Mem_Fre2 100
=1 #define Mem_Fre3 960
=1 #define Mem_Fre4 1080
=1 #endif
177 =1
178 =1 #if DTS_Mem_Size == Mem_10
179 =1 #define Mem_Fre0 878
180 =1 #define Mem_Fre1 900
181 =1 #define Mem_Fre2 940
182 =1 #define Mem_Fre3 960
183 =1 #define Mem_Fre4 980
184 =1 #define Mem_Fre5 1000
185 =1 #define Mem_Fre6 1020
186 =1 #define Mem_Fre7 1040
187 =1 #define Mem_Fre8 1060
188 =1 #define Mem_Fre9 1080
189 =1 #endif
14 #include "driver\io_def.h"
1 =1 /*H**************************************************************************
2 =1 * NAME: io_def.h
3 =1 *----------------------------------------------------------------------------
4 =1 * Copyright (c) 2006 Atmel.
5 =1 *----------------------------------------------------------------------------
6 =1 * RELEASE: C51 Sample
7 =1 * REVISION: 1.00
8 =1 *----------------------------------------------------------------------------
9 =1 * PURPOSE:
10 =1 *****************************************************************************/
11 =1
12 =1 /*_____ I N C L U D E S ____________________________________________________*/
13 =1
14 =1
C51 COMPILER V8.01 IO_DRV 08/07/2006 11:16:11 PAGE 7
15 =1 #define DTS_DOUT P3_6
16 =1 #define DTS_DIN P3_4
17 =1 #define DTS_CLK P3_5
18 =1 #define DTS_CE P3_7
19 =1
20 =1 #define MPOWER P3_1
21 =1 #define CDPOWER P1_7
22 =1 #define TAPE_POWER P1_5
23 =1
24 =1 #define LCD_DA P0_0
25 =1 #define LCD_RW P0_1
26 =1 #define LCD_CS P0_2
27 =1
28 =1 #define ISDA P2_1
29 =1 #define ISCL P2_0
30 =1
31 =1 #define TOUCH_SDI P0_3
32 =1 #define TOUCH_SDO P0_4
33 =1 #define TOUCH_SCK P0_5
34 =1 #define TOUCH_SS P0_6
15 #include "driver\kbd_drv.h" /* scheduler definition */
1 =1 /*H**************************************************************************
2 =1 * NAME: kbd_drv.h
3 =1 *----------------------------------------------------------------------------
4 =1 * Copyright (c) 2006 Atmel.
5 =1 *----------------------------------------------------------------------------
6 =1 * RELEASE: C51 Sample
7 =1 * REVISION: 1.00
8 =1 *----------------------------------------------------------------------------
9 =1 * PURPOSE:
10 =1 *****************************************************************************/
11 =1
12 =1 /*_____ I N C L U D E S ____________________________________________________*/
13 =1
14 =1 void kbd_init (void);
15 =1 void kbd_task (void);
16 =1 Byte kbd_decode (void);
17 =1 void dts_FerInc (void);
18 =1 void I2c_WriteByte (Byte address, Byte bByte);
19 =1
20 =1 extern data Byte gl_kbd_tick; /* keyboard tick counter */
21 =1 extern bdata bit key_flag;
22 =1 extern Byte code VOL_Step_Map[];
16
17 /*F**************************************************************************
18 * NAME: getByteLSB
19 *----------------------------------------------------------------------------
20 * PARAMS:
21 * 寫入一個字節數據info
22 * return:
23 *----------------------------------------------------------------------------
24 * PURPOSE:
25 *----------------------------------------------------------------------------
26 * EXAMPLE:
27 *----------------------------------------------------------------------------
28 * NOTE:
29 *----------------------------------------------------------------------------
30 * REQUIREMENTS:
31 *****************************************************************************/
32
33 void getByteLSB(Byte bByte)
34 {
C51 COMPILER V8.01 IO_DRV 08/07/2006 11:16:11 PAGE 8
35 1 Byte i;
36 1
37 1 for (i=0; i<8; i++)
38 1 {
39 2 DTS_CLK = 0;
40 2 if (bByte & 0x01) DTS_DOUT = 1;
41 2 else DTS_DOUT = 0;
42 2 bByte >>= 1;
43 2 DTS_CLK = 1;
44 2 }
45 1 }
46
47 /*F**************************************************************************
48 * NAME: getByteLSB
49 *----------------------------------------------------------------------------
50 * PARAMS:
51 * 寫入一個字節數據info
52 * return:
53 *----------------------------------------------------------------------------
54 * PURPOSE:
55 *----------------------------------------------------------------------------
56 * EXAMPLE:
57 *----------------------------------------------------------------------------
58 * NOTE:
59 *----------------------------------------------------------------------------
60 * REQUIREMENTS:
61 *****************************************************************************/
62
63 int dts_scanByte(void)
64 {
65 1 Byte i;
66 1 char bByte= 11,temp;
67 1
68 1 for (i=0; i<8; i++){
69 2 DTS_CLK = Low;
70 2 if (DTS_DIN){
71 3 temp = 0x80;
72 3 temp >>= i;
73 3 bByte |= temp;
74 3 }
75 2 DTS_CLK = High;
76 2 }
77 1 return (bByte);
78 1 }
79
80 /*F**************************************************************************
81 * NAME: HT1621_getMSB
82 *----------------------------------------------------------------------------
83 * PARAMS:
84 * 寫入一個字節數據info
85 * return:
86 *----------------------------------------------------------------------------
87 * PURPOSE:
88 *----------------------------------------------------------------------------
89 * EXAMPLE:
90 *----------------------------------------------------------------------------
91 * NOTE:
92 *----------------------------------------------------------------------------
93 * REQUIREMENTS:
94 *****************************************************************************/
95
96 void HT1621_getMSB(Byte bByte)
C51 COMPILER V8.01 IO_DRV 08/07/2006 11:16:11 PAGE 9
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -