#include    "msp430x44x.h";  MSP430x44x Standard Definitions
;*******************************************************************************
;   MSP-FET430P440 Demo - FLL+ clock, runs internal DCO at8 Mhz
;
;   Description "FET440_8MhzDCO": This program demostrates setting the internal
;   DCO to run at 8Mhz with auto-calibration by the FLL+.
;   ACLK = LFXT1 = 32768, MCLK = SMCLK = DCOCLK = (n+1) x 2 x ACLK 
;   //*An external watch crystal is required on XIN/XOUT for ACLK*//	  
;
;                MSP430F449
;             -----------------
;         /|\|              XIN|-  
;          | |                 | 32khz xtal
;          --|RST          XOUT|-                                       
;            |                 |
;            |             P1.1|--> MCLK = 8Mhz
;            |                 |
;            |             P1.5|--> ACLK = 32khz
;            |                 |
;
;   B. Merritt - meb
;   Texas Instruments Inc.
;   February 2002
;------------------------------------------------------------------------------ 
            ORG     01100h                  ; Program Start
;------------------------------------------------------------------------------ 
RESET       mov.w   #0A00h,SP               ; Initialize '449 stackpointer
SetupWDT    mov.w   #WDTPW+WDTHOLD,&WDTCTL  ;stop WDT
SetupFLL2   bis.b   #FN_4,&SCFI0            ; x2 DCO, 8MHz nominal DCO  
            bis.b   #DCOPLUS+XCAP14PF,&FLL_CTL0 ; DCO+, configure load caps
            mov.b   #121,&SCFQCTL           ;(121+1) x 2 x 32768 = 7.99 Mhz
SetupPorts  bis.b   #022h,&P1DIR            ;P1.1 & P1.5 to output direction
            bis.b   #022h,&P1SEL            ;P1.1 & P1.5 to output MCLK & ACLK
                                            ;
Mainloop    jmp     Mainloop                ;loop with CPU running
                                            ;
;----------------------------------------------------------------------------- 
;           MSP430F43x/44x interrupt vectors used         
;----------------------------------------------------------------------------- 
            ORG     0FFFEh                  ; MSP430 RESET Vector
            DW      RESET                   ; 
            END