#include          "msp430x44x.h" // Standard Equations
;******************************************************************************
;   MSP-FET430P440 Demo - ADC12, Using an External Reference 
;
;   Description: This program will show how to use an external positive 
;                reference for the ADC12.
;
;   This example shows how to use an external positive reference for the ADC12.
;   The external reference is applied to the VeREF+ pin. Avss is used for the
;   negative reference. A single conversion is performed on channel A0. The 
;   conversion results are stored in ADC12MEM0 and are moved to R5 after the 
;   conversion is complete. Test by applying a voltage to channel A0, then 
;   setting and running to a break point at "jmp Mainloop". To view the 
;   conversion results, open a register window in C-Spy and view the contents 
;   of R5.
;
;
;                     MSP430F449
;                   ---------------
;                  |               |
;                  |      A0 (P6.0)|<---- Vin
;                  |               |
;        REF ----->| VeREF+        |
;                  |               |
;
;
;       M.Mitchell
;       Texas Instruments, Inc
;       January, 2002
;******************************************************************************
;------------------------------------------------------------------------------ 
main        ORG     01100h                  ; Program Start
;------------------------------------------------------------------------------ 
RESET       mov     #0A00h,SP               ; Initialize stackpointer
StopWDT     mov     #WDTPW+WDTHOLD,&WDTCTL  ; Stop watchdog
            bis.b   #BIT0,&P6SEL            ; Enable A/D channel A0
                                            ;
SetupADC12  mov     #ADC12ON+SHT0_2,&ADC12CTL0  ; turn on ADC12, set samp time
            mov     #SHP,&ADC12CTL1         ; Use sampling timer
            mov.b   #SREF_2,&ADC12MCTL0     ; Vr+=VeREF+ (external)
            bis     #ENC,&ADC12CTL0         ; Enable conversions
                                            ;            
Mainloop    bis     #ADC12SC,&ADC12CTL0     ; Start conversions
testIFG     bit     #BIT0,&ADC12IFG         ; Conversion done?
            jz      testIFG                 ; No, test again
            mov     &ADC12MEM0, R5          ; Move result
            jmp     Mainloop                ; SET BREAKPOINT HERE
                                            ;
;------------------------------------------------------------------------------ 
;           Interrupt Vectors        
;------------------------------------------------------------------------------
            ORG     0FFFEh                  ; MSP430 RESET Vector
            DW      RESET                   ;
            END