/************************************************************************* sdla_chdlc.h	Sangoma Cisco HDLC firmware API definitions Author:      	Gideon Hack		Nenad Corbic <ncorbic@sangoma.com>	 Copyright:	(c) 1995-2000 Sangoma Technologies Inc.		This program is free software; you can redistribute it and/or		modify it under the term of the GNU General Public License		as published by the Free Software Foundation; either version		2 of the License, or (at your option) any later version.===========================================================================  Oct 04, 1999  Nenad Corbic    Updated API support  Jun 02, 1999  Gideon Hack     Changes for S514 usage.  Oct 28, 1998	Jaspreet Singh	Made changes for Dual Port CHDLC.  Jun 11, 1998	David Fong	Initial version.=========================================================================== Organization	- Compatibility notes	- Constants defining the shared memory control block (mailbox)	- Interface commands	- Return code from interface commands	- Constants for the commands (structures for casting data)	- UDP Management constants and structures*************************************************************************/#ifndef _SDLA_CHDLC_H#  define _SDLC_CHDLC_H/*------------------------------------------------------------------------   Notes:	All structres defined in this file are byte-aligned.  	Compiler	Platform	------------------------	GNU C		Linux------------------------------------------------------------------------*/#ifndef	PACKED#define	PACKED __attribute__((packed))#endif	/* PACKED *//* ---------------------------------------------------------------------------- *        Constants defining the shared memory control block (mailbox) * --------------------------------------------------------------------------*/#define PRI_BASE_ADDR_MB_STRUCT 	0xE000 	/* the base address of the mailbox structure on the adapter */#define SEC_BASE_ADDR_MB_STRUCT 	0xE800 	/* the base address of the mailbox structure on the adapter */#define SIZEOF_MB_DATA_BFR		2032	/* the size of the actual mailbox data area */#define NUMBER_MB_RESERVED_BYTES	0x0B	/* the number of reserved bytes in the mailbox header area */#define MIN_LGTH_CHDLC_DATA_CFG  	300 	/* min length of the CHDLC data field (for configuration purposes) */#define PRI_MAX_NO_DATA_BYTES_IN_FRAME  15354 /* PRIMARY - max length of the CHDLC data field */typedef struct {	unsigned char opp_flag PACKED;			/* the opp flag */	unsigned char command PACKED;			/* the user command */	unsigned short buffer_length PACKED;		/* the data length */  	unsigned char return_code PACKED;		/* the return code */	unsigned char MB_reserved[NUMBER_MB_RESERVED_BYTES] PACKED;	/* reserved for later */	unsigned char data[SIZEOF_MB_DATA_BFR] PACKED;	/* the data area */} CHDLC_MAILBOX_STRUCT;typedef struct {        pid_t                   pid_num PACKED;        CHDLC_MAILBOX_STRUCT     cmdarea PACKED;} CMDBLOCK_STRUCT;/* ---------------------------------------------------------------------------- *                        Interface commands * --------------------------------------------------------------------------*//* global interface commands */#define READ_GLOBAL_EXCEPTION_CONDITION	0x01#define SET_GLOBAL_CONFIGURATION	0x02#define READ_GLOBAL_CONFIGURATION	0x03#define READ_GLOBAL_STATISTICS		0x04#define FLUSH_GLOBAL_STATISTICS		0x05#define SET_MODEM_STATUS		0x06	/* set status of DTR or RTS */#define READ_MODEM_STATUS		0x07	/* read status of CTS and DCD */#define READ_COMMS_ERROR_STATS		0x08	#define FLUSH_COMMS_ERROR_STATS		0x09#define SET_TRACE_CONFIGURATION		0x0A	/* set the line trace config */#define READ_TRACE_CONFIGURATION	0x0B	/* read the line trace config */#define READ_TRACE_STATISTICS		0x0C	/* read the trace statistics */#define FLUSH_TRACE_STATISTICS		0x0D	/* flush the trace statistics */#define FT1_MONITOR_STATUS_CTRL		0x1C	/* set the status of the S508/FT1 monitoring */#define SET_FT1_CONFIGURATION		0x18	/* set the FT1 configuration */#define READ_FT1_CONFIGURATION		0x19	/* read the FT1 configuration */#define TRANSMIT_ASYNC_DATA_TO_FT1	0x1A	/* output asynchronous data to the FT1 */#define RECEIVE_ASYNC_DATA_FROM_FT1	0x1B	/* receive asynchronous data from the FT1 */#define FT1_MONITOR_STATUS_CTRL		0x1C	/* set the status of the FT1 monitoring */#define READ_FT1_OPERATIONAL_STATS	0x1D	/* read the S508/FT1 operational statistics */#define SET_FT1_MODE			0x1E	/* set the operational mode of the S508/FT1 module *//* CHDLC-level interface commands */#define READ_CHDLC_CODE_VERSION		0x20	#define READ_CHDLC_EXCEPTION_CONDITION	0x21	/* read exception condition from the adapter */#define SET_CHDLC_CONFIGURATION		0x22#define READ_CHDLC_CONFIGURATION	0x23#define ENABLE_CHDLC_COMMUNICATIONS	0x24#define DISABLE_CHDLC_COMMUNICATIONS	0x25#define READ_CHDLC_LINK_STATUS		0x26#define READ_CHDLC_OPERATIONAL_STATS	0x27#define FLUSH_CHDLC_OPERATIONAL_STATS	0x28#define SET_CHDLC_INTERRUPT_TRIGGERS	0x30	/* set application interrupt triggers */#define READ_CHDLC_INTERRUPT_TRIGGERS	0x31	/* read application interrupt trigger configuration *//* Special UDP drivers management commands */#define CPIPE_ENABLE_TRACING				0x50#define CPIPE_DISABLE_TRACING				0x51#define CPIPE_GET_TRACE_INFO				0x52#define CPIPE_GET_IBA_DATA				0x53#define CPIPE_FT1_READ_STATUS				0x54#define CPIPE_DRIVER_STAT_IFSEND			0x55#define CPIPE_DRIVER_STAT_INTR				0x56#define CPIPE_DRIVER_STAT_GEN				0x57#define CPIPE_FLUSH_DRIVER_STATS			0x58#define CPIPE_ROUTER_UP_TIME				0x59/* Driver specific commands for API */#define	CHDLC_READ_TRACE_DATA		0xE4	/* read trace data */#define TRACE_ALL                       0x00#define TRACE_PROT			0x01#define TRACE_DATA			0x02#define DISCARD_RX_ERROR_FRAMES	0x0001/* ---------------------------------------------------------------------------- *                     Return codes from interface commands * --------------------------------------------------------------------------*/#define COMMAND_OK				0x00/* return codes from global interface commands */#define NO_GLOBAL_EXCEP_COND_TO_REPORT		0x01	/* there is no CHDLC exception condition to report */#define LGTH_GLOBAL_CFG_DATA_INVALID		0x01	/* the length of the passed global configuration data is invalid */#define LGTH_TRACE_CFG_DATA_INVALID		0x01	/* the length of the passed trace configuration data is invalid */#define IRQ_TIMEOUT_VALUE_INVALID		0x02	/* an invalid application IRQ timeout value was selected */#define TRACE_CONFIG_INVALID			0x02	/* the passed line trace configuration is invalid */#define ADAPTER_OPERATING_FREQ_INVALID		0x03	/* an invalid adapter operating frequency was selected */#define TRC_DEAC_TMR_INVALID			0x03	/* the trace deactivation timer is invalid */#define S508_FT1_ADPTR_NOT_PRESENT		0x0C	/* the S508/FT1 adapter is not present */#define INVALID_FT1_STATUS_SELECTION            0x0D    /* the S508/FT1 status selection is invalid */#define FT1_OP_STATS_NOT_ENABLED		0x0D    /* the FT1 operational statistics have not been enabled */#define FT1_OP_STATS_NOT_AVAILABLE		0x0E    /* the FT1 operational statistics are not currently available */#define S508_FT1_MODE_SELECTION_BUSY		0x0E	/* the S508/FT1 adapter is busy selecting the operational mode *//* return codes from command READ_GLOBAL_EXCEPTION_CONDITION */#define EXCEP_MODEM_STATUS_CHANGE		0x10		/* a modem status change occurred */#define EXCEP_TRC_DISABLED			0x11		/* the trace has been disabled */#define EXCEP_IRQ_TIMEOUT			0x12		/* IRQ timeout *//* return codes from CHDLC-level interface commands */#define NO_CHDLC_EXCEP_COND_TO_REPORT		0x21	/* there is no CHDLC exception condition to report */#define CHDLC_COMMS_DISABLED			0x21	/* communications are not currently enabled */#define CHDLC_COMMS_ENABLED			0x21	/* communications are currently enabled */#define DISABLE_CHDLC_COMMS_BEFORE_CFG		0x21	/* CHDLC communications must be disabled before setting the configuration */#define ENABLE_CHDLC_COMMS_BEFORE_CONN		0x21	/* communications must be enabled before using the CHDLC_CONNECT conmmand */#define CHDLC_CFG_BEFORE_COMMS_ENABLED		0x22	/* perform a SET_CHDLC_CONFIGURATION before enabling comms */#define LGTH_CHDLC_CFG_DATA_INVALID 		0x22	/* the length of the passed CHDLC configuration data is invalid */#define LGTH_INT_TRIGGERS_DATA_INVALID		0x22	/* the length of the passed interrupt trigger data is invalid */#define INVALID_IRQ_SELECTED			0x23	/* in invalid IRQ was selected in the SET_CHDLC_INTERRUPT_TRIGGERS */#define INVALID_CHDLC_CFG_DATA			0x23	/* the passed CHDLC configuration data is invalid */#define IRQ_TMR_VALUE_INVALID			0x24	/* an invalid application IRQ timer value was selected */#define LARGER_PERCENT_TX_BFR_REQUIRED		0x24	/* a larger Tx buffer percentage is required */#define LARGER_PERCENT_RX_BFR_REQUIRED		0x25	/* a larger Rx buffer percentage is required */#define S514_BOTH_PORTS_SAME_CLK_MODE		0x26	/* S514 - both ports must have same clock mode */#define INVALID_CMND_HDLC_STREAM_MODE           0x4E    /* the CHDLC interface command is invalid for HDLC streaming mode */#define INVALID_CHDLC_COMMAND			0x4F	/* the defined CHDLC interface command is invalid *//* return codes from command READ_CHDLC_EXCEPTION_CONDITION */#define EXCEP_LINK_ACTIVE			0x30	/* the CHDLC link has become active */#define EXCEP_LINK_INACTIVE_MODEM		0x31	/* the CHDLC link has become inactive (modem status) */#define EXCEP_LINK_INACTIVE_KPALV		0x32	/* the CHDLC link has become inactive (keepalive status) */#define EXCEP_IP_ADDRESS_DISCOVERED		0x33	/* the IP address has been discovered */#define EXCEP_LOOPBACK_CONDITION		0x34	/* a loopback condition has occurred *//* return code from command CHDLC_SEND_WAIT and CHDLC_SEND_NO_WAIT */#define LINK_DISCONNECTED			0x21#define NO_TX_BFRS_AVAIL			0x24/* ---------------------------------------------------------------------------- * Constants for the SET_GLOBAL_CONFIGURATION/READ_GLOBAL_CONFIGURATION commands * --------------------------------------------------------------------------*//* the global configuration structure */typedef struct {	unsigned short adapter_config_options PACKED;	/* adapter config options */	unsigned short app_IRQ_timeout PACKED;		/* application IRQ timeout */	unsigned long adapter_operating_frequency PACKED;	/* adapter operating frequency */} GLOBAL_CONFIGURATION_STRUCT;/* settings for the 'app_IRQ_timeout' */#define MAX_APP_IRQ_TIMEOUT_VALUE	5000	/* the maximum permitted IRQ timeout *//* ---------------------------------------------------------------------------- *             Constants for the READ_GLOBAL_STATISTICS command * --------------------------------------------------------------------------*//* the global statistics structure */typedef struct {	unsigned short app_IRQ_timeout_count PACKED;} GLOBAL_STATS_STRUCT;/* ---------------------------------------------------------------------------- *             Constants for the READ_COMMS_ERROR_STATS command * --------------------------------------------------------------------------*//* the communications error statistics structure */typedef struct {	unsigned short Rx_overrun_err_count PACKED;	unsigned short CRC_err_count PACKED;	/* receiver CRC error count */	unsigned short Rx_abort_count PACKED; 	/* abort frames recvd count */	unsigned short Rx_dis_pri_bfrs_full_count PACKED;/* receiver disabled */	unsigned short comms_err_stat_reserved_1 PACKED;/* reserved for later */	unsigned short sec_Tx_abort_msd_Tx_int_count PACKED; /* secondary - abort frames transmitted count (missed Tx interrupt) */	unsigned short missed_Tx_und_int_count PACKED;	/* missed tx underrun interrupt count */        unsigned short sec_Tx_abort_count PACKED;   /*secondary-abort frames tx count */	unsigned short DCD_state_change_count PACKED; /* DCD state change */	unsigned short CTS_state_change_count PACKED; /* CTS state change */} COMMS_ERROR_STATS_STRUCT;/* ---------------------------------------------------------------------------- *                  Constants used for line tracing * --------------------------------------------------------------------------*//* the trace configuration structure (SET_TRACE_CONFIGURATION/READ_TRACE_CONFIGURATION commands) */typedef struct {	unsigned char trace_config PACKED;		/* trace configuration */	unsigned short trace_deactivation_timer PACKED;	/* trace deactivation timer */	unsigned long ptr_trace_stat_el_cfg_struct PACKED;	/* a pointer to the line trace element configuration structure */} LINE_TRACE_CONFIG_STRUCT;/* 'trace_config' bit settings */#define TRACE_INACTIVE		0x00	/* trace is inactive */#define TRACE_ACTIVE		0x01	/* trace is active */#define TRACE_DELAY_MODE	0x04	/* operate the trace in delay mode */#define TRACE_DATA_FRAMES	0x08	/* trace Data frames */#define TRACE_SLARP_FRAMES	0x10	/* trace SLARP frames */#define TRACE_CDP_FRAMES	0x20	/* trace CDP frames *//* the line trace status element configuration structure */typedef struct {	unsigned short number_trace_status_elements PACKED;	/* number of line trace elements */	unsigned long base_addr_trace_status_elements PACKED;	/* base address of the trace element list */	unsigned long next_trace_element_to_use PACKED;	/* pointer to the next trace element to be used */	unsigned long base_addr_trace_buffer PACKED;		/* base address of the trace data buffer */	unsigned long end_addr_trace_buffer PACKED;		/* end address of the trace data buffer */} TRACE_STATUS_EL_CFG_STRUCT;