///////////////////////////////////////////////////////////////////
// 16位累加器測速程序(PACB累加器),PT0口輸入脈沖
//每次記錄脈沖時間可修改宏:TIME_INTER
//author:whut_wj
///////////////////////////////////////////////////////////////////
#include <hidef.h>      /* common defines and macros */
#include <mc9s12dg128.h>     /* derivative information */
#pragma LINK_INFO DERIVATIVE "mc9s12dg128b"

#define TIME_INTER 1000  //1000個ms=1s
unsigned int Get_pulse;


void Start_PLL(void)   //busCLK=32M
{
  REFDV=0x01;          // PLLCLK =2*OSCCLK*(SYNR + 1)/(REFDV + 1)
  SYNR=0x03;	         //        =2*16M*3/2=64M
  asm{
    BRCLR CRGFLG,#$08,*
    BSET CLKSEL,#$80
    }													  
}


void PACBInit()
{
  TCTL4 = 0X02;       //下降沿捕捉脈沖
  PBCTL = 0x40;       //級聯兩個8位累加器(PAC0和PAC1)
  ICPAR = 0X03;       //使能累加器
  PACN10 = 0X0000;
}


void MDCInit(void)
{
  MCCTL = MCCTL&0Xfb; //模數計數器禁止運行
  MCCTL = 0Xe3;       //允許中斷，模數計數方式 
                      //返回時重新加載所用的常數，分頻常數為16 
  MCCTL = MCCTL|0X04; //模數計數器使能
  MCCNT = 2000; //(1/32M)*16*2000= 1ms 
  MCCTL = MCCTL|0X08 ; //把模數常數寄存器的值加載到模數計數器FLMC;
}

 

void main(void) 
{
  DisableInterrupts;
  Start_PLL();
  PACBInit();
  MDCInit();
  EnableInterrupts;
  
  for(;;)
   {

   } 
}


#pragma CODE_SEG __NEAR_SEG NON_BANKED
void interrupt 26 MDC_ISR(void) 
{ 
  static unsigned int number_count;
  MCFLG = 0x80; 
  number_count ++;

  if( number_count==TIME_INTER)        //1秒取一次
    {
    number_count=0;
    Get_pulse = PACN10; 
    PACN10 = 0X0000;

    }
}