?? os_cpu_a.s
字號:
BIT_TIMER0 EQU (0x1<<13)
I_ISPC EQU 0x1e00024
INTMSK EQU 0x1e0000c
AREA |subr|, CODE, READONLY
IMPORT OSTCBCur
addr_OSTCBCur DCD OSTCBCur
IMPORT OSTCBHighRdy
addr_OSTCBHighRdy DCD OSTCBHighRdy
IMPORT OSPrioCur
addr_OSPrioCur DCD OSPrioCur
IMPORT OSPrioHighRdy
addr_OSPrioHighRdy DCD OSPrioHighRdy
IMPORT OSRunning
IMPORT OSIntEnter
IMPORT OSIntExit
IMPORT OSTimeTick
IMPORT EInt4567Isr
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Function: OSStartHighRdy ;
; Purpose: To start the task with the highest priority during OS startup ;
; Processing: See uC/OS-II Task Level Context Switch flow chart ;
; Parameters: void ;
; Outputs: None ;
; Returns: void ;
; Notes: Called once during OSStart() ;
EXPORT OSStartHighRdy
OSStartHighRdy
LDR r0, =OSRunning ; OSRunning = 1
MOV r1, #1
STRB r1, [r0]
; LDR r4, addr_OSTCBCur ; Get current task TCB address
LDR r5, addr_OSTCBHighRdy ; Get highest priority task TCB address
LDR r5, [r5] ; get stack pointer
LDR sp, [r5] ; switch to the new stack
; STR r5, [r4] ; set new current task TCB address
LDMFD sp!, {r4} ; get new state from top of the stack
MSR CPSR_cxsf, r4 ; CPSR should be SVC32Mode
LDMFD sp!, {r0-r12, lr, pc } ; start the new task
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Function: OS_TASK_SW ;
; Purpose: To perform a context switch from the Task Level. ;
; Processing: See uC/OS-II Task Level Context Switch flow chart ;
; Parameters: void ;
; Outputs: None ;
; Returns: void ;
; Notes: The whole function is executed in CRITICAL state. See OSSched(). ;
; ;
; On entry, OSTCBCur and OSPrioCur hold the current TCB and priority ;
; and OSTCBHighRdy and OSPrioHighRdy contain the same for the task ;
; to be switched to. ;
; The following code assumes that the virtual memory is directly ;
; mapped into physical memory. If this is not true, the cache must ;
; be flushed at context switch to avoid address aliasing. ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
EXPORT OSCtxSw
OSCtxSw
STMFD sp!, {lr} ; save pc
STMFD sp!, {lr} ; save lr
STMFD sp!, {r0-r12} ; save register file and ret address
MRS r4, CPSR
STMFD sp!, {r4} ; save current PSR
LDR r4, addr_OSTCBCur
LDR r5, [r4]
STR sp, [r5] ; store sp in preempted tasks TCB
; OSPrioCur = OSPrioHighRdy
LDR r4, addr_OSPrioCur
LDR r5, addr_OSPrioHighRdy
LDRB r6, [r5]
STRB r6, [r4]
; OSTCBCur = OSTCBHighRdy
LDR r4, addr_OSTCBHighRdy
LDR r5, addr_OSTCBCur
LDR r4, [r4]
STR r4, [r5]
LDR sp, [r4]
LDMFD sp!, {r4} ; YYY+
MSR CPSR_cxsf, r4 ; YYY+
LDMFD sp!, {r0-r12, lr, pc} ; YYY+
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Function: OSIntCtxSW ;
; Purpose: To perform a context switch from the Interrupt Level. ;
; Processing: See uC/OS-II Interrupt Level Context Switch flow chart ;
; Parameters: void ;
; Outputs: None ;
; Returns: void ;
; Notes: The whole function is executed in CRITICAL state. See OSIntExit(). ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
EXPORT OSIntCtxSw
OSIntCtxSw
;OSPrioCur = OSPrioHighRdy
LDR r6, addr_OSPrioHighRdy
LDR r5, addr_OSPrioCur
LDRB r6, [r6]
STRB r6, [r5]
;OSTCBCur = OSTCBHighRdy
LDR r4, addr_OSTCBHighRdy
LDR r5, addr_OSTCBCur
LDR r4, [r4]
STR r4, [r5]
LDR sp, [r4]
LDMFD sp!, {r4} ; pop new task cpsr
MSR cpsr_cxsf, r4
LDMFD sp!, {r0-r12,lr,pc} ; pop new task r0-r12,lr & pc
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Function: OSTickISR ;
; Purpose: Timer0 Interrupt Sever ;
; Processing: Call OSTimeTick ;
; Parameters: void ;
; Outputs: None ;
; Returns: void ;
; Notes: ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
LINK_SAVE DCD 0
PSR_SAVE DCD 0
EXPORT OSTickISR
OSTickISR
STMFD sp!, {r4}
LDR r4, =LINK_SAVE
STR lr, [r4] ; LINK_SAVE = lr_irq
MRS lr, spsr
STR lr, [r4, #4] ; PSR_SAVE = spsr_irq
LDMFD sp!, {r4}
ORR lr, lr, #0x80 ; Mask irq for context switching before
MSR cpsr_cxsf, lr ; returning back from irq mode.
SUB sp, sp, #4 ; Space for PC
STMFD sp!, {r0-r12, lr}
LDR r4, =LINK_SAVE
LDR lr, [r4, #0]
SUB lr, lr, #4 ; lr = LINK_SAVE - 4,
STR lr, [sp, #(14*4)] ; the return address for pc.
LDR r4, [r4, #4] ; r4 = PSR_SAVE,
STMFD sp!, {r4} ; CPSR of the task
LDR r4, addr_OSTCBCur
LDR r4, [r4]
STR sp, [r4] ; OSTCBCur -> stkptr = sp
LDR r0, =I_ISPC
LDR r1, =BIT_TIMER0
STR r1, [r0]
BL OSIntEnter
BL OSTimeTick
BL OSIntExit
LDMFD sp!, {r4} ; pop new task cpsr
MSR cpsr_cxsf, r4
LDMFD sp!, {r0-r12,lr,pc} ; pop new task r0-r12,lr & pc
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Functions: ARMDisableInt ARMEnableInt ;
; Purpose: Disable and enable IRQ and FIQ preserving current CPU mode. ;
; Processing: Push the cpsr onto the stack, Disable IRQ and FIQ interrupts, Return ;
; Parameters: void ;
; Outputs: None ;
; Returns: void ;
; Notes: ;
; (1) Can be called from SVC mode to protect Critical Sections. ;
; (2) Do not use these calls at interrupt level. ;
; (3) Used in pairs within the same function level; ;
; (4) Will restore interrupt state when called; i.e., if interrupts ;
; are disabled when DisableInt is called, interrupts will still ;
; still be disabled when the matching EnableInt is called. ;
; (5) Uses the method described by Labrosse as "Method 2". ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
EXPORT ARMDisableInt
ARMDisableInt
MRS r0, cpsr
STMFD sp!, {r0} ; push current PSR
ORR r0, r0, #0xC0
MSR cpsr_c, r0 ; disable IRQ Int s
MOV pc, lr
EXPORT ARMEnableInt
ARMEnableInt
LDMFD sp!, {r0} ; pop current PSR
MSR cpsr_c, r0 ; restore original cpsr
MOV pc, lr
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; CRITICAL SECTION METHOD 3 FUNCTIONS
;
; Description: Disable/Enable interrupts by preserving the state of interrupts. Generally speaking you
; would store the state of the interrupt disable flag in the local variable 'cpu_sr' and then
; disable interrupts. 'cpu_sr' is allocated in all of uC/OS-II's functions that need to
; disable interrupts. You would restore the interrupt disable state by copying back 'cpu_sr'
; into the CPU's status register.
; OS_CPU_SR OSCPUSaveSR()
; Arguments : none
; Returns : OS_CPU_SR
; OSCPURestoreSR(OS_CPU_SR cpu_sr)
; Arguments : OS_CPU_SR
; Returns : none
; Note(s) : These functions are used in general like this,
;
; void Task (void *data)
; {
; #if OS_CRITICAL_METHOD == 3 /* Allocate storage for CPU status register */
; OS_CPU_SR cpu_sr;
; #endif
; :
; :
; OS_ENTER_CRITICAL(); /* cpu_sr = OSCPUSaveSR(); */
; :
; :
; OS_EXIT_CRITICAL(); /* OSCPURestoreSR(cpu_sr); */
; :
; :
; }
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
EXPORT OSCPUSaveSR
OSCPUSaveSR
MRS r0,cpsr
ORR r1,r0,#0xC0
MSR cpsr_c,r1
MOV pc,lr
EXPORT OSCPURestoreSR
OSCPURestoreSR
MSR cpsr_c,r0
MOV pc,lr
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
K_LINK_SAVE DCD 0
K_PSR_SAVE DCD 0
EXPORT OSEINT4567ISR
OSEINT4567ISR
STMFD sp!, {r4}
LDR r4, =K_LINK_SAVE
STR lr, [r4] ; LINK_SAVE = lr_irq
MRS lr, spsr
STR lr, [r4, #4] ; PSR_SAVE = spsr_irq
LDMFD sp!, {r4}
ORR lr, lr, #0x80 ; Mask irq for context switching before
MSR cpsr_cxsf, lr ; returning back from irq mode.
SUB sp, sp, #4 ; Space for PC
STMFD sp!, {r0-r12, lr}
LDR r4, =K_LINK_SAVE
LDR lr, [r4, #0]
SUB lr, lr, #4 ; lr = LINK_SAVE - 4,
STR lr, [sp, #(14*4)] ; the return address for pc.
LDR r4, [r4, #4] ; r4 = PSR_SAVE,
STMFD sp!, {r4} ; CPSR of the task
LDR r4, addr_OSTCBCur
LDR r4, [r4]
STR sp, [r4] ; OSTCBCur -> stkptr = sp
BL OSIntEnter
BL EInt4567Isr
BL OSIntExit
LDMFD sp!, {r4} ; pop new task cpsr
MSR cpsr_cxsf, r4
LDMFD sp!, {r0-r12,lr,pc} ; pop new task r0-r12,lr & pc
END
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -